1. Konec produktuview
The LOVMOR 2 Tier Individual Pull Out Cabinet Organizer is designed to maximize storage efficiency and accessibility within your kitchen cabinets. This robust organizer features two independently sliding shelves, allowing for easy retrieval of items typically stored at the back of cabinets. Its full-extension ball-bearing system ensures smooth and silent operation, capable of supporting up to 100 pounds.
2. Bezpečnostní informace
Před montáží a použitím si prosím přečtěte a pochopte všechny pokyny. Uschovejte si tento návod pro budoucí použití.
- Ensure the cabinet organizer is securely fastened to a stable surface to prevent tipping or movement.
- Nepřekračujte maximální nosnost 100 liber.
- Během provozu se vyhýbejte pohyblivým částem a chraňte si prsty před skřípnutím.
- Use appropriate tools for installation as specified in the setup section.
- Verify that the cabinet dimensions are suitable for the organizer before beginning installation.
3. Obsah balení
Před zahájením montáže ověřte, zda jsou všechny níže uvedené komponenty přítomny a nepoškozené.
| Komponent | Množství |
|---|---|
| Pull-out Baskets | 2 |
| Side Frames with Slides | 2 sady |
| Montážní držáky | 4 |
| Šrouby (různé velikosti) | Roztříděný |
| Montážní šablona | 1 |
| Návod k obsluze | 1 |
4. Nastavení a instalace
Follow these steps for proper installation of your LOVMOR cabinet organizer. For detailed visual instructions, refer to the installation video and the included PDF manual.
4.1 Kontroly před instalací
- Measure your cabinet opening to ensure it meets the minimum requirements: 12.5" minimum width, 24" minimum depth, and 15" minimum height. Do not include hinges in your width measurement.
- Clear the cabinet of all contents.
4.2 Assembly of the Frame
- Pull out the ball bearing system on the side frames to expose the screw holes.
- Attach the side frames to the base brackets using the provided screws. Ensure all screws are tightened securely.
- Repeat for both side frames to form the complete frame structure.
4.3 Mounting the Organizer in the Cabinet
- Place the mounting template inside your cabinet, aligning it with the front edge. Fold the template along the dotted line if necessary to fit the cabinet depth.
- Using a drill (2.5mm bit recommended), pre-drill pilot holes at the marked locations on the template.
- Position the assembled frame inside the cabinet, aligning the pre-drilled holes with the mounting holes on the frame.
- Secure the frame to the cabinet floor using the appropriate screws. For added stability, secure the rear brackets to the back wall of the cabinet if possible.
4.4 Installing the Baskets
- Slide the baskets onto the installed full-extension slides. Ensure they click into place securely.
- The upper and lower baskets feature two height adjustment options. Select the desired height by aligning the basket with the appropriate holes on the side frames before securing.
For a complete installation guide, please refer to the official Instalační manuál (PDF).
5. Provoz
The LOVMOR cabinet organizer is designed for simple and efficient use, bringing items from the back of your cabinet to the front.
- To access items, simply pull the desired basket forward. The full-extension ball-bearing system allows the basket to slide completely out of the cabinet opening.
- Each basket operates independently, allowing you to access the upper or lower tier without disturbing the other.
- When finished, gently push the basket back into the cabinet until it is fully retracted.
6. Údržba
Abyste zajistili dlouhou životnost a bezproblémový provoz vašeho organizéru na skříňky LOVMOR, dodržujte tyto jednoduché pokyny pro údržbu:
- Čištění: Otřete kovové povrchy měkkým hadříkemamp cloth and mild detergent. Avoid abrasive cleaners or scouring pads, as they can damage the chrome finish. Dry thoroughly after cleaning.
- Mazání: Periodically check the ball-bearing slides for smooth movement. If they become stiff or noisy, apply a small amount of silicone-based lubricant to the tracks. Avoid oil-based lubricants, which can attract dust and debris.
- Inspekce: Regularly inspect all screws and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability and prevent wobbling.
- Rozložení hmotnosti: Distribute items evenly across the baskets to prevent strain on the slides and frame. Avoid placing excessively heavy items on one side.
7. Řešení problémů
If you encounter any issues with your cabinet organizer, refer to the following common problems and their solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Koše se neposouvají hladce. | Dirt or debris in slides; lack of lubrication; uneven installation. | Clean slides and apply silicone lubricant. Check that the frame is level and securely mounted. |
| Organizer wobbles or feels unstable. | Loose mounting screws; uneven cabinet floor; incorrect installation. | Tighten all mounting screws. Ensure the cabinet floor is flat. Re-check installation steps. |
| Baskets do not fully retract. | Obstruction in cabinet; items protruding from basket. | Check for items blocking the path. Ensure nothing is hanging over the edge of the basket. |
| Baskets are difficult to remove/install. | Incorrect alignment during installation. | Ensure the basket clips are properly aligned with the slide mechanism. Refer to installation steps. |
8. Specifikace
Detailed technical specifications for the LOVMOR 2 Tier Individual Pull Out Cabinet Organizer:
| Atribut | Detail |
|---|---|
| Rozměry produktu (D x Š x V) | 21 cm x 11 cm x 13.8 cm |
| Materiál | Kov |
| Typ dokončení | Chrome |
| Doporučená maximální hmotnost | 100 libry |
| Počet polic | 2 |
| Montáž Vyžadována | Ano |
| Počet jednotek | 1.0 Počet |
| Hmotnost položky | 15.02 libry |
| Specifické použití pro produkt | Kuchyně |
| Číslo modelu | individuální 2patrový koš-otec |
9. Záruka a podpora
LOVMOR products are manufactured to high-quality standards. For information regarding warranty coverage, product support, or to address any concerns not covered in this manual, please contact LOVMOR customer service through the retailer where the product was purchased or visit the official LOVMOR store page on Amazon.
Online podpora: Visit the LOVMOR Store on Amazon
Please have your model number (individual 2 tier basket-father) and purchase date available when contacting support.
