1. Bezpečnostní informace
- Před instalací nebo údržbou vždy odpojte napájení.
- Zajistěte napájení objtage (AC100-277V) matches the product's requirements.
- Installation should be performed by a qualified electrician if hardwiring is required.
- Do not look directly into the LED light source when it is illuminated to avoid eye strain.
- Uchovávejte mimo dosah hořlavých materiálů.
- Ensure proper grounding for safe operation.
2. Obsah balení
Verify all components are present before installation:
- 4 x 240W LED UFO High Bay Light units
- 1 x Návod k použití
- 4 x US Hooks
- 4 x Safety Ropes
Image: Four 240W UFO LED High Bay Lights with included accessories in their packaging.
3. Specifikace
| Wattage | 240W |
| Světelný tok | 36,000 LM |
| Světelná účinnost | 150 LM / W |
| Teplota barev | 5000K denní světlo |
| Úhel paprsku | 120° |
| svtage | AC100-277V |
| Stmívání | 0-10V Dimmable (dimmer switch not included) |
| Životnost | Až 50,000 hodin |
| Materiál | ADC12 Die-cast Aluminum Housing |
| Hodnocení voděodolnosti | IP65 |
| Úroveň ochrany | IK08 |
| Rozměry | 13.38 cm D x 13.38 cm Š x 6.65 cm V |
Image: Illustration of the 3 selectable wattage options (150W, 200W, 240W) and corresponding lumen outputs.
Image: Diagram highlighting the efficient heat dissipation features including die-casting aluminum heatsink and hollow out heatsink design.
4. Pokyny k instalaci
The JC-LGL UFO LED High Bay Light is designed for easy installation. Follow these steps for safe and effective setup.
4.1 Hanging Installation (Plug and Play)
- Identify a suitable mounting point on the ceiling or beam that can safely support the weight of the light fixture.
- Screw the provided US Hook into the designated hole on top of the light fixture. Ensure it is securely tightened.
- Attach the safety rope to the fixture and a secure point on the ceiling/beam as an additional safety measure.
- Hang the light fixture from the pre-installed mounting point using the hook.
- Plug the 6-foot power cord into a standard American 3-prong switched outlet.
Image: Components for plug and play installation including the 6-foot power cord, US hook, and safety cable.
4.2 Pevná instalace
For hardwired installations, it is recommended to consult a qualified electrician.
- Disconnect power at the circuit breaker before beginning any wiring.
- Cut off the 3-prong plug from the power cord.
- Connect the light's wires to your building's electrical system (AC100-277V) according to local electrical codes. Ensure proper grounding.
- Secure the fixture using the hanging method described above.
4.3 0-10V Dimming Connection
The light supports 0-10V dimming. A compatible 0-10V dimmer switch (not included) is required.
- Locate the purple and grey dimming wires extending from the fixture.
- Connect the purple wire to the positive (+) dimming control wire of your dimmer switch.
- Connect the grey wire to the negative (-) dimming control wire of your dimmer switch.
- Ujistěte se, že všechny spoje jsou bezpečné a izolované.
4.4 Instalační videa
Video: JC-LGL Dimmable UFO LED High Bay Light. This video provides an overview o vlastnostech produktu a procesu instalace.
Video: JC-LGL easy to install and super bright high bay lighting. This video demonstrates the ease of installation and the brightness of the light.
5. Návod k obsluze
- Zapnutí/vypnutí: If connected to a switched outlet, use the wall switch to turn the light on or off.
- Stmívání: If a compatible 0-10V dimmer switch is installed, use the dimmer control to adjust the light output from 0% to 100%.
- Volitelný Wattage: The light features 3 selectable wattage options. Refer to the product label or specific instructions for how to adjust this setting if available on your model.
6. Údržba
- Čištění: Ensure the light is off and cool before cleaning. Use a soft, damp hadříkem k otření povrchu. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Inspekce: Periodically check the hanging hardware and electrical connections for any signs of wear or damage. Tighten any loose connections.
- No user-serviceable parts inside. Do not attempt to open or repair the fixture.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí | Žádné napájení; Volné připojení; Vadný spínač | Check power source and circuit breaker; Verify all electrical connections are secure; Test the switch. |
| Světlo bliká | Unstable power; Loose wiring; Incompatible dimmer | Ensure stable power supply; Check all wiring connections; Use a compatible 0-10V dimmer. |
| Stmívání nefunguje | Incorrect dimmer wiring; Incompatible dimmer; No dimmer installed | Verify dimming wire connections (purple/grey); Ensure dimmer is 0-10V compatible; Install a compatible dimmer. |
8. Aplikace
The JC-LGL UFO LED High Bay Light is suitable for a wide range of indoor commercial and industrial applications:
- Sklady
- Továrny
- Workshopy
- Stodoly
- Gymnázia
- Obchody
- Garáže
Obrázek: Přamples of wide applications including warehouses, factories, gymnasiums, barns, garages, and workshops.
9. Záruka a podpora
This JC-LGL UFO LED High Bay Light comes with a 5-letá záruka. Each bay lighting fixture has been tested to function 100% effectively.
For any issues relating to the product, please do not hesitate to contact our professional support team. High quality standards and friendly customer service are our priority.
Contact information can typically be found on the product packaging or the official JC-LGL webmísto.
