1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your LOVMOR 2 Tier Individual Pull Out Cabinet Organizer. Designed to enhance kitchen cabinet organization, this unit allows for easy access to items stored in the back of cabinets. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Image 1.1: Before and After installation of the LOVMOR Pull Out Cabinet Organizer, demonstrating improved organization.
2. Bezpečnostní informace
- Ensure all components are securely fastened during installation to prevent instability.
- Do not exceed the maximum load capacity of 100 pounds per shelf. Overloading can cause damage to the unit or cabinet.
- Keep hands clear of moving parts during operation to avoid pinching.
- This product is intended for indoor use in kitchen cabinets only.
3. Obsah balení
Please verify that all parts listed below are present in your package before beginning installation. If any parts are missing or damaged, please contact customer support.
Image 3.1: Visual representation of the packing list for the cabinet organizer.
Seznam součástí:
- 2 x Wire Baskets (Upper and Lower)
- 4 x Full-Extension Ball-Bearing Slide Rails
- 2 x Vertical Support Brackets
- Mounting Screws (various sizes for rails and brackets)
- Montážní šablona
- Návod k použití
4. Nastavení a instalace
Proper measurement and installation are crucial for the functionality of your pull-out organizer. Please follow these steps carefully.
4.1 Cabinet Measurement Guide
Před nákupemasing or installing, measure your cabinet's interior dimensions. This organizer requires a minimum cabinet opening of 12.5 inches wide, 21 inches deep, and 15 inches high. Do not include cabinet door hinges in your width measurement.
Image 4.1: Guide for measuring cabinet dimensions for proper fit.
4.2 kroky instalace
- Attach Slide Rails to Brackets: Screw the four full-extension ball-bearing slide rails to the vertical support brackets. Ensure they are oriented correctly for smooth operation.
- Position Brackets in Cabinet: Use the provided mounting template to mark the screw holes on the bottom of your cabinet. Align the assembled brackets with the marked holes.
- Bezpečné držáky: Screw the brackets firmly into the cabinet base. Ensure the brackets are parallel and level for optimal performance.
- Instalace košíků: Carefully slide the wire baskets onto the installed slide rails. The baskets should click into place.
- Nastavení výšky koše (volitelné): The upper and lower baskets have two height adjustment options on the stand. Adjust as needed by repositioning the baskets on the vertical supports.
Image 4.2: Details of screw attachment and slide rail mechanism.
5. Návod k obsluze
The LOVMOR 2 Tier Pull Out Cabinet Organizer is designed for smooth and convenient access to your stored items.
5.1 Pull-Out Functionality
- Gently pull the front of either the upper or lower basket to extend it out of the cabinet. The full-extension ball-bearing system allows the baskets to slide out completely, providing full access to contents.
- To retract, push the basket back into the cabinet until it is fully seated.
Image 5.1: Demonstrating individual pull-out for upper and lower baskets.
5.2 Nastavení výšky
The upper and lower baskets can be adjusted to two different heights to accommodate various item sizes. This adjustment is made during installation by selecting the appropriate holes on the vertical support brackets.
Image 5.2: Full Extension Ball Bearing System and height adjustment options.
6. Údržba
To ensure the longevity and optimal performance of your LOVMOR cabinet organizer, follow these simple maintenance guidelines:
- Čištění: Otřete kovové povrchy čisticím prostředkemamp hadříkem. Na odolné skvrny lze použít jemný mýdlový roztok a poté povrch důkladně osušit. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, které by mohly poškodit chromový povrch.
- Mazání: Periodically check the slide rails for smooth operation. If any resistance is felt, a small amount of silicone-based lubricant can be applied to the ball bearings.
- Inspekce: Regularly inspect all screws and connections to ensure they remain tight. Tighten any loose fasteners as needed.
7. Řešení problémů
If you encounter any issues with your cabinet organizer, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Koše se neposouvají hladce. | Loose screws, debris in rails, lack of lubrication, uneven installation. | Check and tighten all screws. Clean rails of any debris. Apply silicone lubricant to ball bearings. Verify brackets are level. |
| Baskets are difficult to pull out or push in. | Overloaded basket, misaligned rails, items obstructing movement. | Reduce weight in the basket. Recheck rail alignment. Ensure no items are blocking the slide path. |
| Organizér se chová vratce nebo nestabilně. | Loose mounting screws, improper installation. | Ensure all mounting screws are securely tightened to the cabinet base. Re-evaluate installation steps for proper alignment. |
8. Specifikace
- Rozměry produktu: 11 cm Š x 18 cm H x 13.8 cm V
- Minimum Cabinet Opening Required: 12.5" W x 21" D x 15" H (excluding hinges)
- Materiál: Kov
- Dokončit: Chrome
- Speciální funkce: Odolné proti korozi
- Počet úrovní: 2
- Nosnost: Až 100 liber
- Požadovaná montáž: Ano
- Číslo modelu: individuální 2patrový koš-otec
- UPC: 768486269549
Obrázek 8.1: Podrobné rozměry produktu.
9. Záruka a podpora
LOVMOR products are manufactured with quality and durability in mind. For specific warranty information or if you require assistance with your product, please refer to the contact information provided at the point of purchase or visit the official LOVMOR webstránky. Uschovejte si prosím doklad o koupi pro případné reklamace.
