ANCEL TD700

Uživatelská příručka k skeneru ANCEL TD700 pro všechny systémy OBD2

Model: TD700 Značka: ZRUŠIT

1. Úvod

The ANCEL TD700 is a professional-grade diagnostic scan tool designed to provide comprehensive system diagnostics for Toyota, Lexus, and Scion vehicles. It also supports full OBD-II functions for all OBD-II compliant vehicles manufactured from 1996 onwards. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

2. Bezpečnostní informace

  • Always perform automotive testing in a well-ventilated area.
  • Wear safety eye protection and clothing that meets safety standards.
  • Avoid placing the device near the engine or exhaust system to prevent damage from high temperatures.
  • Neprovozujte zařízení za jízdy.
  • Keep the device dry and clean. Avoid contact with water, oil, or grease.
  • Refer to your vehicle's service manual for specific diagnostic procedures and safety precautions.

3. Obsah balení

  • 1x ANCEL TD700 All System OBD2 Scanner
  • 1x ANCEL Protective Case
ANCEL TD700 scanner and protective case

The ANCEL TD700 scanner neatly stored within its durable protective case.

4. Konec produktuview

The ANCEL TD700 features a user-friendly interface with a clear display and intuitive button layout for easy navigation and operation.

ANCEL TD700 OBD2 Scanner with protective case

The ANCEL TD700 scanner, showcasing its display and control buttons, alongside its protective carrying case.

Součásti zařízení:

  • Displej: Shows diagnostic results, menu options, and live data.
  • Navigační tlačítka (nahoru/dolů/vlevo/vpravo): Používá se k procházení nabídek a výběru možností.
  • Tlačítko ENTER: Potvrzuje výběr nebo akci.
  • EXIT/BACK Button: Návrat na předchozí obrazovku nebo zrušení operace.
  • Tlačítko I/M: Quick access to I/M Readiness status.
  • READ DTC Button: Directly reads Diagnostic Trouble Codes.
  • ERASE DTC Button: Directly clears Diagnostic Trouble Codes.
  • Konektor OBD-II: Connects the scanner to the vehicle's OBD-II port.

5. Nastavení

  1. Vyhledejte port OBD-II: The 16-pin Data Link Connector (DLC) is usually located under the dashboard on the driver's side of the vehicle.
  2. Vypněte zapalování: Ensure the vehicle's ignition is turned off before connecting the scanner.
  3. Připojení skeneru: Firmly plug the scanner's OBD-II connector into the vehicle's DLC.
  4. Zapněte zapalování: Zapněte zapalování vozidla (motor vypnutý). Skener se automaticky zapne.
  5. Start Diagnosis: Follow the on-screen prompts to begin your diagnostic session.

6. Návod k obsluze

6.1 General OBD-II Functions (for all OBD-II compliant vehicles)

The TD700 provides standard OBD-II diagnostic capabilities for engine systems.

ANCEL TD700 displaying multiple OBD level diagnostics options

The TD700's display showing various OBD-II diagnostic options, including Read Codes, Erase Codes, Live Data Stream, I/M Readiness, EVAP System Test, and Vehicle Information.

  • Číst kódy: Retrieves generic (P0, P2, P3, and U0) and manufacturer-specific (P1, P3, and U1) codes, as well as pending codes.
  • Vymazat kódy: Clears Diagnostic Trouble Codes (DTCs) from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL/Check Engine Light).
  • Živá data: Displays real-time operating parameters of the vehicle's engine in text or graph format.
  • Připravenost I/M: Checks the status of emission-related monitoring systems to ensure they are operating correctly.
  • Informace o vozidle: Retrieves the Vehicle Identification Number (VIN), Calibration ID (CID), and Calibration Verification Number (CVN).

6.2 Toyota/Lexus/Scion Specific Functions

The TD700 offers advanced, manufacturer-level diagnostics and special functions tailored for Toyota, Lexus, and Scion vehicles.

ANCEL TD700 displaying full system and special functions for Toyota, Scion, Lexus

The TD700's main menu showing options for OBDII, Toyota-specific diagnostics, Oil Reset, EPB Reset, BAT, BMS Reset, ETC Reset, and Tool Setup.

ANCEL TD700 performing all system diagnosis for Toyota vehicles

The TD700 displaying a menu for selecting various vehicle systems for diagnosis, such as Engine, Transmission, Airbag, TPMS, ABS, SAS, BMS, EPB, GPS, ESP, and A/C.

ANCEL TD700 displaying professional-level diagnostic functions for Toyota vehicles

The TD700 showing a menu for selecting special functions like Oil Reset, EPB Reset, ETC Reset, TPMS Reset, BMS Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Throttle Learning, Battery Registration, and Injector Coding.

