NEDIS BSCN1D100BK 1D Laser Barcode Scanner

1. Úvod

This manual provides essential information for the proper setup, operation, and maintenance of your NEDIS BSCN1D100BK 1D Laser Barcode Scanner. Please read these instructions carefully before using the device to ensure optimal performance and safety.

The NEDIS BSCN1D100BK is a high-performance 1D laser barcode scanner designed for efficient data capture. It features advanced laser technology, enabling reliable scanning even in challenging lighting conditions. With a scanning speed of up to 100 scans per second, it offers quick and accurate barcode recognition. The scanner is compatible with major operating systems, including Windows, Mac OS, and Android, ensuring broad usability.

Obrázek 1.1: Boční strana view of the NEDIS BSCN1D100BK 1D Laser Barcode Scanner, showing its ergonomic design and trigger button.

2. Nastavení

Chcete-li nastavit skener čárových kódů, postupujte takto:

1. Rozbalte zařízení: Carefully remove the scanner and its USB cable from the packaging.
2. Připojte kabel USB: Insert the smaller end of the USB cable into the port at the base of the scanner. Connect the standard USB-A end of the cable to an available USB port on your computer or compatible device.
3. Rozpoznávání systému: Your operating system (Windows, Mac OS, or Android) should automatically detect and install the necessary drivers for the scanner. This process may take a few moments.
4. Otestujte skener: Open a text editor or a compatible application on your device. Point the scanner at a 1D barcode and press the trigger button. The barcode data should appear in your application.

Image 2.1: The NEDIS BSCN1D100BK barcode scanner shown alongside its detachable USB connection cable.

3. Návod k obsluze

The NEDIS BSCN1D100BK scanner is designed for straightforward operation:

1. Zapnutí: The scanner powers on automatically when connected to a USB port.
2. Skenování čárového kódu: Hold the scanner with the laser window facing the barcode. Ensure the barcode is within the scanner's field of view.
3. Activate Scan: Press and hold the trigger button. A red laser line will emit from the scanner.
4. Potvrzení skenování: Position the laser line across the entire barcode. A successful scan is typically indicated by an audible beep and/or a visual indicator (e.g., a green light). The scanned data will be transmitted to your connected device.
5. Rychlost skenování: The scanner can process up to 100 scans per second, allowing for rapid data entry.

Image 3.1: A hand demonstrating the proper grip for operating the NEDIS BSCN1D100BK barcode scanner.

4. Údržba

Správná údržba zajišťuje dlouhou životnost a výkon vašeho skeneru:

• Čištění: Use a soft, dry, lint-free cloth to clean the scanner's exterior. For the laser window, use a lens cleaning cloth and a mild, non-abrasive cleaning solution if necessary. Avoid harsh chemicals or abrasive materials.
• Skladování: Store the scanner in a clean, dry environment away from extreme temperatures, direct sunlight, and excessive dust.
• Péče o kabely: Neohýbejte ani nekruťte kabel USB nadměrně, mohlo by dojít k poškození vnitřních vodičů.

Bezpečnostní upozornění:

Obrázek 4.1: Nahoře view of the scanner, highlighting the laser diode and the caution label: "LASER LIGHT DO NOT STARE INTO BEAM".

This device uses a 650nm laser diode. CAUTION: LASER LIGHT. DO NOT STARE INTO BEAM. Direct exposure to the laser beam may cause eye injury. Do not attempt to open or modify the scanner, as this may expose you to hazardous laser radiation and will void the warranty.

5. Řešení problémů

If you encounter issues with your scanner, refer to the following common troubleshooting steps:

• Skener nereaguje:
  • Ujistěte se, že je kabel USB bezpečně připojen ke skeneru i hostitelskému zařízení.
  • Try connecting the scanner to a different USB port on your device.
  • Restartujte počítač nebo hostitelské zařízení.
• No Data Output After Scanning:
  • Verify that the application you are using (e.g., text editor, POS software) is active and ready to receive input.
  • Ujistěte se, že čárový kód je čistý, nepoškozený a jasně viditelný.
  • Check the distance and angle between the scanner and the barcode. Try adjusting your position.
  • Confirm the scanner emits a laser line when the trigger is pressed. If not, check connections.
• Incorrect Data Scanned:
  • Ensure you are scanning a 1D barcode. This scanner is not designed for 2D barcodes (like QR codes).
  • The barcode might be damaged or poorly printed. Try scanning a different, known good barcode.
• Scanner Beeps Continuously or Emits Error Tone:
  • This may indicate a configuration error or a hardware issue. Disconnect and reconnect the scanner.
  • Poraďte se s výrobcem website for specific error code meanings if applicable.

Pokud tyto kroky problém nevyřeší, obraťte se na zákaznickou podporu s žádostí o další pomoc.

6. Specifikace

7. Záruka a podpora

Specific warranty information for the NEDIS BSCN1D100BK is not provided in this document. Please refer to the warranty card included with your product or visit the official NEDIS webpodrobné záruční podmínky naleznete na webu.

For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding spare parts, please contact NEDIS customer service. Contact information can typically be found on the product packaging or the official NEDIS webweb (www.nedis.com).