Návod k obsluze nástěnného LED svítidla TRIO Arino

1. Úvod

Thank you for choosing the TRIO Arino LED Wall Light. This modern luminaire combines matte black metal with natural wood, creating a warm and inviting atmosphere. Featuring integrated energy-efficient LED technology and a convenient switch dimmer function, this wall light is designed for optimal illumination and ease of use in indoor environments.

2. Bezpečnostní pokyny

• Elektrická bezpečnost: Always disconnect the power supply at the main circuit breaker before installation, maintenance, or cleaning. Installation should be performed by a qualified electrician to ensure safety and compliance with local regulations.
• Pouze pro vnitřní použití: This product has an IP20 rating, indicating it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for dry indoor locations only.
• Nevyměnitelná LED: The LED light source in this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
• Zacházení: Handle the product with care to avoid damage to the light source or housing.

3. Obsah balení

Zkontrolujte prosím, zda jsou všechny součásti přítomny a nepoškozené:

• 1 x TRIO Arino LED Wall Light
• 1 x Set of Mounting Material (screws, wall plugs)
• 1 x Návod k obsluze (tento dokument)

4. Nastavení a instalace

Důležité: Před zahájením instalace se ujistěte, že je hlavní napájení vypnuto.

1. Příprava: Choose a suitable indoor location for the wall light. Mark the drilling points on the wall according to the luminaire's mounting plate.
2. Vrtání: Drill holes at the marked positions and insert the provided wall plugs.
3. Zapojení: Connect the electrical wires from the wall to the terminal block of the luminaire. Ensure correct polarity (Live, Neutral, Earth) as per local electrical codes. Secure the connections.
4. Montáž: Attach the luminaire's mounting plate to the wall using the screws. Carefully secure the light fixture to the mounting plate.
5. Závěrečná kontrola: Ensure all connections are secure and the luminaire is firmly mounted.

5. Návod k obsluze

The TRIO Arino LED Wall Light features an integrated Switch Dimmer function, allowing you to adjust the brightness using your existing conventional wall switch. No external dimmer is required.

1. Turning On (100% Brightness): Flip your wall switch ON. The light will illuminate at 100% brightness.
2. Dimming to 50%: To reduce brightness, quickly flip the wall switch OFF and then ON again within 1-2 seconds. The light will now operate at 50% brightness.
3. Dimming to 25%: To further reduce brightness, quickly flip the wall switch OFF and then ON again within 1-2 seconds. The light will now operate at 25% brightness.
4. Vypínání: Flip the wall switch OFF.
5. Cyklus: The light cycles through 100% > 50% > 25% > OFF with each quick OFF/ON sequence. If the light is left OFF for more than 5 seconds, it will reset to 100% brightness when turned ON again.

6. Údržba

To maintain the appearance and functionality of your TRIO Arino LED Wall Light:

• Čištění: Ensure the power is off before cleaning. Wipe the surface with a soft, dry, or slightly damp tkanina.
• Vyhněte se chemikáliím: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish of the metal and wood.
• Odstranění prachu: Regularly dust the luminaire to prevent accumulation that could affect light output.

7. Řešení problémů

If you encounter issues with your TRIO Arino LED Wall Light, please refer to the following common problems and solutions:

• Světlo se nerozsvítí:
  • Check if the main power supply is switched ON.
  • Ověřte, zda je nástěnný vypínač v poloze ZAPNUTO.
  • Ensure all electrical connections are secure (consult a qualified electrician if unsure).
• Dimmer Function Not Working:
  • Ensure you are performing the quick OFF/ON sequence correctly within 1-2 seconds to cycle through brightness levels.
  • If the light was OFF for an extended period, it will reset to 100% brightness upon the first ON. Try the OFF/ON sequence again.
• Blikající světlo:
  • Zkontrolujte, zda nejsou uvolněné kabelové spoje.
  • Zajistěte zvtagDodávka je stabilní a v rámci stanoveného rozsahu.

Pokud tyto kroky problém nevyřeší, kontaktujte zákaznickou podporu nebo kvalifikovaného elektrikáře.

8. Specifikace

9. Záruka

This product is covered by the manufacturer's standard warranty. Please refer to the terms and conditions provided at the point of purchase or contact your retailer for specific warranty details. Keep your proof of purchase for any warranty claims.

10. Podpora

For technical assistance, troubleshooting beyond this manual, or inquiries regarding spare parts, please contact your retailer or the TRIO Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official webmísto.