SOMMER YS12870

Sommer YS12870 922MHz Telecody klávesnice Courier černá Návod k obsluze

Model: YS12870

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Sommer YS12870 922MHz Telecody Keypad Courier Black. This device is designed to provide secure access to your garage and includes specialized functions for in-garage parcel delivery, enhancing convenience and security for package reception.

Před použitím produktu si prosím pečlivě přečtěte tento návod, abyste zajistili jeho správný provoz a předešli poškození.

2. Bezpečnostní pokyny

  • Always follow local safety regulations and guidelines during installation and operation.
  • Keep the keypad and its components out of reach of children.
  • Do not attempt to modify or repair the device yourself. Refer all servicing to qualified personnel.
  • Ensure the keypad is installed in a location that is protected from extreme weather conditions and direct water exposure.
  • Use only the specified battery type (1 x 9V battery) for replacement.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • Sommer YS12870 Telecody Keypad Courier Black
  • 1 x 9V Battery (pre-installed or included separately)
  • Montážní materiál (šrouby, kotvy)
  • Návod k použití (tento dokument)

4. Nastavení

4.1. Instalace baterie

The keypad requires one 9V battery for operation. The battery may be pre-installed or included separately.

  1. Locate the battery compartment cover on the back of the keypad.
  2. Remove the cover by sliding it or unscrewing it, depending on the design.
  3. Vložte 9V baterii a dbejte na správnou polaritu (+/-).
  4. Bezpečně nasaďte kryt prostoru pro baterie.
Sommer YS12870 Telecody Keypad Courier Black

Přední view of the Sommer YS12870 Telecody Keypad Courier Black. The keypad features a numeric layout from 0-9, along with 'ESC', 'P', 'M' buttons, and two circular buttons. The 'SOMMER' logo is visible at the bottom. The device has a black body with silver-colored side panels.

4.2. Montáž klávesnice

Choose a suitable location for mounting the keypad, typically near your garage door, at a convenient height for all users. Ensure the surface is flat and stable.

  1. Mark the desired mounting holes on the wall using the keypad as a template.
  2. Drill pilot holes at the marked locations. If mounting into drywall or masonry, insert appropriate wall anchors.
  3. Secure the keypad to the wall using the provided screws. Do not overtighten.

4.3. Programming with Your Garage Door Opener

The Telecody Keypad must be programmed to communicate with your Sommer garage door opener. Refer to your garage door opener's manual for specific programming instructions, as steps may vary slightly by model. Generally, the process involves:

  1. Locate the programming button on your garage door opener motor unit (often labeled 'Learn' or 'Program').
  2. Press and release the programming button. An indicator light on the opener will typically illuminate.
  3. Within a specified timeframe (usually 30 seconds), enter your desired access code on the Telecody Keypad and press the 'P' (Program) button.
  4. The opener's indicator light should flash or change color, confirming successful programming.
  5. Test the access code by entering it and pressing 'P'. The garage door should activate.

5. Návod k obsluze

5.1. Standard Garage Door Operation

To open or close your garage door using a programmed access code:

  1. Enter your personal 4-digit to 6-digit access code on the keypad.
  2. Press the 'P' button.
  3. The garage door will activate (open or close).

5.2. In-Garage Parcel Delivery Functions

The Telecody Courier Black includes specific functions to facilitate secure in-garage parcel delivery. These functions allow a delivery driver to open the garage door once, place a package inside, and then the door automatically closes.

To activate the parcel delivery mode:

  1. Enter the designated parcel delivery access code (this code is programmed separately from your personal access code, typically during initial setup or through your opener's advanced settings).
  2. Press the 'M' button (for 'Mode' or 'Courier').
  3. The garage door will open. After a preset time (e.g., 30 seconds) or after the door sensors detect an object has passed, the door will automatically close. This ensures the garage is not left open indefinitely.

Poznámka: The exact behavior and programming of the parcel delivery function may depend on your specific Sommer garage door opener model. Consult your opener's manual for detailed instructions on setting up and managing courier access codes and auto-close timers.

