1. Úvod
Thank you for choosing the WORKPRO Cabinet Jack Support Pole. This adjustable telescopic support rod is designed to provide a reliable third hand for various home improvement and construction tasks. With a robust steel construction and a capacity of 154 lbs (70 kg), it is ideal for cabinet installation, drywall lifting, crown molding, and securing cargo. This manual provides essential information for safe and effective use of your support poles.
Image: Two WORKPRO Cabinet Jack Support Poles and a black carrying bag.
2. Bezpečnostní informace
- Always ensure the support pole is placed on a stable, level surface.
- Do not exceed the maximum load capacity of 154 lbs (70 kg) for vertical support or 66 lbs (30 kg) for 45-degree angled support.
- Verify that the locking pins are fully engaged and the quick release lever is securely tightened before applying load.
- Používejte vhodné osobní ochranné prostředky (OOP), jako jsou ochranné brýle a rukavice.
- Během nastavování se vyhýbejte pohyblivým částem a nedotýkejte se jejich rukou a prstů.
- Inspect the pole for any damage or wear before each use. Do not use if damaged.
- Když je uvolněnoasing a loaded pole, do so slowly and with caution to prevent sudden drops.
3. Obsah balení
Your WORKPRO Cabinet Jack Support Pole package includes:
- 2 x WORKPRO Cabinet Jack Support Poles (54-114 inches)
- 1 x taška na přenášení
- Additional non-slip PVC pads (if included with your model)
4. Konec produktuview
The WORKPRO Cabinet Jack Support Pole features a robust design for versatile use. Key components include:
- Galvanized Adjusting Solid Bar: Provides strength and corrosion resistance for height adjustments.
- Heavy Duty Steel Tube: The main body of the pole, ensuring durability.
- Rotating Head with Non-slip Pads: The base and top pads can rotate 360° and tilt 45° for flexible positioning and secure grip.
- Páčka rychlého uvolnění: For fine adjustments and quick retraction.
- Zamykací knoflík: Secures the pole at the desired height.
- Spring-loaded Lock Pins: For coarse height adjustments.
Image: Diagram illustrating the pole's dimensions (54-114 inches) and key material components.
Protiskluzová podložka
Ergonomická rukojeť
Rychloupínací páka
Spring-loaded Lock
5. Pokyny k nastavení a obsluze
Follow these steps to properly set up and operate your WORKPRO Cabinet Jack Support Pole:
- Step 1: Loosen the Locking Knob. Rotate the red locking knob counter-clockwise to loosen it.
- Step 2: Adjust Coarse Height. Press the two spring-loaded pins on the inner tube to release the lock. Slide the inner tube to approximately the desired height. Ensure the red line mark on the inner tube aligns with the hole on the outer tube to locate the pins easily.
- Step 3: Fine-tune Height and Secure. Lift the quick release lever upwards to allow the upper bar to extend. Position the pole under the object to be supported. Once the pole is at the correct height, re-tighten the red locking knob clockwise until secure.
- Step 4: Apply Final Pressure. Squeeze the handle repeatedly until the pad is firmly fixed under the supported load, providing the necessary pressure.
- Uvolnit: Lift the quick release lever upwards. The upper bar will retract, releasintlak.
Image: Step-by-step visual instructions for adjusting and securing the support pole.
Image: Detail of the red line mark for pin alignment.
Tipy pro použití:
- The support pole base and top pads can be rotated 360° and tilted up to 45° to accommodate various angles and surfaces.
- For vertical support (90°), the maximum load is 154 lbs (70 kg).
- For angled support (45°), the maximum load is 66 lbs (30 kg).
Image: Illustration of vertical and angled support capabilities and load limits.
Image: Worker using the pole for drywall installation, showcasing the textured non-slip pads.
6. Údržba
- Čištění: Wipe down the poles with a clean, damp cloth after each use to remove dust and debris. Avoid abrasive cleaners.
- Mazání: Periodically apply a light lubricant to the sliding parts and quick release mechanism to ensure smooth operation.
- Skladování: Store the poles in their carrying bag in a dry, clean environment to prevent rust and damage.
- Inspekce: Regularly check all components, including the pads, pins, and lever, for signs of wear, bending, or damage. Replace any damaged parts immediately.
Image: Carrying bag for convenient storage and transport.
7. Řešení problémů
- Pole not extending/retracting smoothly: Check for debris in the tubes. Apply a light lubricant to the sliding surfaces. Ensure the locking knob is fully loosened.
- Pole not holding position: Ensure the locking knob is fully tightened and the quick release lever is engaged. Verify that the spring-loaded pins are correctly seated in the adjustment holes. Do not exceed the maximum load capacity.
- Pads slipping: Ensure the pads are clean and free of grease or oil. Use the additional PVC pads for enhanced grip on smooth surfaces. Verify the load is centered on the pads.
- Difficulty finding pins: Align the red line mark on the inner tube with the holes on the outer tube to easily locate the spring-loaded pins.
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | W004709 |
| Nastavitelný rozsah výšky | 54 - 114 palce (137 - 290 cm) |
| Materiál | Steel, Aluminum (handle) |
| Maximum Vertical Load Capacity (90°) | 154 lb (70 kg) |
| Maximum Angled Load Capacity (45°) | 66 lb (30 kg) |
| Rozměry produktu | 54 x 7.87 x 3.15 cm (složené) |
| Hmotnost položky | 15.62 pounds (per pole) |
| Množství v balení | 2 tyče |
9. Záruka a podpora
WORKPRO products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official WORKPRO website. If you encounter any issues or require assistance, please contact WORKPRO customer support through their official channels.
Další informace nebo podporu získáte na adrese WORKPRO Store on Amazon.
