Důležité bezpečnostní informace
Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.
- Před prováděním údržby nebo čištění vždy odpojte napájení.
- Do not install in areas where gasoline, paint, or other flammable liquids are used or stored.
- Maintain clearances from combustible materials as specified in the installation section.
- Tento ohřívač je při použití horký. Abyste předešli popáleninám, nedovolte, aby se holá pokožka dotýkala horkých povrchů.
- Pokud je jakýkoli ohřívač používán dětmi nebo invalidy, nebo v jejich blízkosti, je nutný pečlivý dohled.
Konec produktuview
The Dimplex LC2507W31 is a 25-inch linear convector electric baseboard heater designed to provide efficient and quick heating for various indoor spaces. Its compact and sleek design allows for discreet installation while delivering consistent warmth.

Obrázek 1: Přední strana view of the Dimplex LC2507W31 Linear Convector Electric Baseboard Heater.

Obrázek 2: Detailní přední strana view of the Dimplex LC2507W31 heater, highlighting its sleek design.

Figure 3: Dimensions of the Dimplex LC2507W31 heater, showing its length, height, and depth for installation planning.
Nastavení a instalace
This section provides instructions for the proper installation of your Dimplex baseboard heater. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
1. Místo montáže
- Mount the heater on a wall, ensuring it is level.
- Maintain a minimum clearance of 6 inches (15 cm) from the floor and 12 inches (30 cm) from any combustible materials above the heater.
- Avoid installing directly below electrical outlets.
2. Elektrické připojení
- Ensure the main power supply to the circuit is turned OFF at the circuit breaker or fuse box before beginning any wiring.
- Connect the heater to a dedicated 240V circuit. Refer to the wiring diagram provided with the heater for specific connections.
- All wiring must comply with the National Electrical Code (NEC) and local codes.
3. Securing the Heater
- Secure the heater to the wall studs using appropriate mounting hardware.
- Ensure the heater is firmly attached and stable.
Návod k obsluze
The Dimplex LC2507W31 baseboard heater operates by convection, drawing in cool air from the bottom and releasing warm air from the top. This model typically requires an external thermostat for temperature control (not included).
1. Počáteční zapnutí
- After installation, turn on the main power supply to the heater circuit.
- The heater may emit a slight odor during its first few hours of operation. This is normal and will dissipate quickly.
2. Regulace teploty
- If an external thermostat is installed, set the desired room temperature using the thermostat controls.
- Ohřívač se bude cyklicky zapínat a vypínat, aby udržoval nastavenou teplotu.
3. Obecné tipy pro provoz
- Do not block the air intake or outlet grilles. This can reduce heating efficiency and pose a fire hazard.
- Keep drapes, furniture, and other objects away from the heater to ensure proper airflow and safety.

Figure 4: The Dimplex LC2507W31 heater discreetly installed in a bedroom, demonstrating its compact footprint.

Figure 5: The Dimplex LC2507W31 heater installed in a bathroom, showcasing its suitability for various room types.

Figure 6: The Dimplex LC2507W31 heater installed in a kitchen, illustrating its versatile placement options.
Údržba
Your Dimplex baseboard heater requires minimal maintenance. Regular cleaning will help maintain its efficiency and appearance.
1. Čištění
- Before cleaning, ensure the power to the heater is turned OFF at the circuit breaker.
- Allow the heater to cool completely.
- Vnější povrchy otřete měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Use a vacuum cleaner with a brush attachment to remove dust from the grilles and interior components.
- Do not spray liquids directly onto the heater.
2. Skladování
If storing the heater for an extended period, ensure it is clean and dry. Store in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
Odstraňování problémů
If you experience issues with your Dimplex baseboard heater, refer to the following common problems and solutions. If the problem persists, contact qualified service personnel.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ohřívač se nezapne. | Jednotka není napájena. Termostat nastaven příliš nízko. Vypnul se jistič. | Zkontrolujte napájení. Zvyšte nastavení termostatu. Resetujte jistič. |
| Topidlo produkuje nedostatečné teplo. | Blocked air grilles. Velikost místnosti je příliš velká vzhledem k výkonu topení. External thermostat malfunction. | Clear obstructions from grilles. Consider additional heating or a higher wattage jednotka. Consult an electrician to check thermostat. |
| Neobvyklé pachy během provozu. | Hromadění prachu. New heater "burn-off" smell. | Clean the heater thoroughly. This is normal for new heaters and will dissipate. Ensure good ventilation. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | DIMPLEX |
| Číslo modelu | LC2507W31 |
| Barva | Bílý |
| Rozměry produktu | 2.38"H x 25"Š x 6.63"V |
| svtage | 240 voltů (AC) |
| Ampvymazat | 3.13 Amps |
| Typ paliva | Elektrický |
| Pokrytí topení | 6.68 čtverečních stop |
| Typ montáže | Držák na zeď |
| Hmotnost položky | 4.55 libry |
| UPC | 781052063976 |
Záruka a podpora
Omezená záruka
Dimplex warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty does not cover damage resulting from misuse, abuse, accident, alteration, or improper installation.
Zákaznická podpora
For technical assistance, troubleshooting, or warranty claims, please contact Dimplex customer support:
- Webmísto: www.dimplex.com
- Telefon: Refer to the Dimplex webmísto pro regionální kontaktní čísla.
- E-mail: Refer to the Dimplex webweb s e-mailovými adresami podpory.
Please have your model number (LC2507W31) and date of purchase ready when contacting support.





