Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your HALO SBL10A50GY Solar Powered 1000 Lumen LED Security Area Light. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Konec produktuview
The HALO SBL10A50GY is an all-in-one solar-powered LED security area light designed for outdoor residential, rural, and off-grid applications. It features a heavy-duty polycarbonate housing, an integrated LED, and a solar panel.
Klíčové vlastnosti:
- Provoz mimo síť: Completely free to operate with no wiring required.
- All-in-One Design: Integrated LED, solar panel, and battery for simplified installation.
- Jas: 1000 lumens at 5000K color temperature.
- Pohybový senzor: 120° detection range and 25’ distance.
- Provozní režimy: Three selectable modes configurable with an included RF remote control.
- Funkce od soumraku do úsvitu: Automatic operation based on ambient light.
- Odolná konstrukce: Heavy-duty and UV resistant polycarbonate housing.
Komponenty:
The HALO SBL10A50GY fixture includes the following components:
- Solar LED Security Area Light Fixture
- Remote Control (requires 2 x AAA batteries, included)
- Montážní šrouby a podložky
Image: Diagram illustrating the main components of the SBL Solar Area Light, highlighting the integrated LED, motion sensor, and the all-in-one solar panel design. The remote control is also shown.
Nastavení a instalace
Before installation, ensure the chosen location receives unobstructed sunlight for optimal charging. The fixture can be mounted up to 15 feet high on a pole or wall.
Pole Mount Installation (Pole Sold Separately):
- Slide the fixture onto a compatible tenon pole (sold separately).
- Tighten the set screw located on the bottom of the fixture to secure it to the pole.
Montáž na stěnu:
- Position the fixture against the desired wall surface.
- Using the fixture as a template, pre-drill three holes for the mounting screws.
- Insert the bottom two wood screws and washers, but do not fully tighten them. Leave a small gap.
- Slide the fixture over the two partially tightened bottom screws.
- Insert and tighten the top screw.
- Fully tighten all three screws to secure the fixture firmly to the wall.
Image: Visual guide for easy installation, showing both pole mount and wall mount options, and the remote control.
Video: This video demonstrates the installation process for the HALO Outdoor SBL Solar Flood Light, including both pole and wall mounting techniques.
Návod k obsluze
The HALO SBL10A50GY features three selectable modes of operation, controlled by the included RF remote.
Počáteční zapnutí:
After installation, hold the green ON/OFF power button on the fixture for approximately 3 seconds until the light illuminates. This initializes the unit.
Image: The solar light charging during the day and providing illumination at night, highlighting its quick charge time and runtime.
Funkce dálkového ovládání:
Use the remote control to select operating modes and adjust settings.
- ON/OFF: Turns the fixture on or off.
- POHYB: Activates Motion Activated Mode.
- DTD (Dusk-to-Dawn): Activates Dusk-to-Dawn Mode.
- MOTION+DTD: Activates Dusk-to-Dawn + Motion Activated Mode.
- 30S/60S/90S: Sets the duration for 100% brightness in motion-activated modes.
Provozní režimy:
The fixture offers three distinct operating modes to suit various needs:
Image: A visual explanation of the three operational modes: Motion Activated, Dusk to Dawn, and a combination of both, detailing how the light behaves in each scenario.
- Režim aktivovaný pohybem:
- The fixture remains off until motion is detected.
- Upon motion detection, the light turns on at 100% brightness for 30, 60, or 90 seconds (selectable via remote).
- After the set time, the light turns off if no further motion is detected.
- Expected runtime: Approximately 1.5 hours on a full charge (total illumination time).
- Režim od soumraku do úsvitu:
- The fixture automatically turns on at 10% rated lumen output at dusk.
- It remains on at 10% brightness throughout the night for approximately 8 hours.
- Světlo se automaticky vypne za úsvitu.
- Expected runtime: Up to 12 hours on a full charge.
- Dusk-to-Dawn + Motion Activated Mode:
- The fixture turns on at 10% brightness at dusk.
- When motion is detected, the light increases to 100% brightness for 30, 60, or 90 seconds (selectable via remote).
- After the set time, the light dims back down to 10% brightness if no further motion is detected.
- Expected runtime: Approximately 11.5 hours on a full charge.
Údržba
To ensure optimal performance and longevity of your HALO SBL10A50GY Solar Powered LED Security Area Light, follow these simple maintenance guidelines:
- Čištění solárních panelů: Pravidelně čistěte povrch solárního panelu měkkým hadříkemamp cloth to remove dust, dirt, leaves, or other debris. A clean solar panel ensures maximum sunlight absorption for efficient battery charging.
- Čištění příslušenství: Periodically wipe down the polycarbonate housing and LED lens with a soft, damp cloth to maintain clarity and light output. Avoid abrasive cleaners.
- Kontrola překážek: Ensure no new obstructions (e.g., growing tree branches, new structures) are blocking direct sunlight from reaching the solar panel.
- Životnost baterie: The integrated Lithium Ion battery has an average life of 90 minutes of continuous operation on a full charge. The fixture requires approximately 8 hours to recharge to 100%. A red indicator light will blink when recharge is needed.
Odstraňování problémů
If your HALO SBL10A50GY Solar Powered LED Security Area Light is not functioning as expected, please refer to the following common issues and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se v noci nerozsvítí. | Nedostatečné solární nabití. | Ensure the solar panel is receiving at least 8 hours of direct, unobstructed sunlight daily. Clean the solar panel if dirty. |
| Light turns off too quickly or does not stay on for the expected duration. | Baterie není plně nabitá nebo je stárnoucí. | Allow for a full day of charging in direct sunlight. If the issue persists after several days of good sunlight, the battery may be nearing the end of its lifespan. |
| Motion sensor is not detecting movement or is too sensitive. | Sensor obstruction or incorrect mode setting. | Ensure the motion sensor lens is clean and unobstructed. Verify the correct operating mode is selected using the remote control. |
| Dálkové ovládání nefunguje. | Dead batteries in remote or remote out of range. | Replace the 2 x AAA batteries in the remote control. Ensure you are within the effective range of the remote. |
| Light does not turn on after initial installation. | Unit not initialized. | Hold the green ON/OFF power button on the fixture for approximately 3 seconds until the light illuminates to initialize the unit. |
Specifikace
Detailed technical specifications for the HALO SBL10A50GY Solar Powered LED Security Area Light:
| Značka | SVATOZÁŘ |
| Název modelu | SBL Outdoor Solar Area Light |
| Číslo modelu | SBL10A50GY |
| Jas | 1000 XNUMX lumenů |
| Teplota barev | 5000 Kelvinů (bílé světlo) |
| Typ světelného zdroje | LED |
| Zdroj napájení | Solární napájení |
| Typ baterie | Lithium Ion (součástí balení) |
| Average Battery Life (Continuous) | 90 minut |
| Doba nabíjení | Approximately 8 hours to 100% |
| Dosah detekce pohybového senzoru | 120° detection range, 25’ distance |
| Kontrolní metoda | Remote Control (RF) |
| Materiál | Polykarbonát |
| Rozměry produktu | 11.48 cm D x 7.07 cm Š x 3.7 cm V |
| Hmotnost položky | 2.01 libry |
| Typ instalace | Držák na stěnu, držák na tyč |
| Úroveň odolnosti proti vodě | Vodě odolný |
Záruka a podpora
The HALO SBL10A50GY Solar Powered LED Security Area Light comes with a 1-year limited warranty. For warranty claims or technical support, please contact Cooper Lighting Solutions, the manufacturer.
For additional information or to explore other HALO products, visit the official HALO Store: Obchod HALO na Amazonu.
