X-PRO 150cc Moped Street Gas Moped Instruction Manual

1. Úvod

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your X-PRO 150cc Moped Street Gas Moped, Model Fiji 150. Please read this manual thoroughly before assembly and operation to ensure proper use and to prevent damage or injury.

Figure 1: X-PRO 150cc Moped Street Gas Moped (Blue model shown).

2. Nastavení a montáž

Your X-PRO Fiji 150 Moped requires some assembly upon arrival. Follow these steps carefully. Refer to the assembly video for visual guidance.

2.1 Unboxing and Frame Removal

The moped is shipped securely within a metal frame and cardboard box. Carefully remove the outer packaging.

Figure 2: Moped secured within its metal shipping frame.

Use appropriate tools to carefully unbolt and remove the metal frame surrounding the moped. Ensure the moped is stable before proceeding.

2.2 Instalace řídítek

The handlebar assembly needs to be attached to the steering column. Ensure all cables and wires are routed correctly and not pinched.

2.3 Front Wheel and Fender Assembly

Install the front wheel, ensuring the brake caliper aligns correctly with the disc. Attach the front fender securely.

2.4 Připojení baterie

Locate the battery compartment, typically under the floorboard. Connect the positive (red) and negative (black) terminals to the battery. Ensure connections are tight and secure.

2.5 Mirror Installation

Nainstalujte zadní částview mirrors into their designated mounting points on the handlebar. Adjust for optimal visibility.

2.6 Rear Rack Installation

Attach the rear rack to the designated mounting points at the rear of the moped. Ensure all bolts are tightened securely.

2.7 Videonávod k montáži

For a comprehensive visual guide on the assembly process, please watch the official X-PRO Fiji 150 Scooter Assembly Video:

3. Návod k obsluze

Familiarize yourself with the moped's controls before riding. Always wear appropriate safety gear, including a helmet.

3.1 Kontroly před jízdou

• pneumatiky: Zkontrolujte tlak a stav pneumatik.
• brzdy: Zkontrolujte správnou funkci přední a zadní brzdy.
• Světla: Verify headlights, taillights, and turn signals are working.
• Palivo: Ensure sufficient fuel level. Use recommended fuel type.
• Olej: Zkontrolujte hladinu motorového oleje.

3.2 Starting the Moped

1. Vložte klíč do zapalování a otočte jím do polohy „ON“.
2. Ensure the kill switch is in the 'RUN' position.
3. Apply the brake lever (either front or rear).
4. Press the electric start button. If the engine does not start, try using the kick-start lever.

3.3 Riding the Moped

Once the engine is running, slowly twist the throttle grip to accelerate. Release the throttle to decelerate. Use the brake levers to stop. Practice in a safe, open area before riding in traffic.

4. Údržba

Regular maintenance is crucial for the longevity and safe operation of your moped.

4.1 Pravidelné kontroly

• Výměna oleje: Change engine oil every 500-1000 miles or as recommended in the full owner's manual.
• Tlak v pneumatikách: Check weekly. Refer to the tire sidewall for recommended pressure.
• Brzdová kapalina: Check fluid level monthly. Top up if necessary with recommended fluid.
• Chain/Belt: Inspect for proper tension and lubrication (if applicable).
• Zapalovací svíčka: Inspect and clean or replace as needed.

4.2 Čištění a skladování

Clean your moped regularly with mild soap and water. Avoid high-pressure washers on electrical components. When storing for extended periods, ensure the fuel tank is full (to prevent condensation) and the battery is disconnected or on a trickle charger.

5. Řešení problémů

This section addresses common issues you might encounter with your moped.

5.1 Engine Won't Start

• Bez paliva: Zkontrolujte hladinu paliva.
• Zabiják: Ensure it's in the 'RUN' position.
• Baterie: Zkontrolujte připojení baterie a úroveň nabití.
• Zapalovací svíčka: Inspect for fouling or damage.

5.2 Poor Performance

• Low Tire Pressure: Inflate tires to recommended levels.
• Zanesený vzduchový filtr: Vyčistěte nebo vyměňte vzduchový filtr.
• Problémy s karburátorem: May require professional adjustment or cleaning.

6. Specifikace

7. Záruka a podpora

For warranty information, please refer to the documentation provided at the time of purchase. X-PRO is committed to customer satisfaction and offers support for parts and technical assistance.

If you require assistance or have questions not covered in this manual, please contact the seller or manufacturer directly through the contact information provided with your purchase or on the official X-PRO webmísto.