Perlegear Full Motion TV Wall Mount for 37-85 inch TVs, Model PGLF4

1. Úvod

Thank you for choosing the Perlegear Full Motion TV Wall Mount, Model PGLF4. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read these instructions thoroughly before beginning installation and keep them for future reference.

2. Bezpečnostní informace

WARNING: Failure to read and follow these instructions may result in personal injury, property damage, or voiding your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support or a qualified installer.

• This product is designed for installation on 12"/16" wood studs, solid concrete, or concrete block walls. NEINSTALUJTE pouze na sádrokarton.
• Ensure the wall structure can safely support the combined weight of the mount and your TV. The maximum weight capacity for this mount is 132 lb (60 kg).
• Verify your TV's VESA pattern and weight are within the specified limits before installation.
• Use only the mounting hardware provided. If any parts are missing or defective, contact Perlegear customer service.
• Pro přesné nalezení dřevěných trámů vždy používejte detektor trámů.
• Do not overtighten screws, as this may cause damage and reduce the mount's stability.
• Během instalace držte děti mimo dosah.

3. Obsah balení

Please check to ensure all components are included and undamaged:

• Sestava nástěnné desky s kloubovými rameny
• Držáky na televizi (2 kusy)
• Montážní sada (různé šrouby, podložky, distanční podložky pro TV a zeď)
• Úroveň bublin
• Vrtací šablona
• Stahovací pásky (suchý zip)
• Návod k použití

4. Vlastnosti produktu

• Těžká konstrukce: Made from robust alloy steel, designed to securely hold TVs up to 132 lbs.
• Široká kompatibilita s televizory: Supports most 37-85 inch flat or curved TVs.
• Vyhovění VESA: Kompatibilní s VESA uchycením od 200x100 mm do 600x400 mm.
• Full Motion Adjustments:
  • Tool-Free Tilt: Adjust your TV 15° forward and 5° backward to reduce glare and optimize viewIng.
  • Otočný: Swivel your TV up to 45° left or right for flexible viewing úhly.
  • Prodloužení a zatažení: Extends up to 16.9 inches (43 cm) from the wall for immersive viewing and retracts to a slim 2.72 inches (6.9 cm) for a clean profile.
• Vylepšená stabilita: Features durable articulating arms, anti-drop end caps, and security locks to keep your TV safely in place.
• Vyrovnání po instalaci: Allows for a ±3° leveling adjustment after mounting to ensure a perfectly level screen.

5. Kompatibilita

Before installation, ensure your TV meets the following criteria:

• Velikost televizoru: Pasuje na většinu televizorů s úhlopříčkou 37-85 palců.
• Hmotnost televizoru: Váš televizor nesmí vážit více než 60 kg.
• Vzor VESA: The mounting holes on the back of your TV must match one of the following VESA patterns: 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x400mm, 600x400mm.
• Typ stěny: Suitable for 12"/16" wood stud walls, solid concrete walls, or concrete block walls. NEINSTALUJTE pouze na sádrokarton.

This image illustrates the wide compatibility of the mount, supporting TVs from 37 to 85 inches and various VESA patterns.

This diagram shows the supported wall types for installation: concrete, block walls, and 12-inch or 16-inch wood studs. It explicitly warns against mounting on drywall only.

6. Nastavení a instalace

Follow these general steps for installation. Refer to the detailed instructions provided in your package for specific diagrams and hardware usage.

6.1 Kontrolní seznam před instalací

• Ensure you have all necessary tools (e.g., drill, stud finder, screwdriver, pencil).
• Confirm your TV and wall meet the compatibility requirements.
• Have a helper available, especially for lifting the TV.

6.2 kroky instalace

1. Attach TV Brackets to Your TV: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are centered and securely fastened.
2. Mount the Wall Plate Assembly:
   • Use a stud finder to locate the center of your wood studs or mark the desired position on concrete/block walls.
   • Position the drilling template on the wall at your desired height and mark the pilot hole locations.
   • Drill pilot holes according to the instructions for your wall type.
   • Attach the wall plate assembly to the wall using the provided lag bolts and washers. Ensure it is level and securely tightened.
3. Zavěste televizi: Carefully lift your TV (with attached brackets) and hook the brackets onto the wall plate assembly. Engage the security locks to prevent accidental dislodgement.

This image shows the use of the handy drilling template to mark precise locations for mounting screws on the wall, simplifying the installation process.

This image displays the Perlegear TV wall mount securely installed on a wall, highlighting its maximum weight capacity of 132 lbs.

7. Návod k obsluze

Once installed, your Perlegear PGLF4 mount allows for various adjustments to achieve optimal viewIng.

• Nastavení sklonu: The mount features tool-free tilt. Locate the tilt adjustment levers on the TV brackets. Loosen them to adjust the TV's vertical angle (15° forward, 5° backward), then tighten to secure.
• Nastavení otáčení: Gently push or pull the TV to swivel it left or right (up to 45° in each direction) along the articulating arms.
• Prodloužení a zatažení: Extend the TV out from the wall by pulling it forward (up to 16.9 inches) or push it back towards the wall to retract (to 2.72 inches).
• Vyrovnání po instalaci: If your TV appears slightly unlevel after installation, use the ±3° leveling adjustment feature to fine-tune its horizontal position. Refer to your detailed manual for specific instructions on how to access and use this feature.

This image demonstrates the mount's ability to tilt the TV +5° to -15° and swivel ±45°, providing the best view from any seat.

This image shows a hand utilizing the tool-free tilt mechanism, allowing for easy adjustment of the TV's vertical angle without additional tools.

This image illustrates the mount's extension capability, allowing the TV to be pulled out 16.9 inches from the wall and retracted to a compact 2.72 inches.

8. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.

• Čištění: Otřete držák měkkým, suchým hadříkem, abyste odstranili prach. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Zkontrolujte připojení: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte, ale nepřetahujte je.
• Kontrola poškození: Pravidelně kontrolujte držák, zda nevykazuje známky opotřebení, poškození nebo koroze. Pokud zjistíte jakékoli problémy, přestaňte jej používat a kontaktujte zákaznickou podporu.

9. Řešení problémů

Pokud se během instalace nebo po ní setkáte s jakýmikoli problémy, podívejte se na následující běžná řešení:

• TV není vodorovně: Use the post-installation leveling adjustment feature (±3°) to correct the TV's horizontal alignment.
• Difficulty Moving/Adjusting TV: Ensure all adjustment levers and bolts are sufficiently loosened before attempting to move the TV. If the mount feels stiff, check for any obstructions or overtightened components.
• Hora se zdá být nestabilní: Recheck all wall and TV connections. Ensure lag bolts are securely fastened into studs or appropriate anchors in concrete. Verify the TV's weight does not exceed the mount's capacity.
• Chybějící části: If any parts are missing from your package, contact Perlegear customer support immediately.

10. Specifikace

11. Záruka a podpora

Perlegear provides a limited warranty for this product. For detailed warranty information, please refer to the warranty card included in your package or visit the official Perlegear webmísto.

Should you have any issues or questions, please do not hesitate to contact us:

• USA/CA: 1-800-456-5231 (Mon-Fri, 8am-8pm CST)
• UK/DE: 44-808-196-4165 (Mon-Fri, 2pm-10pm UTC)
• E-mail: support@perlegear.com
• Webmísto: www.perlegear.com