6. Údržba

6.1. Výměna baterie

When the keypad's battery is low, the indicator light may flash or the keypad may become unresponsive. Replace the battery as soon as possible to ensure continuous operation.

  1. Follow the steps in Section 4.1 to access the battery compartment.
  2. Vyjměte starou 9V baterii.
  3. Insert a new 9V battery, observing correct polarity.
  4. Bezpečně zavřete přihrádku na baterie.

Důležité: Staré baterie zlikvidujte zodpovědně v souladu s místními předpisy.

6.2. Čištění

Clean the keypad periodically to remove dirt and grime that may affect button functionality or visibility.

  • Použijte měkký, damp cloth to wipe the surface of the keypad.
  • Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the electronics.
  • Ensure the keypad is dry before use.

7. Řešení problémů

Běžné problémy a jejich řešení naleznete v tabulce níže.

ProblémMožná příčinaŘešení
Klávesnice nereaguje.Vybitá nebo slabá baterie.Replace the 9V battery (see Section 6.1).
Garage door does not open/close.Incorrect access code entered.Re-enter the correct access code.
Klávesnice není naprogramována pro otevírání.Reprogram the keypad to your garage door opener (see Section 4.3).
Opener is out of range or signal interference.Ensure keypad is within operational range of the opener. Check for sources of interference.
Parcel delivery function not working.Incorrect courier code or mode not activated.Verify the courier access code and ensure the 'M' button is pressed after the code. Consult your opener's manual for courier function setup.

If the problem persists after attempting these solutions, contact Sommer customer support.

8. Specifikace

FunkceDetail
Číslo modeluYS12870
Frekvence922.5 MHz
Zdroj napájení1 x 9V baterie (součástí balení)
Rozměry produktu1 x 1 x 1 palce (přibližně)
BarvaČerný
KompatibilitaSommer garage door openers operating on 922.5 MHz

9. Záruka a podpora

9.1. Informace o záruce

Sommer products are manufactured to high-quality standards. For specific warranty details regarding your YS12870 Telecody Keypad, please refer to the warranty card included with your purchase or visit the official Sommer webUschovejte si doklad o koupi pro případ reklamace.

9.2. Zákaznická podpora

If you require assistance with installation, programming, or troubleshooting that is not covered in this manual, please contact Sommer customer support. Contact information can typically be found on the Sommer webmístě nebo na obalu produktu.

Online zdroje: Visit the official Sommer website for FAQs, additional manuals, and support contact details.

Související dokumenty - YS12870

Předview Uživatelská příručka pro bezdrátovou klávesnici SOMMER Telecody+/Courier
Uživatelská příručka pro bezdrátovou klávesnici SOMMER Telecody+/Courier s podrobnými technickými specifikacemi, bezpečnostními pokyny, obsluhou, programováním a výměnou baterií.
Předview Rychlý start: Průvodce programováním klávesnice Sommer Telecody k otvírači CarTeck Drive 600
Stručný návod k programování klávesnice Sommer Telecody pro pohon garážových vrat CarTeck Drive 600, včetně podrobných pokynů pro nastavení jedněch i více vrat.
Předview Instalační a provozní návod k bezdrátové klávesnici Sommer Telecody
Komplexní průvodce instalací, programováním a obsluhou bezdrátové klávesnice Sommer Telecody pro otvírače garážových vrat. Zahrnuje funkce, řešení problémů a bezpečnostní pokyny.
Předview Stručný průvodce Sommer Digicode Telecody
Stručný návod k obsluze zařízení Sommer Digicode Telecody, který zahrnuje aktivaci, programování a resetování zařízení.
Předview Návod k instalaci sady lepících objímek SOMMER (model S10990-00001)
Oficiální instalační návod pro sadu lepících zásuvek SOMMER (model S10990-00001). Poskytuje podrobné pokyny pro bezpečnou a snadnou instalaci tohoto příslušenství pro garážová vrata.
Předview Manuál k pohonu bran SOMMER twist 200 E
Komplexní návod k instalaci, provozu a údržbě systému otvírání bran SOMMER twist 200 E, který obsahuje podrobné pokyny a bezpečnostní informace.