1. Nastavení
1.1 Vybalení a úvodní kontrola
Carefully remove the Lian Li Lancool 216 PC case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including screws and mounting hardware, are present.
1.2 Demontáž panelu
The Lancool 216 is designed for easy access to internal components. Most panels can be removed without tools.
- Boční panely: Gently pull the tempered glass side panel to detach it. The solid side panel can also be removed by pulling it away from the chassis.
- Horní panel: The top panel, featuring a fine mesh, can be easily lifted off for access to the top fan/radiator mounts.
- Přední panel: The front mesh panel is designed for optimal airflow and can be detached for cleaning or fan installation.
Obrázek 1: Vnitřní view of the Lian Li Lancool 216 case, showing the spacious interior and cable routing options.
Figure 2: The removable top radiator bracket for easier installation of cooling solutions.
1.3 Instalace základní desky
The Lancool 216 supports E-ATX (under 280mm), ATX, Micro-ATX, and Mini-ITX motherboards. Install standoffs as required for your motherboard size. Secure the motherboard with screws.
Figure 3: The adjustable motherboard tray allows for configurations optimized for either air or water cooling.
1.4 Instalace ventilátoru a chladiče
The case comes with dual front 160mm PWM fans and one rear 140mm PWM fan. Additional fans and radiators can be installed:
- Přední: Supports 3 x 120mm, 2 x 140mm, or 2 x 160mm fans. Radiator support up to 360mm.
- Nahoře: Supports 3 x 120mm or 2 x 140mm fans. Radiator support up to 360mm. The top mounting bracket is removable for ease of installation.
- Bottom (PSU Cover): Supports 2 x 120mm or 2 x 140mm fans (Air Cooling mode). Radiator support up to 240mm.
- Zadní: Supports 1 x 120mm or 1 x 140mm fan.
- PCIe Fan Bracket: Podporuje 1 x 120mm ventilátor.
Figure 4: The fine mesh front panel ensures maximum airflow for optimal cooling performance.
1.5 Instalace měniče
The Lancool 216 offers multiple drive mounting options:
- Drive Cage: 2 x 2.5” SSD + 2 x 3.5” HDD.
- Kryt PSU: 2 x 2.5” SSD.
- Behind MB Tray: 2 x 2.5” SSD.
1.6 Instalace grafické karty
The case supports GPUs up to 392mm in length. It features a rotatable PCIe expansion slot panel, allowing for both standard horizontal and vertical GPU mounting (riser cable sold separately).
Obrázek 5: Zadní view showing the rotatable PCIe slots, enabling vertical GPU mounting.
1.7 Správa kabelů
The Lancool 216 is designed with cable management in mind. Utilize the three Velcro straps behind the motherboard tray and two additional straps above the PSU chamber to bundle and route cables neatly. This helps maintain optimal airflow and a clean build appearance.
Figure 6: Integrated Velcro straps and routing channels for efficient cable management.
2. Provoz
2.1 Zapnutí/vypnutí
Press the Power Button located on the front I/O panel to turn the PC on or off. A Reset Button is also available for system restarts.
2.2 Front I/O Port Usage
The front I/O panel provides convenient access to:
- 2 x USB 3.0 porty pro vysokorychlostní přenos dat.
- 1 x USB Type-C port for modern connectivity.
- 1 x Audio jack for headphones or microphones.
2.3 Ovládání ventilátoru
The pre-installed PWM fans can be controlled via your motherboard's fan headers and BIOS/software settings. Refer to your motherboard manual for detailed fan control instructions.
3. Údržba
3.1 Čištění prachového filtru
The Lancool 216 includes a bottom dust filter. Regularly remove and clean this filter to maintain optimal airflow and prevent dust buildup inside the case. The front and top mesh panels can also be cleaned with compressed air or a soft brush.
3.2 Obecné čištění
For the exterior, use a soft, damp cloth to wipe down surfaces. Avoid abrasive cleaners. For the interior, use compressed air to remove dust from components and internal surfaces.
4. Řešení problémů
4.1 Bez napájení
Ensure all power cables are securely connected to the power supply, motherboard, and components. Verify that the power supply unit (PSU) switch is in the 'ON' position.
4.2 Ventilátory se netočí
Check that all fan cables are correctly connected to the motherboard's fan headers. Ensure fan control settings in the BIOS or software are configured correctly.
4.3 Přehřátí
Verify that all fans are spinning and oriented correctly for optimal airflow (front/bottom intake, rear/top exhaust). Clean all dust filters and ensure no cables are obstructing airflow. Check thermal paste application on CPU cooler.
5. Specifikace
| Funkce | Specifikace |
|---|---|
| Model | LANCOOL 216-X |
| Rozměry (D x Š x V) | 480.9 mm x 235 mm x 491.7 mm |
| Barva | Černý |
| Materiál | Steel / 4.0mm Tempered Glass |
| Podpora základní desky | E-ATX (Under 280mm) / ATX / Micro-ATX / Mini-ITX |
| Podpora ventilátoru (horní) | 3 x 120 mm / 2 x 140 mm |
| Fan Support (PSU Cover) | 2 x 120mm / 2 x 140mm (Air Cooling mode) |
| Podpora ventilátoru (přední) | 3 x 120mm / 2 x 140mm / 2 x 160mm (2 x 160mm PWM pre-installed) |
| Podpora ventilátoru (zadní) | 1 x 120mm / 1 x 140mm (1 x 140mm PWM pre-installed) |
| Fan Support (PCIe Fan Bracket) | 1 x 120 mm |
| Držák chladiče (přední) | 360 / 280 / 240 mm |
| Držák chladiče (horní) | 360 / 280 / 240 mm |
| Radiator Support (Bottom) | 240 mm |
| PSU Support Length | ATX (Under 220mm) |
| Vůle délky GPU | 392mm (max) |
| Výška chladiče CPU | 180.5mm (max) |
| Drive Bays | Drive Cage: 2 x 2.5” SSD + 2 x 3.5” HDD; PSU Cover: 2 x 2.5” SSD; Behind MB tray: 2 x 2.5” SSD |
| Rozšiřující sloty | 7 |
| I/O porty | 1 x Power Button, 1 x Reset Button, 2 x USB 3.0, 1 x USB Type C, 1 x Audio |
| Prachové filtry | 1 x dno |
Figure 7: Detailed dimensions of the Lancool 216 chassis.
6. Záruka a podpora
6.1 Informace o záruce
Lian Li products typically come with a manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty duration and terms may vary by region and product. Refer to the official Lian Li webweb s nejaktuálnějšími záručními podmínkami.
6.2 Technická podpora
For technical assistance, troubleshooting, or any questions regarding your Lian Li Lancool 216 PC case, please visit the official Lian Li support website or contact their customer service department. You may find FAQs, driver downloads, and contact information for your region.