Sada děrovačů do kůže WORKPRO Desktop (model W031407) - Návod k obsluze

1. Úvod

The WORKPRO Desktop Leather Hole Punch Set (Model W031407) is designed for creating clean, precise holes in various materials. Its desktop design enhances stability and ease of use, making it suitable for a range of crafting and repair tasks. This manual provides detailed instructions for safe and effective operation, maintenance, and troubleshooting.

Figure 1: The WORKPRO Desktop Leather Hole Punch Set, featuring its ergonomic handle and desktop base, accompanied by spare punch plates.

2. Vlastnosti produktu

• Six Punch Sizes: The rotary punch head offers multiple hole sizes: 5/64'' (2mm), 3/32'' (2.5mm), 1/8'' (3mm), 9/64'' (3.5mm), 5/32'' (4mm), and 11/64'' (4.5mm). The selected size is displayed on the plastic disk for easy identification.
• Bezproblémová obsluha: Features a double lever design with a wide handle to reduce the force required for punching, minimizing user fatigue.
• Vylepšená stabilita: Designed for desktop use, providing greater stability than traditional handheld punchers. It includes a 360-degree rotary support bar and two non-slip pads on the base.
• Odolná konstrukce: The tool is constructed from robust zinc alloy for longevity. The punch heads are made of chromium, ensuring sharpness and resistance to wear.
• Všestranná aplikace: Capable of punching holes in various materials including leather, paper, rubber, fabrics, and canvas.

Figure 2: Detail of the rotary punch head, illustrating the six available hole sizes for diverse applications.

3. Bezpečnostní informace

• Always keep fingers clear of the punching mechanism during operation.
• Use the tool on a stable, flat surface to prevent accidental movement.
• Ensure the material being punched is properly positioned to avoid injury or damage to the tool.
• Nástroj skladujte na bezpečném místě mimo dosah dětí.
• Wear appropriate safety glasses to protect your eyes from debris.

4. Obsah balení

Your WORKPRO Desktop Leather Hole Punch Set includes:

• 1 x WORKPRO Desktop Leather Hole Punch Tool
• 5 x Plastic Punch Plates (replaceable)

5. Nastavení a provoz

Follow these steps to set up and operate your leather hole punch tool:

5.1. Unlocking the Tool

1. Press the handles together to unlock the tool. This will release the locking mechanism, allowing the handles to open.

Figure 3: Pressing the handles to unlock the tool for use.

5.2. Selecting Punch Size

2. Rotate the punch head to select the desired hole size. Ensure the chosen punch aligns directly above the anvil (the plastic punch plate). The size is indicated on the side of the rotary head.

Figure 4: Rotating the punch head to select the appropriate hole size.

5.3. Punching a Hole

3. Place the material (e.g., leather belt) between the selected punch and the plastic punch plate. Position the tool on a stable desktop surface.
4. Press down firmly and steadily on the handle. The double lever mechanism will assist in applying sufficient force. For optimal results, turn the punch slightly left and right a few times while pressing to ensure a clean cut and prevent adhesion.

Figure 5: Demonstrating the lever mechanism for punching a hole in a leather belt.

Figure 6: Proper alignment of the material and punch for accurate hole creation.

5.4. Cleaning and Locking After Use

4. After punching, remove any residue from the punch head. A thin wire or finishing nail can be used to push out trapped material from the punch tube.
5. To store, rotate the punch head so that a solid part of the wheel is over the anvil, and press the handles together to engage the locking pin. This keeps the tool compact and safe.

Figure 7: Removing material residue from the punch head after use.

Figure 8: Locking the tool for safe and compact storage.

6. Údržba

• Čištění: Regularly clean the punch heads and the anvil to ensure optimal performance and prevent material buildup.
• Punch Plate Replacement: The package includes 5 plastic punch plates. These can be rotated to utilize unused sections. If all sections are worn, a piece of the product packaging can be used as a temporary punching pad.
• Kontrola zarovnání: If the plastic hole size indicator is in a dislocation position, manually rotate it to align with the maximum or minimum size of the punch for correct indication.

7. Řešení problémů

• Hole Not Cleanly Cut / Material Adhesion: When punching, turn the tool slightly left and right a few times while pressing down. This helps ensure a cleaner cut and prevents the material from sticking inside the punch.
• Punch Size Indicator Misalignment: If the plastic hole size indicator is in a dislocation position, manually rotate it to align with the maximum or minimum size of the punch.

8. Specifikace

9. Oficiální video produktu

Watch the official product video for a visual guide on the WORKPRO Desktop Leather Hole Punch Set's features and operation.

10. Záruka a podpora

For warranty information, technical support, or any inquiries regarding your WORKPRO Desktop Leather Hole Punch Set, please contact the manufacturer directly or refer to the product packaging for specific details. Keep your purchase receipt as proof of purchase.