1. Úvod
Thank you for choosing the VEVOR 6L Slushie Machine, Model S16-XV1. This manual provides essential information for the proper setup, operation, and maintenance of your machine. Please read it thoroughly before use to ensure safe and efficient performance. This machine is designed for preparing frozen beverages such as slushies, granitas, and frozen cocktails, ideal for various commercial and home settings.
2. Bezpečnostní pokyny
Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění.
- Read all instructions before operating the machine.
- Ujistěte se, že napájecí zdroj odpovídá objtage specified on the machine's rating label (220V).
- Do not immerse the machine's main body, cord, or plug in water or other liquids.
- Keep hands and utensils out of the tank during operation to prevent injury and damage to the machine.
- Unplug the machine from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Neprovozujte žádný spotřebič s poškozenou šňůrou nebo zástrčkou nebo poté, co spotřebič nefunguje správně nebo byl jakýmkoliv způsobem poškozen.
- Používejte pouze příslušenství doporučené výrobcem.
- Tento spotřebič není určen k tomu, aby ho používaly osoby (včetně dětí) se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo nedostatkem zkušeností a znalostí, pokud na ně nebude dohlíženo nebo na ně nebude dohlížet osoba odpovědná za jejich bezpečnost nebo je poučit o používání spotřebiče. .
- Place the machine on a stable, level surface, ensuring adequate ventilation around the unit.
3. Obsah balení
Carefully unpack your VEVOR 6L Slushie Machine and check that all items are present and in good condition. If any items are missing or damaged, please contact VEVOR customer support.
- 1 x VEVOR 6L Slushie Machine
- 1 x Tank Seal
- 2 x Piston Sealing Rings
- 1 x Grease Tube (Special food lubricant)
Obrázek 3.1: Included accessories: a tank seal, two piston sealing rings, and a tube of food-grade lubricant. These are essential for maintaining the machine's seals and moving parts.
4. Konec produktuview a Komponenty
Familiarize yourself with the main parts of your slushie machine for optimal use.
Obrázek 4.1: Key components include the 6L food-grade PC cylinder for holding beverages, two widened stirrers for thorough mixing, and a durable stainless steel body for longevity and hygiene.
Obrázek 4.2: The intelligent control panel features indicator lights, a gear display, a shaping ratio display, buttons for gear adjustment, automatic speed control, gear setting, and a one-touch cleaning function for ease of use.
5. Nastavení
5.1 Umístění
- Choose a stable, level, and dry surface for the machine.
- Ensure there is at least 15 cm (6 inches) of clear space around all sides of the machine for proper ventilation. This is crucial for the efficient operation of the cooling system.
- Neumísťujte stroj do blízkosti zdrojů tepla nebo na přímé sluneční světlo.
5.2 Počáteční čištění
Before first use, thoroughly clean all parts that will come into contact with beverages.
- Remove the lid, cylinder, and stirrers.
- Wash these components with warm, soapy water. Rinse thoroughly and dry completely.
- Otřete vnější povrch hlavní jednotky čisticím prostředkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky.
- Reassemble the machine, ensuring all seals are correctly seated. Apply a small amount of the provided food-grade grease to the piston sealing rings for smooth operation and to prevent leaks.
Obrázek 5.1: The VEVOR 6L Slushie Machine, Model S16-XV1, showcasing its compact design and transparent tank, ready for operation.
6. Návod k obsluze
6.1 Preparing the Beverage Mix
- Prepare your desired slushie mix according to its instructions. Ensure the mix is liquid before pouring it into the machine.
- Do not use pure water, as it may freeze too hard and damage the stirrers or motor. Always use a mix with sugar or a specific slushie concentrate.
6.2 Plnění nádrže
- Ujistěte se, že je stroj zapojen do uzemněné zásuvky.
- Pour the prepared liquid mix into the 6L transparent tank. Do not overfill; leave some space for expansion as the mixture freezes.
- Securely place the lid back on the tank.
6.3 Použití ovládacího panelu
The intelligent control panel allows for easy operation:
- Zapnutí/vypnutí: Press the power button to turn the machine on or off.
- Automatic Speed Control (Auto/+): Press the 'Auto/+' button to activate automatic operation. The machine will automatically adjust stirring and cooling to achieve the desired slushie consistency.
- Seřízení převodovky: Use the gear adjustment buttons (often labeled with arrows or '+' / '-') to fine-tune the consistency of the slushie. A higher gear setting typically results in a firmer slushie. The current gear and shaping ratio will be displayed on the digital screens.
