Návod k obsluze pro výrobník ledu Silonn SLIM12T

Zavedení

This manual provides detailed instructions for the safe and efficient operation and maintenance of your Silonn Commercial Ice Maker, Model SLIM12T. Please read all instructions carefully before installation and use, and retain this manual for future reference.

Image: The Silonn Commercial Ice Maker SLIM12T, showing its stainless steel exterior, control panel, and included accessories like an ice scoop and water connection hoses.

Co je v krabici

Po vybalení zkontrolujte, zda jsou přítomny všechny níže uvedené položky:

• Profesionální výrobník ledu
• Naběračka ledu
• Vodní filtr
• Hadice pro přívod vody
• Water Outlet Hose (Drain Hose)
• Manuál

Image: A visual representation of the Silonn Commercial Ice Maker with its dimensions and a clear display of the included accessories: ice scoop, drain hose, water quick connector, and water hose.

Nastavení a instalace

Proper installation is crucial for optimal performance and longevity of your ice maker. Ensure the unit is placed on a stable, level surface with adequate ventilation.

1. Umístění

• Position the ice maker in a location that allows for proper air circulation around the unit.
• Vyhněte se přímému slunečnímu záření nebo blízkosti zdrojů tepla.
• Ensure the unit is level to facilitate proper water drainage and ice production.

2. Připojení vody

Connect the water inlet hose to a potable water supply. It is recommended to use the included water filter for improved ice quality and machine longevity.

1. Locate the water intake port at the rear of the unit.
2. Connect one end of the water inlet hose to the water intake port.
3. Connect the other end of the water inlet hose to your water supply. Ensure all connections are secure to prevent leaks.

3. Připojení odvodnění

The ice maker requires a drainage system to remove melted ice water and water from the self-cleaning cycle.

1. Locate the water outlet (drain) port at the rear of the unit.
2. Connect the drain hose to the water outlet port.
3. Route the drain hose to a suitable drain, ensuring it has a continuous downward slope to allow for gravity drainage. Avoid kinks or obstructions in the hose.

Image: The back panel of the ice maker, illustrating the tap water inlet hose, power cord, and water drain hose connections. Detailed steps for connecting the hoses are also shown.

4. Připojení napájení

Zapojte napájecí kabel do uzemněné elektrické zásuvky. Ujistěte se, že hlasitosttage odpovídá specifikacím výrobníku ledu.

Návod k obsluze

Your Silonn ice maker features an intuitive control panel for easy operation.

Image: A close-up of the Silonn ice maker's LCD control panel, detailing the functions of the LIGHT, TIMER, CLEAN, ON/OFF, and +/- buttons.

1. Zapnutí/vypnutí

• Stiskněte tlačítko ON/OFF tlačítko pro zapnutí nebo vypnutí jednotky.

2. Ice Production

• Once powered on and water is connected, the machine will automatically begin the ice-making cycle.
• The ice maker produces approximately 66 ice cubes per cycle, with a cycle duration of 8-15 minutes.
• The unit can produce up to 150 lbs of ice in 24 hours and has a storage capacity of 33 lbs.

Image: An infographic highlighting the Silonn ice maker's capacity to produce over 7000 standard clear ice cubes (0.9 x 0.9 x 0.9 inch) per day, equivalent to over 800 drinks.

3. Úprava tloušťky ledu

The thickness of the ice cubes can be adjusted using the control panel.

• Použijte +/- buttons to adjust the ice-making process time, which influences ice thickness.
• Longer cycles result in thicker ice, while shorter cycles produce thinner ice.
• Options typically include Thin (approx. 1 min), Medium (approx. 15 min), or Thick (approx. 20 min).

Image: A visual guide demonstrating the adjustable ice thickness settings (Thin, Medium, Thick) and their corresponding approximate production times.

4. Funkce časovače

Set a timer for the ice maker to automatically turn on or off.

• Rychle stiskněte ČASOVAČ pro vstup do nastavení času rezervace.
• Použijte +/- tlačítky nastavte požadovaný čas zapnutí nebo vypnutí jednotky.

Image: The ice maker's control panel displaying the timer function, allowing users to set when the unit should turn on or off.

5. Blue Light

• Stiskněte tlačítko SVĚTLO button to turn on the internal blue light, illuminating the ice storage area.

6. Vodní nedostatektage Alarm

• An alarm will sound when the water level is low, indicating a need for refill.

Údržba

Regular maintenance ensures the efficiency and hygiene of your ice maker.

1. Funkce samočištění

The ice maker is equipped with an automatic self-cleaning function.

• Podržte ON/OFF button for 5 seconds to initiate the self-cleaning cycle.
• This function helps maintain the internal cleanliness of the unit.

2. Generální úklid

• Pravidelně otírejte vnější povrch měkkým hadříkemamp tkanina.
• Clean the ice storage bin and ice scoop with mild soap and water. Rinse thoroughly.
• Ensure the water filter is replaced periodically as recommended by the manufacturer to maintain water quality.

Odstraňování problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat. V případě problémů, které zde nejsou uvedeny, se obraťte na zákaznickou podporu.

Specifikace

Oficiální video produktu

Toto video poskytuje vizuální ukázkuview of the Silonn Commercial Ice Maker's features and operation.

Zákaznická podpora

For any questions regarding initial setup, operation, maintenance, or product assistance, please contact the Silonn U.S.-based customer care team. Refer to the product packaging or the Silonn webstránky pro kontaktní informace.