Zavedení
This manual provides comprehensive instructions for the safe and efficient use of your Silonn Ice Maker and Brita Water Filter Dispenser Bundle. Please read all instructions carefully before operating the appliances and retain this manual for future reference.
Image: The Silonn Ice Maker and Brita Water Filter Dispenser, shown together as a bundle.
Bezpečnostní informace
Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.
- Ujistěte se, že napájecí zdroj odpovídá objtage požadavky spotřebiče.
- Do not immerse the ice maker in water or other liquids.
- Během provozu se do výrobníku ledu nedostanou ruce ani cizí předměty.
- Place the ice maker on a stable, level surface away from direct sunlight and heat sources.
- Only use potable water in both the ice maker and water dispenser.
- Keep the Brita dispenser away from extreme temperatures.
Nastavení
Silonn Ice Maker Setup
- Rozbalení: Carefully remove the ice maker from its packaging. Inspect for any damage.
- Umístění: Position the ice maker on a flat, stable countertop. Ensure adequate ventilation around the unit.
- Počáteční čištění: Before first use, it is recommended to run the self-cleaning cycle. Refer to the 'Maintenance' section for detailed instructions.
- Náplň vodou: Open the water reservoir lid and fill with potable water up to the maximum fill line. Do not overfill.
- Připojení napájení: Zapojte napájecí kabel do uzemněné elektrické zásuvky.
Image: The Silonn countertop ice maker, ready for setup.
Brita Water Filter Dispenser Setup
- Mytí: Wash the dispenser, lid, and reservoir by hand with mild soap and rinse thoroughly. Do not wash the filter.
- Příprava filtru: The Brita Standard Filter does not require pre-soaking.
- Filter Insertion: Insert the filter firmly into the reservoir until it clicks into place.
- Plnicí: Fill the reservoir with cold tap water. The water will filter through to the main body of the dispenser.
Image: The Brita XL Water Filter Dispenser with a filter, ready for assembly.
Návod k obsluze
Silonn Ice Maker Operation
- Zapnutí: Press the 'ON/OFF' button on the control panel.
- Vyberte velikost ledu: Use the 'SELECT' button to choose between small or large bullet-shaped ice cubes. The indicator light will show your selection.
- Výroba ledu: The ice maker will begin producing ice. The first batch of 9 cubes is typically ready in approximately 6 minutes.
- Sběr ledu: Ice will drop into the ice basket. When the basket is full, the 'ICE FULL' indicator will illuminate, and the machine will pause production.
- Náplň vody: If the water level is low, the 'ADD WATER' indicator will light up. Refill the reservoir to continue ice production.
- Vypnout: Press the 'ON/OFF' button to turn off the ice maker.
Obrázek: Detail view of the Silonn ice maker's internal components showing ice being formed, with text indicating 6 minutes for 9 pieces of ice.
Brita Water Filter Dispenser Operation
- Výdej vody: Use the easy-pour spigot located at the bottom of the dispenser to get filtered water.
- Doplňování: When the water level is low, simply lift the lid and pour cold tap water into the reservoir.
- Indikátor filtru: The dispenser features a filter indicator to remind you when it's time to change the Brita water filter.
Image: Diagram illustrating the Brita dispenser's 27-cup capacity, with 9 cups in the reservoir and 18 cups in the body.
Údržba
Silonn Ice Maker Maintenance
- Funkce samočištění: To activate, ensure the water reservoir is filled. Press and hold the 'CLEAN' button (if available, or refer to specific model instructions for self-cleaning). The machine will run a cleaning cycle.
- Vypouštění vody: Regularly drain any remaining water from the reservoir using the drain plug located at the bottom of the unit.
- Čištění exteriéru: Vnější povrch otřete měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky.
- Koš na led a naběračka: Wash the ice basket and scoop with mild soap and water, then rinse and dry thoroughly.
Brita Water Filter Dispenser Maintenance
- Čištění: Hand wash the dispenser, lid, and reservoir regularly with mild soap and water.
- Výměna filtru: Replace the Brita Standard Filter every 40 gallons or approximately every 2 months, based on average family usage. Follow the filter indicator for optimal performance.
Image: Diagram highlighting the Brita dispenser's features such as easy to fill and clean, BPA-free construction, and fridge-friendly size.
Odstraňování problémů
Než se obrátíte na zákaznický servis, prostudujte si prosím následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Výrobník ledu nevyrábí led. | No water in reservoir; power not connected; ambient temperature too high. | Fill water reservoir; check power connection; ensure proper ventilation and cooler environment. |
| Svítí kontrolka „PŘIDAT VODU“. | Hladina vody je nízká. | Naplňte nádržku na vodu pitnou vodou. |
| Svítí kontrolka „LED PLNÝ“. | Koš na led je plný. | Vyjměte led z koše. |
| Brita dispenser filters slowly. | Filter is clogged or needs replacement. | Replace the Brita filter as indicated by the filter life indicator or after 2 months/40 gallons. |
| Water tastes unusual from Brita dispenser. | Je třeba vyměnit filtr. | Replace the Brita filter. |
Specifikace
Silonn Ice Maker
- Výroba ledu: 9 kostek za 6 minut
- Denní kapacita: Up to 26 lbs (11.8 kg) in 24 hours
- Tvar ledu: Kulka
- Velikosti ledu: 2 (Small, Large)
- Typ instalace: Pracovní deska
- svtage: 115 voltů
- Hladina hluku: Méně než 35 dB
- Chladivo: R600a
- Vlastnosti: Self-cleaning function, transparent lid, indicator lights
Obrázek: Explodoval view of the Silonn ice maker highlighting bullet-shaped ice cubes, advanced infrared sensor, and ultra-efficiency compressor.
Brita Water Filter Dispenser
- Kapacita: 27 cups total (9-cup reservoir, 18-cup body)
- Materiál: Plast bez BPA
- Typ filtru: Brita Standard Filter
- Životnost filtru: Přibližně 40 galonů nebo 2 měsíce
- Filtrace: Reduces chlorine (taste & odor), mercury, copper, and more
- Vlastnosti: Filter indicator, easy-pour spigot, fridge-friendly size
Záruka a podpora
For specific warranty details, please refer to the documentation included with your product or visit the manufacturer's official website. Silonn offers US-based phone service for customer support.
Pro další pomoc můžete navštívit Silonn Store on Amazon.
