Zavedení
Thank you for choosing the Linkind Outdoor Solar Motion Sensor Light. This product is designed to provide efficient and reliable outdoor illumination for your garden, pathway, garage, or porch. Featuring 1000LM brightness, 24 high-power LEDs, dual color temperatures (3000K Warm White & 6500K Cool White), and three intelligent operating modes, these IP67 waterproof lights offer enhanced security and ambiance. Please read this manual carefully before installation and use to ensure optimal performance and longevity.
Image: The Linkind solar light installed, casting a warm glow on a garden path at night.
Bezpečnostní informace
- Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
- Do not install the light near other strong light sources, as this may interfere with the motion sensor or automatic dusk-to-dawn operation.
- Udržujte solární panel čistý od prachu, nečistot a úlomků, aby byla zachována účinnost nabíjení.
- This product is IP67 waterproof, designed to withstand various weather conditions, but avoid submerging it in water.
- Do not attempt to disassemble or modify the product, as this will void the warranty and may cause damage.
- Uchovávejte mimo dosah dětí.
Obsah balení
Zkontrolujte prosím balení, zda jsou přítomny všechny komponenty:
- Linkind Outdoor Solar Motion Sensor Light (x2)
- Pozemní kolík (x2)
- Wall Mounting Screws and Anchors (x2 sets)
- Uživatelská příručka (tento dokument)
Vlastnosti produktu
- Vysoký jas: Equipped with 24 high-power LEDs, delivering up to 1000 lumens of bright illumination.
- Dvojitá teplota barev: Offers both 3000K Warm White and 6500K Cool White light options to suit different preferences and environments.
- Pohybový senzor: Advanced motion detection with a range of 3-8 meters and a 120° detection angle, ensuring light activates when needed.
- Tři provozní režimy: Customizable lighting modes for various scenarios (details in Operating Instructions).
- Vodotěsnost IP67: Designed to withstand harsh weather conditions, including rain, snow, and extreme temperatures.
- Vysoce účinný solární panel: Monocrystalline silicon solar panel with a 22% conversion rate for fast and efficient charging.
- Instalace 2 v 1: Versatile design allows for both ground insertion and wall mounting.
- Nastavitelný úhel: Light head can be adjusted vertically by 90° and horizontally by 270° for precise lighting direction.
Image: Feature comparison highlighting Linkind's cool & warm white, motion sensor, 1800mAh battery, 1000 lumens, and monocrystalline silicon solar panel.
Image: The solar light demonstrating its IP67 waterproof, frostproof, and heatproof capabilities under a water splash.
Obrázek: Podrobný view of the solar light's 24 LEDs and unique optical lens, emphasizing high charging efficiency and long illumination.
Image: A person and their dog walking past the solar light, illustrating its sensitive motion detection with a 3-8m range and 120° angle.
Nastavení a instalace
The Linkind solar light offers two installation options: ground insertion or wall mounting.
Vložení do země
- Vyberte režim: Before assembly, press the power button on the back of the light to select your desired operating mode (see Operating Instructions for details).
- Sestavte držák: Attach the light unit to the top part of the ground stake.
- Connect Spikes: Connect the two spike sections of the ground stake together.
- Vložte do země: Firmly insert the assembled light and stake into soft ground in a location that receives ample přímé sluneční světlo.
Montáž na stěnu
- Vyberte režim: Before assembly, press the power button on the back of the light to select your desired operating mode.
- Fix the Holder: Use the provided screws and anchors to securely fix the wall mounting bracket to a desired wall or fence.
- Connect the Two Parts: Attach the light unit to the wall mounting bracket.
- Upravte úhel: Adjust the angle of the solar panel and light head to ensure optimal sunlight exposure and lighting direction.
Image: Visual instructions for both ground insertion and wall mounting methods.
Návod k obsluze
The Linkind solar light features a single button to cycle through its three operating modes and to switch between warm and cool white light.
Změna teploty barev
To switch between 3000K Warm White and 6500K Cool White, dlouze stiskněte tlačítko napájení na 3 sekundu.
Cycling Through Modes (Short Press)
- Režim 1: Keeps dim light all night. The motion sensor does not react in this mode.
- Režim 2: Dim light when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
- Režim 3: Light is off when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
Image: Visual representation of the three lighting modes: always dim, dim with motion-activated bright, and off with motion-activated bright.
Údržba
- Čistý solární panel: Solární panel pravidelně otírejte měkkým hadříkemamp cloth to remove dust, dirt, or snow. A clean panel ensures maximum charging efficiency.
- Zkontrolujte umístění: Periodically check that the light's location still receives adequate direct sunlight, especially after seasonal changes or new foliage growth.
- Kontrola poškození: Occasionally inspect the light for any physical damage or loose connections.
- Baterie: The built-in Lithium-ion battery is designed for long life. Do not attempt to replace it yourself.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se v noci nerozsvítí. | Nedostatečné sluneční záření během dne. Solární panel je špinavý. Light is in "OFF" mode (Mode 3 without motion). Baterie je vybitá. | Přemístěte světlo do oblasti s větším množstvím přímého slunečního záření. Vyčistěte solární panel. Press the power button to cycle to Mode 1 or Mode 2. Allow 1-2 sunny days for the battery to fully charge. |
| Light flickers or has low brightness. | Partial charge of battery. Solar panel is partially obstructed or dirty. | Ensure full sunlight exposure for several hours. Vyčistěte solární panel a odstraňte všechny překážky. |
| Nefunkční senzor pohybu. | Light is in Mode 1 (always dim). Snímač je zablokovaný. Rušení vnějším světlem. | Přepněte do režimu 2 nebo režimu 3. Clear any debris or objects blocking the sensor. Relocate the light away from other strong light sources. |
| Barva světla se nemění. | Nesprávné stisknutí tlačítka. | Ensure you are long-pressing the power button for 3 seconds to switch between warm and cool white. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Linkind |
| Číslo modelu | LL1801131 |
| Světelný zdroj | 24 LED |
| Světelný tok | 1000 XNUMX lumenů |
| Teplota barev | 3000K teplá bílá a 6500K studená bílá |
| Dosah detekce pohybového senzoru | 3-8 metry |
| Úhel detekce pohybového senzoru | 120° |
| Hodnocení IP | IP67 |
| Zdroj napájení | Solární napájení |
| Typ baterie | 1 lithium-iontová (součástí balení) |
| Účinnost solárních panelů | 22% Conversion Rate (Monocrystalline Silicon) |
| Materiál | Akrylonitrilbutadienstyren (ABS) |
| Rozměry produktu (D x Š x V) | 15.4 x 4.8 x 10.1 cm (6.06 x 1.89 x 3.98 palce) |
| Hmotnost položky | 600 g (1.32 lb) |
Image: Detailed diagram illustrating the dimensions, adjustable angle, motion sensor, and PET surface layer of the solar light.
Záruka a podpora
For warranty information and customer support, please refer to the product packaging or contact Linkind customer service directly through their official website or the retailer where the product was purchased. Please have your model number (LL1801131) and purchase details ready when contacting support.
