Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Konec produktuview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Klíčové vlastnosti:

• Design s vysokým průtokem vzduchu: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Integrované D-RGB osvětlení: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Předinstalované ventilátory: Includes three high-performance M25-140 D-RGB fans.
• Rozsáhlá podpora chlazení: Supports up to 420mm radiators in the front and 360mm in the top.
• Prostorný interiér: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Flexibilní úložiště: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Moderní přední I/O: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Nastavení a instalace

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Příprava podvozku

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Instalace základní desky

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Instalace jednotky napájecího zdroje (PSU)

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Instalace paměťového zařízení

The case offers extensive storage options:

• 2.5" SSD disky: Up to 9 dedicated 2.5" drive bays are included.
• 3.5" pevné disky: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Instalace grafické karty (GPU)

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Instalace chladicího systému

The chassis supports various fan and radiator configurations:

• Podpora fanoušků:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Horní: 3x 120 mm nebo 3x 140 mm
  • Zadní: 1x 120 mm nebo 1x 140 mm
• Liquid Cooling Radiator Support:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Zadní: 120 mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Správa kabelů

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Instalační videa

3. Návod k obsluze

3.1 Přední vstupní/výstupní panel

Přední I/O panel poskytuje pohodlný přístup k základním portům a ovládacím prvkům:

• Vypínač: Zapnutí/vypnutí systému.
• Porty USB 3.0 (x2): Pro připojení zařízení s rozhraním USB 3.0.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Kombinovaný konektor pro mikrofon/sluchátka: Pro audio vstup a výstup.
• D-RGB Mode Button: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB Color Button: Changes the color of the D-RGB lighting.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 D-RGB Lighting Control

The integrated D-RGB lighting can be controlled in two ways:

• Ruční ovládání: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Synchronizace základní desky: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Údržba

Pravidelná údržba pomáhá zajistit optimální výkon a dlouhou životnost komponent vašeho počítače.

• Filtrace prachu: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Čištění interiéru: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Čištění exteriéru: Vnější povrchy otřete měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.

5. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat u skříně počítače.

5.1 Problémy s napájením

• Systém se nezapíná:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Ověřte, zda je spínač zdroje napájení v poloze „ON“.
  • Check that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Fan Noise or Malfunction

• Nadměrný hluk ventilátoru:
  • Zkontrolujte, zda se na lopatkách ventilátoru nenahromadil prach, a v případě potřeby jej očistěte.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Ventilátor se netočí:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Specifikace

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Záruka a podpora

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks webnebo kontaktujte jejich zákaznický servis.

Kontaktní údaje:

• Webmísto: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., č. 150, Jian 1st Rd., Zhonghe Dist. New Taipei City 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).