1. Konec produktuview
The Rockler Deluxe Parallel Clamps are designed to assist woodworkers in achieving perfectly flat panels and flush joints during gluing operations. These clamps utilize rigid steel cauls to sandwich the panel, ensuring alignment and preventing buckling. The innovative four-way pressure system applies force both horizontally to squeeze glue joints and vertically to hold boards flat, significantly reducing the need for extensive post-gluing sanding.
Image 1.1: The Rockler Deluxe Parallel Clamp, shown with its original packaging.
2. Součásti zahrnuty
Each Rockler Deluxe Parallel Clamp set includes the following components:
- 1 set of Clamp Kolejnice
- 1 třamp Headstock with Handle
- 1 třamp Koník
- 2 třamp Nohy
Image 2.1: All components of the Rockler Deluxe Parallel Clamp set laid out.
3. Nastavení a seřízení
The Rockler Deluxe Parallel Clamps are designed for easy adjustment to accommodate various woodworking projects. They can clamp stock from 3/4 inch to 3 inches thick and panels from 10 inches to 36 inches wide. The thick steel construction and scissor-action couplers ensure durability and effective clamping for items such as table tops, wide door panels, and thick bench tops.
- Prepare Your Workpiece: Ensure your wood panels are properly prepared for gluing, with clean and flat edges.
- Pozice Clamp Kolejnice: Umístěte třamp rails on a stable, flat workbench. The included clamp feet provide clearance for easier adjustment and repositioning.
- Adjust for Thickness: Upravte třamp headstock and tailstock to the approximate thickness of your panel. The scissor-action couplers allow for quick and precise adjustments.
- Vložit panel: Carefully position your panel between the clamp kolejnice.
Image 3.1: Demonstrating the adjustment of the clamp for different wood thicknesses.
Video 3.1: An instructional video demonstrating the setup and adjustment of the Rockler Deluxe Single Panel Clamps.
4. Návod k obsluze
Follow these steps for effective operation of your Rockler Deluxe Parallel Clamps to ensure flat and flush panel glue-ups:
- Naneste lepidlo: Apply an even layer of wood glue to the mating edges of your panel pieces.
- Assemble Panel: Carefully bring the glued edges together to form your panel.
- Position in Clamps: Place the assembled panel between the adjusted clamp rails. Ensure the panel is centered and supported.
- Aplikujte tlak: Engage the scissor-action couplers and begin tightening the clamp handle. The four-way pressure system will simultaneously squeeze the glue joints together and apply downward pressure to keep the boards flat.
- Kontrola zarovnání: Verify that the panel is aligned and all joints are flush. Make minor adjustments if necessary before fully tightening.
- Doba vytvrzování: Allow the glue to cure completely according to the glue manufacturer's instructions before removing the clamps.
- Odstraňte Clamps: Once the glue is fully cured, loosen the clamp handles and carefully remove the clamps from the panel.
Image 4.1: Preparing wood pieces with glue before clampIng.
Image 4.2: A wooden panel held flat and secure by two parallel clamps during the gluing process.
Image 4.3: Multiple clamps used to apply even pressure across a larger panel.
5. Údržba
Proper maintenance ensures the longevity and optimal performance of your Rockler Deluxe Parallel Clamps:
- Čištění: After each use, wipe down the clamp rails and mechanisms to remove any glue residue or sawdust. A damp Lze použít hadřík a poté suchý hadřík.
- Mazání: Periodically apply a light lubricant to the screw threads and moving parts of the headstock and tailstock to ensure smooth operation.
- Inspekce: Pravidelně kontrolujte třamps for any signs of wear, damage, or loose components. Address any issues promptly to prevent further damage or compromised performance.
- Skladování: Uložte clamps in a dry environment to prevent rust and corrosion.
6. Řešení problémů
If you encounter issues while using your Rockler Deluxe Parallel Clamps, consider the following:
- Panel Not Flat: Ensure sufficient downward pressure is applied. Check that the clamp feet are properly positioned and that the workpiece thickness is within the clamp's specified range. Using additional clamps for wider panels can also help.
- Joints Not Flush: Verify that the mating edges of your wood pieces are perfectly straight and clean before applying glue. Ensure even pressure is applied across the entire joint.
- Obtížnost nastavení: Check for any debris or glue residue in the adjustment mechanisms. Lubricate moving parts if they feel stiff.
- Clamp Uklouznutí: Ensure the workpiece is securely seated in the clamp and that the tightening handle is fully engaged.
7. Specifikace produktu
| Specifikace | Detail |
|---|---|
| Značka | ROCKLER |
| Číslo modelu | 733175671644 |
| Materiál | Legovaná ocel |
| Rozměry položky (D x Š x V) | 42.7 x 6.3 x 6.3 palce |
| Hmotnost položky | 15.92 liber (7.24 kilogramů) |
| Adjustable Stock Thickness | 3/4" až 3" |
| Adjustable Panel Width | 10" až 36" |
| Steel Rail Thickness | 1.8 mm |
| Barva | Modrý |
8. Informace o záruce
Rockler Woodworking and Hardware products are manufactured to high-quality standards. For specific warranty details regarding your Deluxe Parallel Clamps, please refer to the warranty documentation included with your purchase or visit the official Rockler website. Generally, products are covered against defects in materials and workmanship under normal use.
9. Zákaznická podpora
Should you require assistance, have questions about your Rockler Deluxe Parallel Clamps, or need to report an issue, please contact Rockler Customer Service:
- online: Visit the official Rockler Woodworking and Hardware webweb s častými dotazy, informacemi o produktech a kontaktními formuláři.
- Telefon: Refer to the contact information provided in your product packaging or on the Rockler webstránky pro přímou telefonickou podporu.
Při kontaktování podpory mějte prosím po ruce číslo modelu produktu (733175671644) a podrobnosti o nákupu.
