Uživatelská příručka k LANCOM R&S Unified Firewall UF-60 LTE

1. Úvod

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. Bezpečnostní informace

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• Ujistěte se, že je zařízení umístěno na stabilním a rovném povrchu.
• Nevystavujte zařízení vlhkosti, extrémním teplotám ani přímému slunečnímu záření.
• Používejte pouze napájecí adaptér dodaný se zařízením.
• Neotevírejte zařízení casing. Veškerý servis svěřte kvalifikovanému personálu.
• Udržujte větrací otvory volné, aby nedošlo k přehřátí.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• LANCOM R&S Unified Firewall UF-60 LTE device
• Napájecí adaptér
• Two LTE Antennas
• Ethernetový kabel
• Rychlý průvodce

4. Zařízení skončiloview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1. Front Panel Indicators

• ETH0-ETH3 LEDs: Indicate activity and link status for the respective Ethernet ports.
• LTE LED: Shows the status of the LTE connection (e.g., signal strength, connection active).
• LED stavu systému: Indicates the overall operational status of the device.

4.2. Rear Panel Ports (Typical Configuration)

• Příkon: Připojuje se k dodanému napájecímu adaptéru.
• Ethernet Ports (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• LTE Antenna Connectors: For attaching the external LTE antennas.
• Slot pro SIM kartu: For inserting a SIM card for LTE connectivity.
• Resetovací tlačítko: Používá se k obnovení továrního nastavení.

5. Nastavení

5.1. Instalace hardwaru

1. Připojit antény: Screw the two LTE antennas onto the connectors at the rear of the device.
2. Vložte SIM kartu: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. Připojte síťové kabely:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. Připojte napájení: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2. Přístup k počáteční konfiguraci

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. Otevřete a web prohlížeč a zadejte výchozí IP adresu (např. http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. Obsluha zařízení

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1. Přístup k rozhraní pro správu

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. Otevřete a web browser and navigate to the device's IP address or hostname.
3. Enter your administrator username and password.

6.2. Key Features and Configuration Areas

• Konfigurace sítě: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• Pravidla brány firewall: Define security policies, access control lists, and intrusion prevention.
• VPN: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• Nastavení systému: Manage user accounts, firmware updates, backups, and logging.

7. Údržba

7.1. Aktualizace firmwaru

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. Čištění

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. Configuration Backup

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat.

• Bez napájení:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• No Internet Connection (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• Nelze přistupovat k rozhraní pro správu:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. Technické specifikace

Note: Specifications are subject to change without notice. For the most current information, please refer to the manufacturer's official website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. Záruka a podpora

10.1. Informace o záruce

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems webstránky pro podrobné informace.

10.2. Technická podpora

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

Výrobce Webmísto: www.lancom-systems.com