- Tlačítko nastavení: This button may be used to confirm settings or cycle through different modes, depending on the specific model's programming.
- One-Touch Cleaning (Clean/-): Press the 'Clean/-' button to initiate the automatic cleaning cycle. Refer to the Maintenance section for detailed cleaning instructions.
6.4 Výdej
Once the slushie has reached the desired consistency (typically 35-60 minutes depending on ambient temperature and mix), you can dispense it.
- Umístěte šálek pod dávkovací hubici.
- Pull the rebound handle towards you to release the slushie.
- Release the handle to stop dispensing.
Obrázek 6.1: Features designed for user comfort and smoother operation, including a detachable drip tray, 360-degree automatic cleaning, a large heat-dissipating plate, non-slip rubber feet, and an ergonomic rebound handle.
7. Údržba
Regular cleaning and maintenance will extend the life of your slushie machine and ensure hygienic operation.
7.1 Denní čištění
- Vyprázdněte nádrž: After each use, or at the end of the day, empty any remaining beverage mix from the tank.
- Automatické čištění: Fill the tank with clean water (do not use hot water). Press the 'Clean/-' button on the control panel to activate the automatic cleaning cycle. Allow it to run for a few minutes.
- Sceďte a opláchněte: Drain the cleaning water through the dispensing spout. Repeat with fresh water if necessary until the water runs clear.
- Ruční čištění: For a more thorough clean, disassemble the tank, lid, stirrers, and dispensing spout components. Wash them with warm, soapy water, rinse thoroughly, and dry completely before reassembly.
- Čistá odkapávací miska: Remove and empty the detachable drip tray. Wash it with soap and water, then dry and reattach.
7.2 Pravidelná údržba
- Mazání: Periodically apply the provided food-grade grease to the piston sealing rings and any other moving parts of the dispensing mechanism to ensure smooth operation and prevent wear.
- Kontrola těsnění: Regularly inspect the tank seal and piston sealing rings for any signs of wear or damage. Replace them if necessary to prevent leaks.
- Ventilační mřížky: Ensure the large heat-dissipating plate and ventilation grills on the sides of the machine are free from dust and debris to maintain efficient cooling. Use a soft brush or vacuum cleaner to clean them.
8. Řešení problémů
If you encounter issues with your slushie machine, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stroj se nezapne | No power supply; Power cord not properly connected; Fuse blown. | Check power outlet; Ensure cord is securely plugged in; Check household fuse/circuit breaker. |
| Slushie is not freezing or takes too long | Insufficient cooling due to poor ventilation; Ambient temperature too high; Mix ratio incorrect (too much sugar); Machine overloaded; Compressor issue. | Ensure adequate space around the machine for ventilation; Operate in a cooler environment; Adjust mix ratio (less sugar); Do not overfill; Contact support if compressor suspected. |
| Slushie is too hard/icy | Mix ratio incorrect (not enough sugar); Gear setting too high. | Adjust mix ratio (more sugar); Lower the gear setting on the control panel. |
| Leaking from the tank or spout | Tank seal or piston sealing rings are worn, damaged, or improperly installed; Components not fully tightened. | Inspect and properly seat all seals; Replace worn seals; Ensure all components are securely assembled. Apply food-grade grease to piston seals. |
| Neobvyklý hluk během provozu | Machine not on a level surface; Internal component issue; Fan obstruction. | Ensure machine is on a stable, level surface; Check for any obstructions in the fan area; Contact support if noise persists. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte prosím zákaznickou podporu VEVOR.
9. Specifikace
Detailed technical specifications for the VEVOR 6L Slushie Machine (Model S16-XV1).
| Funkce | Specifikace |
|---|---|
| Model | S16-XV1 |
| Kapacita | 6 l (1.6 galonu) |
| Materiál těla | Nerez |
| Materiál válce | Food-Grade PC |
| Moc | 300 W |
| svtage | 220 V |
| Rozměry produktu (D x Š x V) | 7.5 x 18.5 x 23.6 palce (19 x 47 x 60 cm) |
| Hmotnost produktu | 33.1 lb (15 kg) |
Obrázek 9.1: Product dimensions for the VEVOR 6L Slushie Machine, indicating its compact footprint suitable for various settings.
10. Záruka a podpora
VEVOR is committed to providing quality products and attentive customer support. While specific warranty details may vary by region and purchase date, VEVOR generally offers dedicated customer service to assist with product inquiries, troubleshooting, and parts replacement.
For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official VEVOR website. VEVOR aims to provide 24/7 support for its customers.
Můžete také navštívit Značkový obchod VEVOR for more information on VEVOR products and support.
