Uživatelská příručka k benzínové vyžínači a křovinořezu eSkde 52cc

Zavedení

Thank you for choosing the eSkde 52cc Petrol Strimmer and Brush Cutter. This powerful 2-in-1 garden tool is designed for efficient trimming of grass and cutting through dense brush. To ensure safe and optimal performance, please read this manual thoroughly before assembly, operation, or maintenance. Keep this manual for future reference.

Bezpečnostní informace

Vaše bezpečnost je prvořadá. Vždy dodržujte následující bezpečnostní pokyny:

• Always wear appropriate protective clothing, including eye protection, hearing protection, sturdy footwear, and gloves, when using this product.
• Be aware of potential flying debris and keep bystanders, children, and pets at a safe distance (at least 15 meters/50 feet) from the operating area.
• Always use the double shoulder harness for stability, control, and to minimize strain on the operator.
• Ensure the work area is clear of obstacles, rocks, and other objects that could be thrown by the cutting attachment.
• Never operate the strimmer/brush cutter when fatigued, under the influence of alcohol, drugs, or medication.
• Handle fuel with extreme care. Mix and refuel in a well-ventilated area, away from open flames or sparks. Do not smoke while handling fuel.
• Before performing any maintenance, cleaning, or when transporting the unit, always switch off the engine and ensure all moving parts have stopped.

Komponenty skončilyview

Familiarize yourself with the main components of your eSkde Petrol Strimmer and Brush Cutter.

Obrázek 1: All components of the eSkde 52cc Petrol Strimmer and Brush Cutter, including the engine unit, shaft, bull horn handles, brush cutter blade, nylon strimmer head, fuel mixing bottle, tools, and double shoulder harness.

Obrázek 2: The double shoulder harness, designed for comfortable weight distribution and reduced operator fatigue during extended use.

Obrázek 3: The hardened metal brush cutter blade, ideal for tackling thick brush, brambles, and dense weeds.

Obrázek 4: The nylon strimmer head, used for precise trimming of grass and edging lawns.

Nastavení a montáž

The eSkde strimmer requires some assembly before first use. Follow these steps carefully:

1. Vybalte a zkontrolujte: Carefully remove all components from the packaging. Check for any damage or missing parts. Refer to Figure 1 for a complete overview.
2. Sestavte hřídel: Connect the two sections of the shaft if they are separate. Ensure they click securely into place.
3. Připevnit rukojeti: Secure the bull horn handles to the main shaft using the provided clamps and bolts. Adjust their position for comfortable operation.
4. Mount Engine Unit: Attach the engine unit to the upper part of the shaft, ensuring all connections are firm.
5. Instalace ochrany: Secure the safety guard over the cutting head area. This guard is crucial for protecting the operator from debris.
6. Choose Cutting Attachment:
   • For Nylon Strimmer Head: Attach the nylon head (Figure 4) to the gearbox spindle. Ensure it is tightened securely.
   • Pro čepel křovinořezu: Attach the metal blade (Figure 3) to the gearbox spindle. Use the provided washers and nut, ensuring the blade is oriented correctly and tightened firmly. Always use the appropriate blade guard when using the metal blade.
7. Attach Harness: Connect the double shoulder harness (Figure 2) to the designated attachment point on the shaft. Adjust the harness straps to ensure the unit is balanced and comfortable when worn, allowing for easy control.

Obrázek 5: The fully assembled eSkde strimmer, ready for use with either the nylon head or brush cutter blade.

Obrázek 6: Detailní view of the engine unit connected to the shaft, showing the control handles and throttle trigger.

Fueling and Starting

This strimmer uses a 2-stroke petrol engine. Proper fuel mixture is critical for engine longevity.

Směs paliva:

Mix unleaded petrol with high-quality 2-stroke engine oil at a ratio of 25:1 (Petrol:Oil). Use the provided mixing bottle for accurate measurement. Shake the mixture thoroughly before pouring into the fuel tank.

Obrázek 7: The engine unit, showing the fuel tank and recoil pull start mechanism. Note the "eSkde BC52-S23" model designation on the engine casing.

Startovací postup:

1. Fill the fuel tank with the correct petrol/oil mixture (Figure 7). Securely close the fuel cap.
2. Umístěte jednotku na rovný a stabilní povrch.
3. Set the choke lever to the "CLOSED" (start) position.
4. Několikrát stiskněte pumpičku s pumpičkou, dokud v průhledném zpětném potrubí neuvidíte palivo.
5. Pull the starter cord firmly and smoothly until the engine fires (usually 1-3 pulls). Do not pull the cord to its full extension.
6. Once the engine fires, immediately move the choke lever to the "OPEN" (run) position.
7. Znovu zatáhněte za startovací šňůru, dokud motor nenaskočí a nebude běžet hladce.
8. Allow the engine to warm up for 30-60 seconds before applying full throttle.

Návod k obsluze

Během provozu vždy používejte vhodné bezpečnostní pomůcky.

Using the Nylon Strimmer Head:

• Ideal for trimming grass, edging lawns, and light vegetation.
• Hold the strimmer with both hands, using the bull horn handles for control.
• Maintain a steady throttle. Move the cutting head in a sweeping motion, parallel to the ground.
• To advance the nylon line, tap the strimmer head gently on the ground while the engine is running at full throttle.

Using the Brush Cutter Blade:

• Suitable for cutting thick weeds, brambles, and small woody growth.
• Ensure the metal blade (Figure 3) is securely attached and the correct blade guard is in place.
• Approach the material to be cut slowly and deliberately. Avoid striking hard objects.
• Use a controlled, sweeping motion. Be aware of kickback, especially when cutting thicker material.

Obrázek 8: The eSkde strimmer equipped with the brush cutter blade, ready for heavy-duty clearing tasks.

Zastavení motoru:

Release the throttle trigger and allow the engine to idle down. Press the engine stop switch to turn off the engine. Wait for all moving parts to come to a complete stop before setting the unit down.

Údržba

Regular maintenance ensures the longevity and safe operation of your strimmer.

• Čištění: After each use, clean the exterior of the unit, especially the cutting head and engine cooling fins, to prevent debris buildup. Use a damp hadříkem; nepoužívejte vodu pod vysokým tlakem.
• Vzduchový filtr: Check and clean the air filter regularly (every 5-10 hours of operation, or more frequently in dusty conditions). A dirty air filter can reduce engine performance.
• Zapalovací svíčka: Inspect the spark plug periodically. Clean or replace if it is fouled or worn. Refer to the engine specifications for the correct spark plug type and gap.
• Řezné příslušenství:
  • Nylon Head: Replace the nylon line when it becomes too short. Ensure the correct diameter line is used.
  • Čepel křovinořezu: Inspect the blade for sharpness and damage. Sharpen or replace as needed. A dull or damaged blade can cause excessive vibration and reduce cutting efficiency.
• Palivový systém: Pro dlouhodobé skladování (déle než 30 dní) vypusťte palivovou nádrž a nechte motor běžet, dokud se nezastaví, aby se karburátor vyčistil od paliva. Tím se zabrání degradaci paliva a jeho zatuhnutí.
• Mazání: Consult the manual for specific lubrication points, typically the gearbox at the cutting head.

Odstraňování problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

If problems persist after attempting these solutions, please contact eSkde customer support or a qualified service technician.

Specifikace

Záruka a podpora

eSkde products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official eSkde webmísto.

If you encounter any issues or require technical assistance, please contact eSkde customer support. When contacting support, please have your model number (BC52-S23) and purchase details ready.