Uživatelská příručka k systému okamžitého dávkovače teplé a studené vody InSinkErator HOT250

1. Úvod

The InSinkErator HOT250 Instant Hot and Cold Water Dispenser System provides immediate access to near-boiling water (approximately 200°F) and filter-ready cold water directly from your kitchen sink. This system is designed for convenience, enhancing daily kitchen routines such as cooking, preparing beverages, and cleaning. The durable metal faucet features a transitional style in satin nickel, complementing various kitchen decors. Its 360-degree swivel spout and pull-forward handles offer flexible use, while the spring-loaded hot water safety handle ensures automatic shut-off upon release.

Figure 1: InSinkErator HOT250 Instant Hot and Cold Water Dispenser in Satin Nickel.

2. Bezpečnostní informace

Please read and understand all safety instructions before installing or operating this appliance. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Elektrická bezpečnost: Ensure the unit is connected to a properly grounded 120V AC outlet. Do not use extension cords. Disconnect power before servicing.
• Bezpečnost při používání teplé vody: The dispenser provides near-boiling water. Exercise extreme caution to prevent scalding. The hot water handle is spring-loaded for automatic shut-off.
• Instalace: Installation should comply with all local plumbing and electrical codes. If you are unsure, consult a qualified professional.
• Vodovod: Před zahájením instalace se ujistěte, že je přívod vody uzavřen.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Faucet (Satin Nickel)
• Hot Water Tank (2/3-Gallon, Stainless Steel)
• Přívodní vedení
• Montážní hardware

4. Specifikace

Figure 2: Detailed dimensions of the HOT250 faucet and instant hot water tank.

5. Nastavení a instalace

The InSinkErator HOT250 system is designed for easy DIY installation, requiring a standard 1 3/8-inch hole for the faucet and an under-sink electrical outlet. Tool-free tank connections simplify the process.

Požadované komponenty:

• Standard 1-3/8" Sink Hole
• Dedicated Electrical Outlet (under sink)

Figure 3: Visual representation of the required sink hole and electrical outlet for installation.

Kroky instalace:

1. Turn off water and install faucet: Ensure the main water supply is off. Install the faucet into the designated sink hole, securing it with the provided mounting hardware.
2. Connect water lines, turn on water, and fill tank: Connect the hot and cold water supply lines to the faucet and tank. Turn on the water supply and allow the tank to fill completely before plugging in.
3. Plug in the tank to heat: Once the tank is filled, plug the power cord into the dedicated under-sink electrical outlet. The unit will begin heating the water.

6. Návod k obsluze

The HOT250 provides instant hot and cold water with intuitive controls.

Výdej horké vody:

To dispense near-boiling water, pull the hot water handle forward. The handle is spring-loaded and will automatically return to the off position when released, ensuring safety.

Výdej studené vody:

To dispense filter-ready cold water, pull the cold water handle forward. This handle also features an automatic shut-off mechanism.

Nastavení teploty vody:

The hot water tank features an adjustable thermostat, allowing you to set the temperature between 160°F and 210°F. Locate the temperature dial on the front of the tank and rotate it to your desired setting.

Figure 4: The HOT250 faucet handles for instant hot and cold water dispensing.

Figure 5: The spring-loaded hot water handle ensures automatic shut-off for safety.

7. Údržba

Regular maintenance ensures optimal performance and longevity of your InSinkErator HOT250 system.

Výměna filtru:

If an InSinkErator water filter is installed, replace it regularly (typically every 6 months) to maintain water quality and taste. Refer to your filter's specific instructions for replacement procedures.

Figure 6: Illustration of an optional InSinkErator Filtration System for improved water quality.

Čištění:

Clean the exterior of the faucet and tank with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.

8. Řešení problémů

If you experience issues with your HOT250 system, refer to the following common troubleshooting tips:

• Žádná horká voda: Check if the unit is plugged in and the electrical outlet is functioning. Ensure the temperature dial on the tank is set correctly. Verify the water supply is on.
• Úniky vody: Inspect all connections for tightness. If a leak persists, turn off the water supply and contact customer support.
• Pomalý tok vody: Check if the water supply valve is fully open. If a filter is installed, it may need replacement.
• Neobvyklé zvuky: Some gurgling or hissing is normal during heating. Excessive noise may indicate air in the system; allow water to run for a few minutes to purge air.

9. Záruka a podpora

The InSinkErator HOT250 Instant Hot and Cold Water Dispenser System is backed by InSinkErator's 3-Year "We Come to You" Limited Service Warranty. This warranty covers parts and in-home labor for defects in material or workmanship.

Pro záruční servis:

Contact InSinkErator customer support directly. Have your model number (HOT250 or HC250SN-SS) and date of purchase available.

Figure 7: InSinkErator's 'We Come to You' 3-Year In-Home Limited Service Warranty details.

10. Compliance & Certifications

The InSinkErator HOT250 system adheres to strict quality and safety standards:

• Lead-Free: Compliant with NSF/ANSI/CAN 372 and NSF/ANSI/CAN 61: Q<1 lead-free standards.
• Reverse Osmosis Compatible: NSF 58 Certification for use with reverse osmosis systems.
• Kvalita a bezpečnost: Meets ASME A112.18.1/CSA B125.1-18 Performance, Reliability and Consistency, ASSE 1023 - Performance, and cULus / UL Listed Trusted Electrical Safety standards.
• Vyhovující ADA: Designed to meet Americans with Disabilities Act standards.