Návod k obsluze pro práškově lakovanou půdní sondu AMS 401.012 7/8" x 33"

1. Úvod

The AMS 401.012 Soil Probe is a robust tool designed for efficient collection of soil samples and assessment of soil moisture and saturation depths. This manual provides essential information for the proper setup, operation, and maintenance of your soil probe to ensure accurate results and prolonged product life.

2. Konec produktuview

Obrázek 1: The AMS 401.012 Soil Probe. It features a dark gray, powder-coated shaft with a black T-handle. A sample window is visible along the lower portion of the shaft, designed for easy sample zotavení.

Klíčové vlastnosti:

• Durable Powder Coated Finish: Provides enhanced resistance to corrosion and wear.
• Integrated Sample Window: Allows for easy visual inspection and removal of soil cores.
• Robustní konstrukce: Engineered to withstand significant downward pressure without bending.
• Vyrobeno v USA: Ensures quality manufacturing standards.

3. Nastavení

The AMS 401.012 Soil Probe is designed for immediate use with its integrated handle. No assembly is typically required for the main probe unit.

1. Rozbalení: Carefully remove the soil probe from its packaging.
2. Inspekce: Before first use, inspect the probe for any signs of shipping damage or manufacturing defects. Ensure the handle is securely attached and the shaft is free of bends or cracks.
3. Seznámení se: Dodržujte sample window and the overall structure of the probe to understand how soil cores will be collected and extracted.

4. Návod k obsluze

The soil probe is primarily used for collecting soil samples for testing and for assessing soil moisture and water saturation depths. Follow these steps for effective operation:

1. Vyberte S.ampling Location: Choose the area where you wish to collect a soil sample or assess moisture levels. For consistent results, select representative areas.
2. Umístění sondy: Place the tip of the soil probe vertically on the ground at the desired location.
3. Aplikujte tlak směrem dolů: Using the T-handle, apply steady downward pressure. You may use your body weight to assist in pushing the probe into the soil. The robust design allows for significant force without bending.
4. Penetrate to Desired Depth: Continue pushing until the probe reaches the desired sampling depth. The 33-inch length allows for deep soil profile analysis without excessive bending.
5. Extrahujte S.ampten: Once the desired depth is reached, twist the probe slightly (approximately a quarter turn) to help sever the soil core at the bottom. Then, pull the probe straight up out of the ground.
6. Observe and Remove Core: The soil core will be visible through the sample window. Use a tool or your fingers to easily slide the soil core out of the probe for inspection or collection.
7. Assess Soil Moisture: Examine the extracted soil core to determine moisture levels at various depths. This is particularly useful for identifying dry spots or assessing irrigation effectiveness.

5. Údržba

Proper maintenance ensures the longevity and performance of your AMS Soil Probe.

• Čištění po každém použití: Immediately after collecting samples, clean any soil residue from the probe, especially from the sample window and the interior of the shaft. Use water and a stiff brush if necessary. This prevents soil buildup and corrosion.
• Sušení: Ensure the probe is thoroughly dried before storage to prevent rust, particularly on any exposed metal surfaces not covered by the powder coating.
• Skladování: Store the soil probe in a dry place, away from extreme temperatures and corrosive chemicals. Hanging it vertically can help prevent accidental bending or damage.
• Pravidelná prohlídka: Regularly inspect the probe for signs of wear, damage, or corrosion. Address any issues promptly to maintain optimal performance.

6. Řešení problémů

Here are common issues and their solutions:

• Difficulty Penetrating Hard Soil:
  • Ensure the soil is adequately moist. Watering the area a few hours before sampling can help.
  • Apply more consistent downward pressure, utilizing full body weight if needed.
  • Avoid areas with known rocks or heavy debris.
• Soil Core Not Remaining in Probe:
  • Ensure a slight twist (quarter turn) is applied before extraction to properly cut the core.
  • If soil is very loose or sandy, it may be difficult to retain a perfect core. Try to extract the probe more quickly.
• Difficulty Removing Soil Core:
  • Ujistěte se, že sample window is clear of debris.
  • Use a small, non-abrasive tool to gently push the core out if it's stuck.

7. Specifikace

8. Záruka a podpora

For specific warranty information and customer support, please refer to the documentation included with your purchase or contact AMS Inc. directly. Contact details can typically be found on the manufacturer's official webmísto nebo obal produktu.