KOSUMOSU 3D LED Digital Wall Clock

Zavedení

This user manual provides comprehensive instructions for the KOSUMOSU 9.7-inch 3D LED Digital Wall Clock. It covers product features, setup procedures, operational guidelines, maintenance tips, troubleshooting solutions, and detailed specifications. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Image: The KOSUMOSU 3D LED Digital Wall Clock displaying "88:88" with its remote control positioned in front.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• KOSUMOSU 9.7-inch 3D LED Digital Wall Clock
• Remote Control (with CR2025 button battery pre-installed)
• 3-meter USB Power Cable
• Stolní držák
• Wall Mounting Accessories (screws, anchors)
• Uživatelská příručka

Note: A 5V/1A USB-A power adapter is NOT included and is required for operation.

Image: A flat lay of the product packaging, including the 3D LED clock, remote control, USB cable, desktop stand, and mounting hardware.

Vlastnosti produktu

• Velký 9.7palcový LED displej: Clear and easy-to-read digital time, date, and temperature.
• Všestranné umístění: Can be used as a wall clock or a desktop/table clock with the included stand.
• Nastavitelný jas: Features 3 levels of manual dimming (High/Medium/Low) via remote control.
• Automatické stmívání: Built-in light sensor provides 8 levels of automatic brightness adjustment based on ambient light.
• Multifunkční displej: Loops between time, date, and temperature (Celsius/Fahrenheit).
• Budík s funkcí odložení: Easy-to-set alarm with a 5-minute snooze function (up to 3 times).
• Obsluha dálkového ovládání: All settings are conveniently adjusted using the included remote.
• Časová paměť: Built-in super farad capacitor provides approximately 2 hours of time memory during power outages (not for continuous power supply).

Image: The clock displayed in a living room as a wall clock and on a desk, illustrating its versatility for day and night use.

Image: The clock demonstrating its loop display feature, cycling between current time, date (September 5th), and temperature (59°F).

Nastavení

1. Připojení napájení: Connect the provided USB power cable to the clock's power input port. Plug the other end into a 5V/1A USB-A power adapter (not included) and then into a wall outlet. The clock will power on and display the time.
2. Baterie dálkového ovládání: The remote control comes with a pre-installed CR2025 button battery. Ensure the transparent insulation sheet is removed from the battery compartment before first use.
3. Umístění:
   • Použití počítače: Attach the included desktop bracket to the bottom of the clock for stable placement on a table or desk.
   • Montáž na stěnu: Use the integrated hanging holes on the back of the clock. Mark the desired position on the wall, drill holes, insert anchors, and secure with screws. Hang the clock securely.

Image: A remote control being aimed at the infrared sensor located at the bottom of the clock, indicating the correct way to operate the remote.

Obrázek: Zadní strana view of the clock, highlighting the three function buttons (minus, plus, set) and the keyhole slots for wall mounting.

Návod k obsluze

Nastavení času a data

• Stiskněte tlačítko HODINY tlačítko na dálkovém ovladači.
• Použijte NAHORU (▲) a DOLŮ (▼) šipkami upravte hodinu.
• Stiskněte tlačítko RIGHT (▶) arrow button to move to minutes, then use NAHORU (▲) a DOLŮ (▼) upravit.
• Pokračujte v stisknutí RIGHT (▶) procházet nastavení roku, měsíce a dne a upravovat každé z nich pomocí NAHORU (▲) a DOLŮ (▼).
• Stiskněte HODINY again to save settings and exit.

Adjusting Brightness (Manual & Automatic)

• Manuální stmívání: Stiskněte tlačítko JASNÝ button on the remote control to cycle through 3 levels: High, Medium, Low.
• Automatické stmívání: The clock has a built-in light sensor. It will automatically adjust brightness across 8 levels based on ambient light. This feature is always active.

Image: The clock displaying different brightness levels (Auto, Low, Medium, High) and highlighting the light sensor for automatic dimming.

Setting Alarm & Snooze

• Stiskněte tlačítko POPLACH tlačítko na dálkovém ovladači.
• Použijte NAHORU (▲) a DOLŮ (▼) arrow buttons to set the desired alarm hour.
• Stiskněte tlačítko RIGHT (▶) arrow button to move to minutes, then adjust with NAHORU (▲) a DOLŮ (▼).
• Stiskněte POPLACH again to activate the alarm. The alarm icon will appear on the display.
• When the alarm rings, press any button on the remote (except Power) to activate the 5-minute snooze function. The alarm will ring for 1 minute and can be snoozed up to 3 times.
• Chcete-li budík vypnout, stiskněte tlačítko POPLACH tlačítko, dokud ikona budíku nezmizí.

Temperature Display & Unit Change

• Krátce stiskněte LEFT (◀) arrow button on the remote control to cycle the display between Date, Time, and Temperature.
• While the temperature is displayed, press the TEPL tlačítko pro přepínání mezi stupni Celsia (℃) a Fahrenheita (℉).

12/24 Hour Format Toggle

• Krátce stiskněte NAHORU (▲) arrow button on the remote control to switch between 12-hour (with AM/PM indicator) and 24-hour formats.

Údržba

• Čištění: K čištění povrchu hodin používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Výměna baterie v dálkovém ovládání: If the remote control's functionality diminishes, replace the CR2025 button battery. Open the battery compartment on the back of the remote, remove the old battery, and insert a new one with the correct polarity.
• Skladování: If storing the clock for an extended period, disconnect it from power.

Image: An illustration showing the remote control and the CR2025 button battery used for its operation.

Image: A warning label indicating the ingestion hazard of button or coin batteries, advising to keep them out of reach of children and seek immediate medical attention if swallowed.

Odstraňování problémů

If you encounter issues with your KOSUMOSU 3D LED Digital Wall Clock, refer to the following common problems and solutions:

Q: Does it run with a built-in battery?

A: No, this LED clock requires a 5V/1A plug-in USB-A adapter (NOT included) to run. It is NOT a wireless clock.

Q: Why does it freeze, flicker, or hum during use or when changing brightness?

A: An unstable or incompatible power adapter cannot provide enough current and support normal working. Please try to replace it with a regular, compliant 5V/1A adapter made by professional, legitimate manufacturers.

Q: The remote control does not work, how to fix?

A:

1. Please remove the transparent battery insulation sheet from the bottom of the remote control.
2. When operating the remote control, please aim at the infrared sensor on the bottom of the clock and avoid other obstructions that may affect infrared reception. Note: The effective distance is within about 3.5 meters.

Q: How do I stop the time separator from blinking?

A: Just press the RIGHT (▶) arrow button on the remote control to have the time separator stop or flash.

Q: Why did the alarm not ring at the set time?

A: Please check the alarm time setting and time format setting (12h / 24h format). For 12h format: am12 o'clock ~ pm11 o'clock / For 24h format: 0 o'clock ~ 23 o'clock.

Specifikace

Záruka a podpora

KOSUMOSU provides a 2-letá záruka for this product. This warranty covers manufacturing defects and issues arising from normal use.

If you experience any quality or usage problems with your KOSUMOSU 3D LED Digital Wall Clock, or if you require further assistance beyond the troubleshooting guide, please contact KOSUMOSU customer service directly. You can send a message via Amazon mail (chat box). Upon receiving your message, KOSUMOSU will promptly assist in solving the problem and providing solutions.

For additional resources, you may refer to the official KOSUMOSU store on Amazon: KOSUMOSU Technology Store.