WORKPRO Storage Cabinet Instruction Manual

Zavedení

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your WORKPRO Metal Storage Cabinet. Designed for durability and versatility, this tall locking steel cabinet is suitable for organizing tools, office supplies, home items, and various shop essentials. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

Figure 1: WORKPRO Storage Cabinet with doors open, displaying its spacious interior and included keys.

Důležité bezpečnostní informace

Dodržování těchto bezpečnostních pokynů je zásadní pro prevenci zranění a poškození produktu.

• Always assemble this product on a stable, level surface.
• Use appropriate safety gear when lifting and moving the cabinet.
• Udržujte skříňku mimo dosah zdrojů tepla.
• Do not overload the shelves. Each shelf can hold up to 180 lbs (evenly distributed). The total load capacity is 900 lbs.
• Always use both hands when opening and closing the cabinet doors to prevent pinching.
• Nechávejte skříň uzamčenou, když ji nepoužíváte, abyste zabránili neoprávněnému přístupu.
• Vždy dodržujte pokyny výrobce pro správné použití a údržbu.

Seznam dílů

Před zahájením montáže se ujistěte, že jsou všechny díly přítomny a nepoškozené. Identifikaci naleznete na níže uvedeném obrázku.

Obrázek 2: Rozložené view of the WORKPRO Storage Cabinet components.

Nastavení a montáž

Assembly requires at least two people due to the weight and size of the components. An electric drill or PH2 Phillips screwdriver is recommended.

1. Připravte si základ: Lay the bottom panel on a flat, protected surface. Attach the corner brackets and adjustable feet to the bottom panel using the provided screws. Ensure the feet are tightened clockwise to elevate and counter-clockwise to lower for leveling.
2. Assemble Back and Side Panels: Align and attach the two back panels together. Then, attach the left and right side panels to the assembled back panels at right angles, securing them with screws at the indicated locations.
3. Attach Top Bracket: Secure the top bracket to the side panels using screws. This provides structural integrity to the top frame.
4. Připevněte horní panel: Carefully place the top panel onto the assembled frame and secure it with screws.
5. Instalace polic: Insert the metal clips into the perforated slots on the side panels at your desired height for each shelf. Place the shelves onto these clips. You can adjust the shelf height as needed. For added stability, plastic clips can be inserted at the corners of the shelves to lock them in place.
6. Připevnit dveře: Install the bottom hinge pin and washer on each side of the bottom bracket. Lower the left door onto the bottom left hinge pin, then swing the left door into the top bracket while pulling down on the latch. Align the latch with the hole in the top bracket and release when the latch is in position. Repeat for the right door.

Assembly Video Guides:

Návod k obsluze

Seřizovací police

The cabinet features adjustable shelves to accommodate items of various sizes. To adjust a shelf:

1. Empty the shelf you wish to move.
2. Remove the shelf by lifting it off its support clips.
3. Relocate the metal support clips to the desired height in the perforated slots on the side panels.
4. Place the shelf back onto the clips, ensuring it is level and secure. For enhanced stability, insert the provided plastic locking clips at the corners of the shelf.

Figure 3: Adjustable shelves allow for customized storage configurations. Each shelf supports up to 180 lbs.

Uzamykací mechanismus

The cabinet is equipped with an enhanced locking system for security. Four keys are provided.

• To lock: Close both doors firmly. Insert a key into the lock cylinder and turn clockwise until the mechanism engages.
• To unlock: Insert a key into the lock cylinder and turn counter-clockwise. The doors should then open freely.

Figure 4: The enhanced locking system ensures the security of your stored items.

Údržba

Regular maintenance will prolong the life of your WORKPRO Storage Cabinet.

• Čištění: Otřete povrch skříně měkkým hadříkemamp hadříkem a jemným čisticím prostředkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Inspekce: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Vyrovnání: Re-adjust the leveling feet if the cabinet becomes unstable or uneven over time.
• Prevence proti korozi: The cabinet is made of SPCC cold rolled steel with a powder coating for rust resistance. However, avoid prolonged exposure to excessive moisture or harsh chemicals to maintain its integrity.

Odstraňování problémů

Specifikace produktu

Figure 5: The cabinet's construction features durable SPCC cold rolled steel with a protective powder coating.

Záruka a podpora

For any parts that are damaged or missing, or for further assistance, please feel free to contact the WORKPRO service team. They are committed to resolving your problem within 24 hours.

Oficiální uživatelská příručka (PDF) je také k dispozici ke stažení: Stáhněte si uživatelskou příručku