Vylepšený bezdrátový ovladač PowerA s technologií Lumectra pro Nintendo Switch - Uživatelská příručka

Zavedení

This manual provides comprehensive instructions for the PowerA Enhanced Wireless Controller with Lumectra, designed for use with Nintendo Switch and Switch 2 consoles. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

Klíčové vlastnosti

• Multi-Zone RGB Lighting: Customize your controller with 24 different colors, 4 individual lighting zones, and 3 distinct lighting modes (Breathing, Solid, Cycle) for thousands of unique combinations.
• Pokročilá herní tlačítka: Two mappable buttons located on the back of the controller allow for on-the-fly programming, providing a competitive edge without needing to access system settings.
• Dobíjecí baterie: An internal rechargeable battery offers up to 20 hours of gameplay on a single charge. An extra-long 10 ft. USB-C cable is included for convenient charging while playing.
• Bezdrátová svoboda: Enjoy seamless wireless gameplay with Nintendo Switch – OLED Model, Nintendo Switch, and Nintendo Switch Lite.
• Immersive Motion Controls: Experience fluid and responsive motion controls, enhancing gameplay for titles that support aiming, steering, and flying.
• Ergonomický design: Engineered for comfort during extended gaming sessions, featuring super-comfortable ergonomics and a textured grip.

Nastavení

Spárování ovladače

1. Ujistěte se, že je vaše konzole Nintendo Switch zapnutá a aktualizovaná na nejnovější systémový software.
2. V nabídce HOME vyberte „Ovladače“ > „Změnit úchop/pořadí“.
3. On the PowerA Enhanced Wireless Controller, press and hold the SYNC Button (located on the top edge of the controller, near the USB-C port) for at least three seconds. The player indicator LEDs will begin to flash.
4. Once paired, the player indicator LED(s) corresponding to the controller number will remain lit.
5. If pairing fails, ensure the controller is charged and try again.

Počáteční nabití

Before first use, fully charge the controller using the included USB-C cable. Connect the USB-C end to the controller and the USB-A end to a powered USB port (e.g., Nintendo Switch dock, USB wall adapter). The charging indicator LED will show charging status.

Návod k obsluze

Základní ovládací prvky

The controller features a standard Nintendo Switch button layout, including A, B, X, Y buttons, a D-pad, Left and Right Analog Sticks, L/R/ZL/ZR shoulder buttons, HOME, Capture, Plus (+), and Minus (-) buttons. Additionally, it includes two mappable Advanced Gaming Buttons (AGL/AGR) on the back.

Customizing RGB Lighting (Lumectra)

The Lumectra RGB lighting system allows for extensive customization:

• Změna barev: To change the color of a specific lighting zone, press and hold the dedicated Lumectra button (refer to your controller's specific layout for its location, often on the back or bottom). While holding, press the button associated with the zone you wish to customize (e.g., A, B, X, Y, D-pad, or analog stick) to cycle through available colors.
• Režimy osvětlení: The controller supports three dynamic lighting modes: Breathing (fading in and out), Solid (constant color), and Cycle (automatically rotating through colors). Consult the detailed instructions provided with your controller for the specific button combinations required to switch between these modes.
• Individual Zone Customization: The controller is equipped with 4 individual lighting zones, allowing you to customize each zone independently for a personalized aesthetic.

Programování pokročilých herních tlačítek

The two Advanced Gaming Buttons (AGL and AGR) on the back of the controller can be programmed to replicate other button inputs on the fly:

1. Press and hold the Program Button (typically a small button on the back of the controller). The Program LED will begin to flash.
2. Press the Advanced Gaming Button (AGL or AGR) you wish to program. The Program LED will start flashing rapidly.
3. Press the standard button you want to map to the Advanced Gaming Button (e.g., A, B, X, Y, L, R, ZL, ZR, D-pad directions, or analog stick clicks). The Program LED will flash three times to indicate successful programming.
4. To clear a programmed button, repeat steps 1 and 2, then press the Program Button again.

Údržba

Nabíjení baterie

The controller is equipped with an internal rechargeable battery. To charge, connect the included USB-C cable to the controller's USB-C port and the other end to a powered USB source. The charging indicator LED will illuminate while charging and turn off once fully charged. A complete charge typically takes approximately 20-30 minutes, providing up to 20 hours of gameplay. Actual battery life may vary based on usage patterns and RGB lighting settings.

Čištění

To clean the controller, use a soft, dry cloth. Avoid using harsh chemicals, solvents, or abrasive cleaning materials, as these can damage the controller's finish and internal components.

Skladování

Store the controller in a cool, dry environment, away from direct sunlight, extreme temperatures, and excessive humidity. Proper storage helps prolong the lifespan of the device.

Odstraňování problémů

Ovladač se nepřipojuje/nepáruje

• Ujistěte se, že je ovladač plně nabitý.
• Verify that your Nintendo Switch console is updated to the latest system software version.
• Re-attempt the pairing process as detailed in the "Setup" section.
• Check for potential wireless interference from other electronic devices in the vicinity.

Osvětlení RGB nefunguje

• Confirm that the controller is powered on.
• Review the "Customizing RGB Lighting" section for the correct button combinations to activate and modify lighting effects.
• If the issue persists, consider performing a controller reset (refer to the full product manual for specific reset instructions, if available).

Krátká životnost baterie

• Battery life can vary significantly based on usage intensity, especially when RGB lighting is active.
• Always ensure the controller is fully charged before each use.
• To conserve battery, reduce RGB brightness or disable lighting effects when not desired.

Motion Controls Not Responding

• Verify that the game you are playing supports motion controls.
• Re-pair the controller with your Nintendo Switch console.
• If necessary, calibrate motion controls through the Nintendo Switch system settings.

Specifikace

Záruka a podpora

PowerA products are engineered for quality and reliable performance. For detailed warranty information, technical support, or to register your product, please visit the official PowerA website or contact their customer service department. It is recommended to retain your proof of purchase for any warranty claims.

Visit PowerA Support