  • All System Diagnosis: Accesses and diagnoses all available electronic control systems in compatible Toyota, Lexus, and Scion vehicles, including Engine, Transmission, ABS, Airbag (SRS), TPMS, SAS, BMS, EPB, A/C, and more.
  • Reset oleje: Resetuje kontrolku údržby oleje po výměně oleje.
  • Resetování EPB: Resetuje systém elektronické parkovací brzdy po výměně brzdových destiček.
  • BAT (Battery) Management System (BMS) Reset: Performs battery registration and reset functions.
  • Resetování atd.: Resetuje systém elektronického ovládání škrticí klapky.
  • Krvácení z ABS: Provádí odvzdušnění brzd ABS.
  • Kalibrace SAS: Kalibruje snímač úhlu řízení.
  • Regenerace DPF: Zahájí regeneraci filtru pevných částic.
  • Throttle Learning: Performs throttle body relearn procedures.
  • Registrace baterie: Zaregistruje novou baterii v systému vozidla.
  • Kódování vstřikovačů: Kóduje nová čísla vstřikovačů do řídicí jednotky motoru (ECU).

7. Údržba

  • Čištění: Použijte měkký, damp cloth with mild detergent to clean the scanner's exterior. Do not use abrasive cleaners or solvents.
  • Skladování: Store the device in its protective case in a dry, cool, and dust-free environment when not in use. Avoid direct sunlight or extreme temperatures.
  • Aktualizace softwaru: Pravidelně kontrolujte oficiální informace ANCEL. website for available software updates to ensure optimal performance and compatibility with the latest vehicle models.

8. Řešení problémů

  • Zařízení se nezapíná:
    Ensure the OBD-II cable is securely connected to the vehicle's DLC. Verify the vehicle's ignition is in the ON position. Check the vehicle's battery for sufficient charge.
  • Chyba komunikace:
    Confirm the vehicle's ignition is ON and the engine is OFF. Ensure the OBD-II connector is firmly seated. Verify the vehicle is OBD-II compliant (1996 or newer).
  • DTCs Not Clearing:
    Diagnostic Trouble Codes can only be cleared if the underlying fault has been rectified. Ensure the ignition is ON and the engine is OFF. If the issue persists, further diagnosis may be required.

9. Specifikace

FunkceDetail
ZnačkaZRUŠIT
ModelTD700
ASINB0BPPCHM44
První k dispozici10. prosince 2022

10. Záruka a podpora

For technical support, product inquiries, or warranty information, please contact ANCEL customer service through their official channels. Details can typically be found on the ANCEL webna místě nebo v obalu produktu.

Související dokumenty - TD700

Předview ANCEL TD700 Multi-System Scanner User Manual
The ANCEL TD700 is a multi-system diagnostic scanner designed for Toyota, Lexus, and Scion vehicles from 1996 to 2021. This user manual provides comprehensive instructions for OBDII diagnostics, including reading and erasing fault codes, I/M readiness checks, data stream analysis, and EVAP system tests. It also details special functions such as oil reset, throttle learning, and battery reset, ensuring optimal vehicle maintenance and troubleshooting.
Předview Uživatelská příručka k diagnostickému přístroji ANCEL DS700 | Funkce, nastavení a údržba
Komplexní uživatelská příručka k diagnostickému přístroji ANCEL DS700. Seznamte se s jeho funkcemi, nastavením, aktivací VCI, funkcemi údržby, aktualizacemi softwaru a řešením problémů.
Předview Průvodce odstraňováním problémů s používáním, upgradem a zpětnou vazbou ANCEL AD410
Komplexní průvodce s podrobným popisem běžných problémů, s nimiž se setkáváme při používání diagnostického skeneru pro automobily ANCEL AD410, včetně návodů k použití, aktualizací softwaru a zpracování dat zpětné vazby, včetně řešení a kroků pro odstraňování problémů.
Předview Průvodce aktualizací firmwaru ANCEL AD310: Podrobné pokyny
Tato příručka poskytuje jasné a podrobné pokyny pro aktualizaci firmwaru vašeho skeneru ANCEL AD310 OBD II. Naučte se, jak stáhnout, dekomprimovat, nainstalovat ovladače a provést proces aktualizace diagnostického přístroje pro vaše vozidlo.
Předview Uživatelská příručka k diagnostickému přístroji pro automobily ANCEL DS300
Komplexní uživatelská příručka k diagnostickému přístroji pro automobily ANCEL DS300, která zahrnuje produkt přes...view, technické specifikace, připojení, nastavení, funkce, nejčastější dotazy a informace o záruce.
Předview Profesionální diagnostický tablet ANCEL X7 – funkce, specifikace a softwarová příručka
Prozkoumejte ANCEL X7, profesionální diagnostický tablet s Androidem s rozsáhlým pokrytím vozidel, kompletní OBDII funkcionalitou a pokročilými funkcemi. Seznamte se s jeho specifikacemi tabletu a VCI, softwarem ke stažení a průvodcem aplikací.