Konec produktuview
The Keeley Caverns V2 is a dual-effect pedal combining high-quality delay and reverb effects, designed for guitarists seeking versatile time-based effects in a compact form factor. It features Keeley's analog-style tape delay with modulation options and offers Spring, Shimmer, or Modulated Reverb. The pedal includes a True-Bypass or Trails option for flexible signal routing.
This bundle also includes a 3-pack of MXR Patch Cables (6 inches / 15 cm). These cables are designed for connecting effects pedals on a pedalboard, featuring oxygen-free copper conductors and spiral shields for clear signal transmission, and flat, low-profile right-angle ends for efficient space utilization.
Image: Keeley Caverns V2 pedal shown alongside the MXR 3-pack patch cables.
Nastavení a připojení
Proper setup ensures optimal performance and sound quality. Follow these steps to integrate your Keeley Caverns V2 pedal and MXR patch cables into your signal chain.
Keeley Caverns V2 Pedal Setup
- Napájení: The Caverns V2 pedal requires a 9V DC center-negative power supply (not included) with a minimum of 75mA. Connect the power supply to the 9VDC input jack on the top of the pedal.
- Vstupní připojení: Connect your guitar or the output of a preceding effects pedal to the "IN" jack on the top of the Caverns V2 using a standard 1/4-inch instrument cable.
- Výstupní připojení: Connect the "OUT" jack of the Caverns V2 to your amplifier's input or the input of the next effects pedal in your chain using a standard 1/4-inch instrument cable.
- True-Bypass/Trails Option: The Caverns V2 offers a switchable True-Bypass or Trails option. Refer to the pedal's specific instructions (often an internal dip switch or external toggle) for how to select this mode. Trails mode allows the delay and reverb to naturally decay after the effect is disengaged.
MXR Patch Cable Usage
- Připojení pedálů: Use the MXR patch cables to connect the output of one effects pedal to the input of another. The right-angle connectors are ideal for minimizing space between pedals on a pedalboard.
- Správa kabelů: Arrange cables neatly to prevent tangles and accidental disconnections. The flat profile of these cables assists in maintaining a tidy pedalboard.
Image: MXR 6-inch patch cables with right-angle connectors, designed for pedalboard use.
Operating the Keeley Caverns V2 Pedal
The Caverns V2 pedal features intuitive controls for both its delay and reverb sections. Familiarize yourself with each knob and switch to sculpt your desired sound.
Image: Diagram of the Keeley Caverns V2 pedal with numbered controls.
| Žádný. | Řízení | Funkce |
|---|---|---|
| 1 | BLEND (Reverb) | Adjusts the mix of the dry signal with the reverb effect. Turn clockwise for more reverb. |
| 2 | DECAY (Reverb) | Controls the length of the reverb tail. Higher settings result in longer decay times. |
| 3 | WARMTH (Reverb) | Shapes the tone of the reverb, from brighter to warmer sounds. |
| 4 | REVERB Mode Switch | Selects the reverb type: Lesk: Adds an octave-up effect to the reverb tail. Jaro: Emulates a classic spring reverb tank. Modulated: Adds a subtle chorus-like modulation to the reverb. |
| 5 | BLEND (Delay) | Adjusts the mix of the dry signal with the delay effect. Turn clockwise for more delay. |
| 6 | TIME (Delay) | Sets the delay time, from short slapback to longer echoes (up to 650ms). |
| 7 | RATE (Delay) | Controls the rate of the modulation applied to the delay. |
| 8 | DELAY Mode Switch | Selects the delay modulation depth: Světlo: Subtle modulation. Vypnuto: No modulation. Hluboký: Pronounced modulation. |
| 9 | REVERB Footswitch | Engages or disengages the reverb effect. The associated LED indicates status. |
| 10 | DELAY Footswitch | Engages or disengages the delay effect. The associated LED indicates status. |
| 11 | Reverb LED Indicator | Illuminates when the reverb effect is active. |
| 12 | Delay LED Indicator | Illuminates when the delay effect is active. |
Údržba
Regular maintenance helps prolong the life of your Keeley Caverns V2 pedal and MXR patch cables.
- Čištění: Use a soft, dry cloth to clean the pedal and cables. Avoid abrasive cleaners or solvents, which can damage the finish or internal components.
- Skladování: Store the pedal and cables in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, disconnect all cables and power.
- Péče o kabely: Avoid sharp bends or kinks in the patch cables, as this can damage the internal wiring. Coil cables loosely when storing.
- Spojení: Periodically check all jacks and plugs for cleanliness and secure connections. Dirty or loose connections can cause signal loss or noise.
Odstraňování problémů
If you encounter issues with your Keeley Caverns V2 pedal or MXR patch cables, refer to the following common problems and solutions.
| Problém | Řešení |
|---|---|
| Žádný zvuk při sešlápnutí pedálu. |
|
| Nadměrný hluk nebo hučení. |
|
| Delay or Reverb effect is too subtle/overpowering. |
|
| Cables not working. |
|
Specifikace
Keeley Caverns V2 Reverb and Delay Pedal
- Typ efektu: Delay and Reverb with Modulation
- Doba zpoždění: Up to 650ms (analog-style tape delay)
- Typy dozvuku: Spring, Shimmer, Modulated
- Bypass: True-Bypass or Trails option
- Požadavek na napájení: 9V DC Center Negative, 75mA+ (Power supply not included)
- Vstup/Výstup: Mono Instrument Input, Mono Instrument Output (1/4-inch jacks)
- Formát signálu: Analogový
- Model: KCav2
MXR Patch Cable 3 Pack
- Délka: 6 palců (15 cm)
- Konektory: Right-angle 1/4-inch plugs
- Vodiče: Měď bez obsahu kyslíku
- stínění: 90% coverage spiral shielding
- Bunda: Durable PVC outer jacket
- Model: 3PDCP06
- UPC: 0710137091214
Záruka a podpora
For warranty information and technical support regarding your Keeley Caverns V2 pedal, please refer to the official Keeley Electronics website or contact their customer service directly. MXR patch cables typically come with a limited lifetime warranty; details can be found on MXR's official webmísto nebo obal produktu.
Pro obecné dotazy nebo další pomoc můžete také navštívit Keeley Store on Amazon.
