Evenflo Revolve360 Extend Convertible Car Seat User Manual

Konec produktuview

The Evenflo Revolve360 Extend Rotational All-in-1 Convertible Car Seat is designed to provide safe and adaptable transportation for children as they grow. This car seat supports extended rear-facing up to 50 pounds, transitions to forward-facing for toddlers, and then to a high-back booster seat. Its key feature is the effortless 360-degree rotation, simplifying child placement and removal. The Sure360 Safety Installation System ensures secure installation in both rear and forward-facing modes.

Figure 1: The Evenflo Revolve360 Extend Car Seat, showcasing its rotational capability for easy access.

Bezpečnostní informace

Always read and follow all instructions and warnings provided in the complete user manual. Proper installation and use are critical for child safety. This car seat is designed to meet or exceed all applicable safety standards.

• Extended Rear-Facing: Recommended for children 4 to 50 pounds. Child safety experts advise keeping children rear-facing for as long as possible.
• Směrem dopředu: Suitable for children 22 to 65 pounds.
• Booster Mode: For children 40 to 120 pounds.
• Ensure the car seat is securely installed using the Sure360 Safety Installation System, including LockStrong and Tether360 technologies.
• Always properly secure your child in the 5-point harness system.

Figure 2: The three adaptable modes of the Revolve360 Extend car seat, accommodating children from 4 to 120 pounds.

Nastavení a instalace

The Evenflo Revolve360 Extend features the Sure360 Safety Installation System for straightforward and secure installation.

1. Připravte vozidlo: Ensure the vehicle seat is clear of debris.
2. Umístěte základnu: Umístěte základnu autosedačky na sedadlo vozidla.
3. Engage LockStrong: Utilize the LockStrong arm to achieve a tight and secure fit with the vehicle's LATCH system or seat belt.
4. Attach Tether360: Connect the Tether360 strap to the vehicle's tether anchor point, if applicable for the installation mode.
5. Ověřte instalaci: Check for movement at the belt path. The car seat should not move more than 1 inch side-to-side or front-to-back.
6. Attach Car Seat to Base: Align the car seat with the base and firmly press down until it clicks securely into place.

Figure 3: Demonstrating the ease of placing a child into the car seat, facilitated by its rotational feature.

Návod k obsluze

360stupňová rotace

The car seat features a 360-degree rotation mechanism, allowing you to easily turn the seat towards the car door for convenient loading and unloading of your child. This feature is accessible in all modes (rear-facing, forward-facing, and booster).

• To rotate, locate the rotation release lever (refer to the full manual for exact location).
• Press the lever and gently rotate the car seat to the desired position.
• Ensure the seat locks securely into place before driving.

Figure 4: The car seat's 360-degree rotation, operable with one hand for convenience.

Adjusting Modes and Harness

The Revolve360 Extend adapts to your child's growth through three distinct modes:

• Směrem dozadu: For infants and toddlers weighing 4 to 50 pounds.
• Směrem dopředu: For toddlers and preschoolers weighing 22 to 65 pounds.
• Booster Mode: For older children weighing 40 to 120 pounds.

The harness system is a 5-point harness, adjustable to ensure a snug and secure fit for your child in rear-facing and forward-facing modes. Refer to the complete manual for detailed instructions on harness height adjustment and crotch buckle positioning.

Figure 5: The car seat in booster mode, providing comfort and safety for older children.

Údržba a péče

Regular maintenance ensures the longevity and safety of your car seat. Follow these guidelines for cleaning:

• Generální úklid: DO NOT lubricate or immerse in water any part of this child restraint, unless rinsing is permitted. Plastic and metal parts may be wiped clean with mild soap and water and dried with a soft cloth.
• Harness Cleaning: The harness can be wiped clean with mild soap and water. Allow harness to air dry.
• Čištění sedáku: Machine wash the seat pad separately in cold water, delicate cycle. Tumble dry 10 to 15 minutes on low heat.

Figure 6: The convenient zip-on leg rest cover, simplifying removal for cleaning.

Odstraňování problémů

If you encounter issues with your Evenflo Revolve360 Extend car seat, refer to the following common solutions:

For further assistance, consult the complete user manual or contact Evenflo customer support.

Specifikace

Figure 7: Key dimensions of the Evenflo Revolve360 Extend car seat.

Záruka a podpora

For detailed warranty information, please refer to the warranty card included with your product or visit the official Evenflo website. Evenflo provides customer support for product inquiries, technical assistance, and warranty claims.

• Online podpora: Visit the Evenflo website for FAQs, product registration, and digital manuals.
• Telefonická podpora: Contact Evenflo customer service during business hours for direct assistance.