SILCA Sicuro Titanium Water Bottle Cage (V2, SI/160877)

Návod k obsluze košíku na láhev SILCA Sicuro Titanium

Značka: SILCA | Model: Sicuro Titanium Water Bottle Cage (V2, SI/160877)

Zavedení

This manual provides essential information for the proper installation, operation, and maintenance of your SILCA Sicuro Titanium Water Bottle Cage. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

Konec produktuview

The SILCA Sicuro Titanium Water Bottle Cage is a lightweight and durable accessory designed for secure bottle retention on bicycles. Crafted from titanium, it offers a balance of strength and minimal weight, featuring a 21mm fore/aft adjustment for precise positioning.

SILCA Sicuro Titanium Water Bottle Cage, front view

Obrázek 1: Přední view of the SILCA Sicuro Titanium Water Bottle Cage, showcasing its design and rainbow finish.

SILCA Sicuro Titanium Water Bottle Cage, side view

Obrázek 2: Strana view of the SILCA Sicuro Titanium Water Bottle Cage, highlighting its profile and construction.

Nastavení a instalace

  1. Příprava montážních bodů: Locate the two threaded inserts on your bicycle frame, typically on the down tube or seat tube. Ensure these are clean and free of debris.
  2. Umístění klece: Align the mounting slots on the SILCA Sicuro cage with the threaded inserts on your frame. The cage features 21mm of fore/aft adjustment, allowing you to slide it up or down to your preferred position.
  3. Zajištění šrouby: Insert two appropriate M5 bolts (not included with the cage) through the cage's mounting slots and into the frame's threaded inserts.
  4. Utažení šroubů: Using an appropriate hex key, tighten the bolts evenly until the cage is secure. Do not overtighten, as this can damage the frame or the cage. Ensure the cage does not rotate or move when firm pressure is applied.
  5. Test Fit Bottle: Insert a water bottle into the cage to confirm a secure fit and proper clearance.
SILCA Sicuro Titanium Water Bottle Cage installed on a bicycle frame

Obrázek 3: The water bottle cage securely installed on a bicycle frame, demonstrating proper alignment and fit.

1 video: Konecview of the Titanium Water Bottle Cage, demonstrating its features and installation process. This video is provided by the seller.

Návod k obsluze

The SILCA Sicuro Titanium Water Bottle Cage is designed for straightforward use:

  • Vložení lahve: Gently slide your water bottle into the cage from the top. The cage's design ensures a snug fit, holding the bottle securely.
  • Vyjmutí lahve: Pull the water bottle firmly upwards to remove it from the cage. The cage's flexible yet secure design allows for easy in-and-out access during rides.
  • Kompatibilita: This cage is optimized for standard bicycle water bottles.

Údržba

To ensure the longevity and performance of your water bottle cage, follow these maintenance guidelines:

  • Čištění: Wipe the cage with a damp cloth to remove dirt and grime. For stubborn marks, a mild soap solution can be used, followed by rinsing and drying.
  • Inspekce: Periodically inspect the cage for any signs of damage, such as cracks or bends. Check the mounting bolts for tightness and re-tighten if necessary.
  • Péče o materiál: Titanium is highly corrosion-resistant. Avoid using abrasive cleaners or tools that could scratch the surface.

Odstraňování problémů

ProblémMožná příčinaŘešení
Bottle feels loose in cage.Cage may have slightly widened over time or bottle is undersized.Gently bend the cage arms inward slightly to increase tension. Ensure your bottle is a standard size.
Bottle falls out during rides.Insufficient tension or improper bottle size.Adjust cage tension as described above. Verify bottle compatibility. For very rough terrain, consider additional bottle retention methods if issues persist.
Cage is rattling.Uvolněné montážní šrouby.Check and tighten the mounting bolts securely.

Specifikace

  • Značka: SILCA
  • Model: Sicuro Titanium Water Bottle Cage (V2)
  • Číslo modelu položky: SI/160877
  • Materiál: Titan
  • Barva: Rainbow (as per product variant)
  • Rozměry produktu: 7 cm D x 4 cm Š x 4 cm V
  • Hmotnost položky: 1.6 unce
  • Nastavení: 21mm Fore/Aft
  • UPC: 810093160877
  • Výrobní: Hand bent and laser welded in Indiana, USA.

Záruka a podpora

For warranty information or technical support, please refer to the official SILCA webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případné reklamace.

Oficiální Webmísto: www.silca.cc

Související dokumenty - Sicuro Titanium Water Bottle Cage (V2, SI/160877)

Předview Stručný návod k obsluze Silca Futura USA: Nastavení a provoz
Začněte rychle s řezačkou klíčů Silca Futura USA. Tato příručka zahrnuje počáteční nastavení, připojení tabletu, konfiguraci softwaru a základní navigaci pro efektivní provoz.
Předview Manuál pro návod SILCA Twister II NA: Guía Completa de Uso y Mantenimiento
Návod k obsluze podrobný pro strojní duplikátor klíče SILCA Twister II NA. Cubre instalación, operación, mantenimiento, seguridad y especificaciones técnicas para duplicar llaves punzonadas, de regatas (láser) y FICHET.
Předview Ruční řezačka klíčů SILCA D844063ZB Fastbit
Ruční řezačka klíčů Silca Fastbit D844063ZB je vhodná pro kopírování různých typů klíčů, včetně bitů, dvojitých bitů (samec a samice), pumpičkových klíčů a klíčů s centrálním dorazem. Vyznačuje se uživatelsky přívětivým designem, vysoce kvalitními materiály, pružinovým mikrometrickým rýhovacím hrotem a samostředicím hrotem.ampa ergonomické ovládací prvky pro přesný a spolehlivý provoz.
Předview Návod k obsluze SILCA RW4 Plus: Průvodce kopírováním transpondérového klíče
Komplexní návod k obsluze pro kopírovací stroj transpondérových klíčů SILCA RW4 Plus. Zahrnuje funkce, instalaci, provoz, údržbu a řešení problémů s programováním klíčů od vozidel.
Předview Návod k obsluze řezačky klíčů Silca Twister II NA
Komplexní návod k obsluze řezačky klíčů Silca Twister II NA, který podrobně popisuje její funkce, instalaci, provoz, údržbu a bezpečnostní postupy pro různé typy klíčů, jako jsou důlkové, laserové a FICHET klíče.
Předview Servisní manuál SILCA TECHLA 3.0: Průvodce provozem a údržbou
Komplexní servisní manuál pro gravírovací a řezací stroj SILCA TECHLA 3.0. Zahrnuje obsluhu systému, aktualizace, řešení problémů a postupy údržby pro optimální výkon.