AQQA LED Aquarium Light User Manual

1. Úvod

This manual provides instructions for the AQQA LED Aquarium Light, Model GUS-AQ045-14W-US. This full-spectrum LED light is designed to support aquatic plant growth and enhance the vibrant colors of fish in aquariums ranging from 12 to 18 inches. It features a 24/7 natural mode, adjustable brightness, multiple color options, and integrated timer functions.

2. Bezpečnostní pokyny

• Před použitím si přečtěte všechny pokyny.
• Do not operate if the unit or cord is damaged.
• Zajistěte napájení objtage odpovídá požadavkům produktu.
• Keep the power adapter and controller dry. Do not immerse them in water.
• Always unplug the light from the power outlet before performing any maintenance or cleaning.
• This product is designed for indoor aquarium use only.
• Nepokoušejte se svítidlo rozebírat ani upravovat.

3. Nastavení

3.1 Obsah balení

• AQQA LED Aquarium Light
• Extendable Brackets (2 pcs)
• Power Adapter with Controller
• Uživatelská příručka

3.2 kroky instalace

1. Připevněte držáky: Slide the extendable brackets onto both ends of the LED light fixture. Ensure they are securely fastened.
2. Obrysové světlo: Place the assembled light fixture on top of your aquarium. Adjust the extendable brackets to fit the width of your tank (12-18 inches).
3. Připojte napájení: Plug the power adapter into the controller, then plug the controller into the light fixture. Finally, plug the power adapter into a suitable electrical outlet.

4. Návod k obsluze

The AQQA LED Aquarium Light is controlled via an inline controller with multiple buttons for various functions.

4.1 Základní funkce

• Zapnutí/vypnutí: Krátce stiskněte tlačítko napájení (ON/OFF) to turn the light on. Long press to turn it off.
• Nastavení jasu: Use the brightness buttons (+/-) to cycle through 10 levels of brightness, from 10% to 100%.
• Výběr barvy: Short press the color switch button (M) to cycle through 10 available colors.

4.2 Přirozený režim 24/7

This mode simulates a natural 24-hour light cycle, including sunrise, midday, sunset, and moonlight phases. This promotes a healthier environment for aquatic life.

• Aktivace: Press the 24/7 button on the controller.
• Výchozí rozvrh: The light defaults to turning on at 6 AM and off at 10:30 PM.
• Adjustable Start Time: The start time can be set to 6 AM, 7 AM, or 8 AM. Refer to the controller diagram for specific button presses to adjust.

4.3 Timer Functions (6H/8H/12H)

The built-in timer allows you to set the light to operate for a specific duration each day.

• Nastavení časovače: Press the timer button to select 6H, 8H, or 12H. The light will automatically turn on and off at the set time daily.
• Gradual Brightening: After selecting a timer duration, the light will gradually brighten from 1% to the set brightness level over 15 minutes to avoid startling fish.

4.4 Režim „udělej si sám“

Customize the RGB brightness to create specific lighting conditions tailored to your aquarium's inhabitants and plants.

• Aktivace: Press the DIY button on the controller.
• Nastavení: Use the color adjustment buttons (e.g., R, G, B) to independently control the intensity of red, green, and blue LEDs.

5. Údržba

5.1 Čištění

• Před čištěním vždy odpojte světlo ze zásuvky.
• Otřete svítidlo měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Před opětovným zapojením se ujistěte, že je světlo zcela suché.

5.2 Hydroizolace

The light fixture has an IP67 waterproof rating, protecting it from water intrusion and humidity. However, the power adapter and controller are not waterproof and must be kept dry.

6. Řešení problémů

7. Specifikace