1. Úvod
This manual provides comprehensive instructions for the proper installation, usage, and maintenance of the ARREGUI Safe Support, model P180070. This support is designed to elevate compatible ARREGUI Plus C safes, enhancing accessibility and ensuring stable placement. Please read these instructions carefully before installation to ensure correct setup and optimal performance.
2. Konec produktuview
The ARREGUI Safe Support P180070 is a robust base designed to integrate seamlessly with specific ARREGUI Plus C safe models. Its primary function is to raise the safe to a more convenient height for user access and to provide a stable foundation.
2.1 Klíčové vlastnosti
- Elevated Positioning: Raises the safe to a comfortable height for easier access.
- Předvrtané otvory: Includes pre-drilled holes for secure attachment of the safe to the support.
- Stabilní základna: Equipped with feet to ensure the stability of the safe.
- Odpovídající design: Features a black finish, consistent with ARREGUI Plus C safes.
2.2 Kompatibilita
This support is exclusively compatible with the following ARREGUI Plus C safe models:
- ARREGUI Plus C 180040
- ARREGUI Plus C 180050
- ARREGUI Plus C 180070
- ARREGUI Plus C 180140
- ARREGUI Plus C 180150
- ARREGUI Plus C 180170
- ARREGUI Plus C 180340
- ARREGUI Plus C 180350
- ARREGUI Plus C 180370
Figure 1: The ARREGUI Safe Support P180070. This image displays the black metal base with its structural design and pre-drilled holes for safe attachment.
3. Nastavení a instalace
Follow these steps to correctly install your ARREGUI Safe Support P180070 and secure your compatible ARREGUI Plus C safe.
- Rozbalte komponenty: Carefully remove the safe support from its packaging. Inspect for any damage.
- Vyberte umístění: Select a flat, stable, and level surface for the safe and its support. Ensure the chosen location can bear the combined weight of the safe, its contents, and the support.
- Umístění podpěry: Place the ARREGUI Safe Support P180070 in the desired location.
- Umístěte trezor: Carefully lift your compatible ARREGUI Plus C safe and align its base with the top surface of the support. Ensure the safe's pre-drilled holes align with the corresponding holes on the support.
- Zabezpečení trezoru: Using appropriate fasteners (not included, typically supplied with the safe or purchased separately), secure the safe to the support through the aligned holes. Tighten all fasteners firmly but do not overtighten.
- Ověřte stabilitu: Gently test the stability of the assembled safe and support. It should not wobble or shift. If instability is detected, re-check the alignment and tightness of fasteners, and ensure the floor surface is level.
Důležité: Always ensure the safe is empty before attempting to lift or move it. Seek assistance if the safe is too heavy to handle safely.
4. Použití a provoz
Once installed, the ARREGUI Safe Support P180070 operates passively by providing an elevated and stable platform for your safe. No active operation is required from the support itself.
- Přístupnost: The elevated position allows for easier access to the safe's contents without excessive bending.
- Stabilita: The support's design, combined with proper installation, ensures the safe remains stable during opening, closing, and access.
5. Údržba
The ARREGUI Safe Support P180070 requires minimal maintenance to ensure its longevity and continued performance.
- Čištění: Otřete podpěru měkkým hadříkemamp hadříkem odstraňte prach a nečistoty. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
- Pravidelná prohlídka: Periodically check the fasteners connecting the safe to the support to ensure they remain tight. Re-tighten if necessary.
- Kontrola stability: Occasionally verify the overall stability of the safe and support assembly.
6. Řešení problémů
If you encounter issues with the stability or placement of your safe on the support, refer to the following:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Safe wobbles or is unstable. |
|
|
| Difficulty aligning safe with support holes. |
|
|
7. Specifikace
| Atribut | Detail |
|---|---|
| Značka | ARREGUI |
| Číslo modelu | P180070 |
| Rozměry produktu (D x Š x V) | 37.5 x 35.5 x 10 cm |
| Barva | Černý |
| Typ upevnění | Floor mounting (for safe to support) |
| Compatible Safe Models | ARREGUI Plus C 180040, 180050, 180070, 180140, 180150, 180170, 180340, 180350, 180370 |
8. Záruka a podpora
Information regarding the specific warranty terms for the ARREGUI Safe Support P180070 is not available in this document. For warranty details, technical support, or further assistance, please contact ARREGUI customer service directly or refer to the official ARREGUI webmísto.
