Zavedení
This manual provides essential information for the installation, operation, and maintenance of your Franke Sirius 2.0 S2D 611-78 Tectonite Inset Sink. Please read these instructions carefully before installation and retain them for future reference. Proper installation and care will ensure the longevity and optimal performance of your sink.
Figure 1: Franke Sirius 2.0 S2D 611-78 Tectonite Inset Sink. This image displays the overall design of the sink, featuring a large main bowl and a smaller drainer area, all in a uniform grey Tectonite finish.
Bezpečnostní pokyny
- Během instalace vždy používejte vhodné osobní ochranné prostředky (OOP), jako jsou rukavice a ochranné brýle.
- Ensure all water and electrical supplies are turned off before beginning installation.
- Handle the sink with care to avoid damage or injury, as it can be heavy and has sharp edges.
- Pokud si nejste jisti některou částí instalačního procesu, poraďte se s kvalifikovaným odborníkem.
Nastavení a instalace
The Franke Sirius 2.0 S2D 611-78 is designed for inset installation. Follow these steps for proper setup:
- Připravte pracovní desku: Ensure the worktop is clean, dry, and level. Mark the cutout area according to the provided template (not included in this manual, refer to packaging).
- Vystřihněte otvor: Carefully cut the opening in the worktop using appropriate tools. Ensure the edges are smooth and free of debris.
- Naneste tmel: Apply a bead of silicone sealant around the edge of the cutout opening to create a watertight seal.
- Umístění dřezu: Carefully lower the sink into the cutout opening, ensuring it is properly aligned. Press down firmly to engage the sealant.
- Zajistěte dřez: Use the provided fixing clips (if applicable) to secure the sink to the underside of the worktop. Tighten the clips evenly to ensure a snug fit.
- Připojení instalatérství: Install the waste kit and connect the plumbing according to local regulations. Ensure all connections are watertight.
- Nainstalujte faucet: Mount the faucet onto the sink or worktop (if pre-drilled) and connect the water supply lines.
- Zkouška těsnosti: Turn on the water supply and check all connections for leaks. Rectify any leaks immediately.
Figure 2: Dimensional drawing of the Franke Sirius 2.0 S2D 611-78 Tectonite Inset Sink. This diagram illustrates key measurements in millimeters, including the overall length (780mm), width (500mm), bowl dimensions (e.g., 440mm width, 432mm length), and corner radii (R8, R10). The diagonal measurement of the bowl is 607mm.
Návod k obsluze
The Franke Sirius 2.0 S2D 611-78 Tectonite sink is designed for everyday kitchen use. Its operation is straightforward:
- Průtok vody: Use the installed faucet to control water flow and temperature.
- Likvidace odpadu: Ensure the waste plug is correctly positioned to retain water or allow drainage.
- Drainer Area: Utilize the integrated drainer area for drying dishes or preparing food.
Údržba a péče
To maintain the appearance and performance of your Tectonite sink, follow these care guidelines:
- Denní úklid: Clean the sink regularly with warm soapy water and a soft cloth or sponge. Rinse thoroughly and dry to prevent water spots.
- Odolné skvrny: For more stubborn stains, use a non-abrasive cream cleaner specifically designed for composite sinks. Apply with a soft cloth, rub gently, then rinse and dry.
- Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners, steel wool, scouring pads, or strong chemical agents (e.g., drain cleaners, paint removers, oven cleaners) as these can damage the Tectonite surface.
- Tepelná odolnost: While Tectonite is highly heat resistant, avoid placing extremely hot pans directly onto the surface. Always use a trivet or heat protection mat.
- Zabraňte poškrábání: Although Tectonite is durable, avoid dragging heavy or sharp objects across the surface to prevent scratches.
Odstraňování problémů
Běžné problémy a jejich řešení naleznete v následující tabulce:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Water spots/Limescale | Hard water deposits | Clean regularly with a mild descaling agent or vinegar solution, then rinse thoroughly. |
| Dull surface appearance | Residue buildup or lack of regular cleaning | Perform a thorough cleaning with a recommended composite sink cleaner. |
| Pomalé odvodnění | Partial blockage in waste pipe | Clear the waste trap. Avoid using harsh chemical drain cleaners. |
| Netěsnosti kolem spojů | Loose fittings or worn seals | Check and tighten all plumbing connections. Replace seals if necessary. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | FRANKE |
| Model | Sirius 2.0 S2D 611-78 |
| Materiál | Tectonite® |
| Barva | Šedá |
| Velikost | X-velký |
| Styl | Moderní |
| Způsob instalace | Vložka |
| Tvar | Obdélníkový |
| ASIN | B0C1KRYQ78 |
Záruka a podpora
For information regarding the product warranty, please refer to the documentation provided with your purchase or visit the official Franke webwebu. Pro technickou podporu nebo další pomoc kontaktujte zákaznický servis Franke prostřednictvím jejich oficiálních kanálů.
