AQQA Aquarium Light Model GCA-AQ052 Instruction Manual

1. Konec produktuview

The AQQA Aquarium Light Model GCA-AQ052 is a full-spectrum LED lighting solution designed for aquariums ranging from 17 to 24 inches. It features 14 adjustable colors, 5 brightness levels, and an integrated timer for automated operation. The light is constructed with a durable aluminum alloy and boasts an IP67 waterproof rating, ensuring longevity and safety in aquatic environments.

Image 1.1: The AQQA Aquarium Light providing illumination to a planted aquarium.

2. Obsah balení

Zkontrolujte prosím, zda jsou v balení přítomny všechny komponenty:

• AQQA Aquarium Light Unit (Model GCA-AQ052)
• Extendable Mounting Brackets (2x)
• Power Adapter with Controller
• Návod k použití (tento dokument)

3. Pokyny k nastavení

3.1 Montáž světla

1. Opatrně vybalte všechny součásti z krabice.
2. Attach the extendable mounting brackets to each end of the light unit. Ensure they are securely fastened.
3. Place the light unit on top of your aquarium. Adjust the extendable brackets to fit the width of your tank (suitable for 17-24 inch tanks).
4. Ensure the light is stable and centered over the aquarium for even illumination.

Image 3.1: The extendable brackets allow for flexible installation on various tank sizes.

3.2 Připojení napájení

1. Connect the power adapter cable to the light unit.
2. Zapojte napájecí adaptér do standardní elektrické zásuvky.
3. Ensure the power cord is routed safely and away from water to prevent accidental splashes.

4. Návod k obsluze

The AQQA Aquarium Light is controlled via an inline remote with several buttons for various functions.

Image 4.1: The inline remote control for managing light settings.

4.1 Zapnutí/vypnutí

• Stiskněte tlačítko Tlačítko napájení () to turn the light on or off.

4.2 Úprava barev

• Stiskněte tlačítko Tlačítko pro změnu barvy () to cycle through 14 different color modes.
• Pro aktivaci Auto Color Change Mode, stiskněte a podržte Tlačítko pro změnu barvy for approximately 3 seconds. The light will automatically transition between colors.

4.3 Nastavení jasu

• Použijte Zvýšení jasu (+) a Snížení jasu (-) buttons to adjust the light intensity.
• There are 5 adjustable brightness levels, ranging from 10% to 100%.

Image 4.2: Visual representation of the 5-level brightness adjustment.

4.4 Funkce časovače

The built-in timer allows for automated lighting cycles.

• Stiskněte tlačítko Tlačítko časovače () to select a duration: 3 hours (3H), 6 hours (6H)nebo 12 hours (12H).
• Once a timer is set, the light will automatically turn off after the selected duration and will turn on at the same time the next day, repeating the cycle.
• Napřample, if you activate the 12H timer at 8:00 AM, the light will turn off at 8:00 PM and automatically turn on again at 8:00 AM the following day.

Image 4.3: Timer settings for 3, 6, or 12 hours of operation.

5. Údržba

5.1 Čištění

• Before cleaning, always unplug the light from the power outlet.
• Otřete světelnou jednotku měkkým hadříkemamp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or waterproof sealing.
• Před opětovným připojením k napájení se ujistěte, že je světlo zcela suché.

5.2 Waterproofing Information

• The AQQA Aquarium Light has an IP67 waterproof rating, meaning it is protected against dust and temporary immersion in water (up to 1 meter for 30 minutes).
• Důležité: This light is designed for placement over the aquarium and is ne intended for submersible use. Do not immerse the light unit directly into the water.

6. Řešení problémů

If you encounter issues with your AQQA Aquarium Light, please refer to the following common solutions:

• Světlo se nerozsvítí:
  • Zkontrolujte, zda je napájecí adaptér bezpečně zapojený do svítidla i do elektrické zásuvky.
  • Ověřte funkčnost elektrické zásuvky zapojením jiného zařízení.
  • Ensure the power button on the inline remote is pressed.
• Colors or Brightness Not Changing:
  • Ensure the remote control buttons are being pressed firmly.
  • If the light is stuck on a specific color or brightness, try unplugging the unit for 30 seconds and then plugging it back in to reset.
• Funkce časovače nefunguje:
  • Confirm that a timer duration (3H, 6H, or 12H) has been selected by pressing the timer button. The corresponding indicator light on the remote should be illuminated.
  • The timer cycle begins from the moment it is set. If you unplug the light, the timer will reset.
• Light Flickering or Malfunctioning:
  • Okamžitě odpojte napájení.
  • Inspect the power cord and light unit for any visible damage.
  • Pokud problémy přetrvávají, kontaktujte zákaznickou podporu.

7. Specifikace

Image 7.1: Detailed specifications for different AQQA aquarium light models, including the GCA-AQ052.

8. Informace o záruce

The AQQA Aquarium Light Model GCA-AQ052 comes with a manufacturer warranty for 1 rok od data nákupuUschovejte si prosím doklad o koupi pro případ reklamace.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, unauthorized repair, or failure to follow the instructions in this manual.

9. Zákaznická podpora

For further assistance, technical support, or warranty inquiries, please contact AQQA customer service through the retailer where the product was purchased or visit the official AQQA brand store online.

Zavázali jsme se poskytovat našim zákazníkům kvalitní produkty a podporu.