Důležité bezpečnostní pokyny
Před použitím spotřebiče si pečlivě přečtěte tento návod a uschovejte si jej pro budoucí použití. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.
- Vždy se ujistěte, že je ventilátor umístěn na stabilním, rovném povrchu, aby se zabránilo jeho převrácení.
- Nevkládejte prsty ani žádné předměty do mřížky ventilátoru, když je v provozu.
- Před čištěním nebo prováděním jakékoli údržby odpojte ventilátor ze zásuvky.
- Keep the power cord away from heated surfaces and do not run it under carpets.
- Tento spotřebič je určen pouze k použití v interiéru. Nepoužívejte venku ani ve vlhkém prostředí.
- Neprovozujte ventilátor s poškozeným kabelem nebo zástrčkou. Pro opravu se obraťte na kvalifikovaný servisní personál.
Konec produktuview
The Cecotec EnergySilence 600 Woodstyle Pedestal Fan is designed to provide powerful and quiet airflow for your comfort. It features a robust motor, adjustable height, and an oscillation function to distribute air effectively.

Figure 1: Fully assembled Cecotec EnergySilence 600 Woodstyle Pedestal Fan, showcasinjeho design a proudění vzduchu.
Nastavení a montáž
Follow these steps to assemble your Cecotec EnergySilence 600 Woodstyle Pedestal Fan:
- Sestava základny: Attach the main pole to the circular base. Ensure it is securely fastened using the provided screws or locking mechanism.
- Telescopic Pole Adjustment: Insert the upper telescopic pole into the lower pole. Adjust the height to your desired level (between 90 cm and 125 cm) and secure it with the height adjustment knob.
- Motor Unit Attachment: Mount the fan motor unit onto the top of the telescopic pole. Ensure it clicks into place or is secured with the designated screw.
- Grille and Blade Installation: Carefully attach the rear grille to the motor unit. Then, place the fan blades onto the motor shaft, securing them with the retaining cap. Finally, attach the front grille and secure it with the clips or screws provided.

Figure 2: Illustration of the fan's adjustable height feature, allowing customization from 90 cm to 125 cm.
Once assembled, ensure all connections are tight and the fan is stable before plugging it into a power outlet.
Návod k obsluze
Your Cecotec fan offers simple controls for optimal comfort.
- Zapnutí/vypnutí: Plug the fan into a standard electrical outlet. Use the control knob located on the motor unit to turn the fan on or off.
- Výběr rychlosti: Rotate the control knob to select one of the three available speeds:
- Nízký: For gentle airflow and minimal noise.
- Střední: Pro mírné chlazení.
- Vysoký: Pro maximální proudění vzduchu a rychlé chlazení.
- Funkce oscilace: To activate the automatic oscillation, press down the oscillation pin located on top of the motor unit. The fan head will sweep from side to side, distributing air across a wider area. Pull the pin up to stop oscillation and direct airflow in a fixed direction.
- Nastavení sklonu: The fan head can be manually tilted up or down to direct airflow precisely where needed. Gently push or pull the fan head to adjust its angle.

Obrázek 3: Detail view of the control knob on the fan's motor unit, used for power and speed selection.

Figure 4: The fan operating with its oscillation feature, effectively circulating air within a living space.
Údržba a péče
Regular cleaning and proper care will ensure the longevity and efficient operation of your fan.
- Čištění:
- Před čištěním vždy odpojte ventilátor.
- Použijte měkký, damp hadříkem k otření vnějších povrchů. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- To clean the fan blades and inside the grilles, you may need to carefully remove the front grille. Refer to the assembly instructions for reverse steps. Use a soft brush or vacuum cleaner to remove dust and debris.
- Před opětovnou montáží a zapojením ventilátoru se ujistěte, že jsou všechny díly zcela suché.
- Skladování: Pokud ventilátor delší dobu nepoužíváte, skladujte jej na chladném a suchém místě, nejlépe v originálním obalu, abyste jej chránili před prachem a poškozením.
- Mazání motoru: Motor ventilátoru je trvale mazaný a nevyžaduje žádné další mazání.
Odstraňování problémů
Pokud narazíte na jakékoli problémy s ventilátorem, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ventilátor se nezapne. | No power supply; fan unplugged; power outlet faulty; control knob not set to ON. | Check if the fan is properly plugged into a working outlet. Ensure the control knob is turned to a speed setting (Low, Medium, or High). |
| Slabé proudění vzduchu. | Otáčky ventilátoru jsou nastaveny příliš nízko; mřížky nebo lopatky jsou znečištěné. | Increase the fan speed. Clean the fan grilles and blades to remove dust buildup. |
| Neobvyklý zvuk nebo chrastění. | Loose parts; fan not on a stable surface; debris inside the grille. | Ensure all assembly screws are tight. Place the fan on a flat, stable surface. Unplug and check for any foreign objects inside the grilles or around the blades. |
| Oscilace nefunguje. | Oscillation pin not pressed down. | Press the oscillation pin down firmly to engage the oscillation function. |
If the problem persists after trying these solutions, please contact Cecotec customer support or your retailer for assistance.
Specifikace
- Model: EnergySilence 600 Woodstyle
- Číslo modelu: 08233
- Značka: Cecotec
- Moc: 50 W
- Průměr ventilátoru: 16 palců (40 cm)
- Počet nožů: 4
- Nastavení rychlosti: 3 (nízká, střední, vysoká)
- Kmitání: Automatický
- Nastavitelná výška: 90 cm až 125 cm
- Rozměry (sestavené): Přibližně 42 cm (hloubka) x 42 cm (šířka) x 134 cm (výška)
- Hmotnost: 5.7 kg
- Zdroj napájení: Elektrický kabel
- Produkt ASIN: B0BPZP1TY1
Záruka a zákaznická podpora
This Cecotec product is covered by a manufacturer's warranty. For detailed information regarding the warranty period, terms, and conditions, please refer to the warranty card included with your product or visit the official Cecotec webmísto.
For technical assistance, spare parts, or any inquiries not covered in this manual, please contact Cecotec customer support. Keep your purchase receipt and product model number (08233) handy when contacting support.
You can find contact information for Cecotec customer service on their official webwebu nebo prostřednictvím svého prodejce.





