1. Úvod
This manual provides detailed instructions for the assembly, operation, and maintenance of your Pokitter Projector Floor Stand. Designed for versatility and stability, this stand is suitable for projectors, small cameras, webcams, microphones, and GoPro devices. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
Figure 1.1: The Pokitter Projector Floor Stand, showcasing its sleek design and stable base.
2. Vlastnosti produktu
- Nastavitelná výška: The stand offers a versatile height range from 4.1 inches to 40.2 inches, allowing for optimal positioning of your device.
- 360-Degree Swivel Ball Head: Equipped with a pivot ball head that allows for full 360-degree rotation, enabling precise angle adjustments for your mounted device.
- Integrovaná správa kabelů: Designed with internal channels to neatly route cables, maintaining a clean and organized setup.
- Stable Floor Base: Features a weighted, circular base for enhanced stability, preventing accidental tipping.
- Kompatibilita s více zařízeními: Ideal for use with projectors, small cameras, webcams, microphones, and GoPro devices.
Figure 2.1: Illustration of the stand's adjustable height capabilities, showing various height configurations.
Obrázek 2.2: Detail view of the 360-degree swivel ball head, demonstrating its rotational freedom.
Figure 2.3: The stand in use, highlighting the integrated cable management system and the stable circular base.
3. Pokyny k nastavení
Follow these steps to assemble your Pokitter Projector Floor Stand:
- Rozbalte komponenty: Carefully remove all parts from the packaging. Verify that all components shown in Figure 3.1 are present.
- Sestavte sekce tyčí: Screw the individual pole sections together clockwise until they are securely fastened. The number of sections used will determine the initial height.
- Připojit základnu: Screw the assembled pole onto the circular base, ensuring it is tightened firmly to provide stability.
- Připevnění kulové hlavy: Screw the 360-degree swivel ball head onto the top of the assembled pole.
- Montážní zařízení: Attach your projector, camera, or other compatible device to the ball head's mounting screw. Ensure it is securely fastened.
Figure 3.1: All components of the Pokitter Projector Floor Stand laid out for easy assembly.
4. Návod k obsluze
- Nastavení výšky: To adjust the height, loosen the locking collars on the pole sections, extend or retract the sections to the desired height, and then tighten the collars securely.
- Úhel nastavení: Loosen the knob on the side of the ball head to adjust the angle of your mounted device. Once the desired angle is achieved, tighten the knob firmly to lock it in place. The ball head allows for full 360-degree rotation.
- Správa kabelů: Route your device's power and data cables through the internal channels of the stand's pole for a tidy setup.
Figure 4.1: The Pokitter Projector Stand in a typical usage scenario, demonstrating its practical application.
5. Údržba
- Čištění: Wipe the stand with a soft, dry cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents.
- Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené a bezpečné.
- Skladování: When not in use for extended periods, store the stand in a cool, dry place, ideally in its original packaging or a protective cover.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stojan se zdá být nestabilní. | Volné spoje nebo nerovný povrch. | Ensure all pole sections and the base are tightly screwed. Place the stand on a flat, stable surface. |
| Device angle slips. | Ball head knob not tightened sufficiently. | Tighten the ball head adjustment knob firmly after setting the desired angle. Ensure the device weight does not exceed the stand's capacity. |
| Obtížnost nastavení výšky. | Locking collars are too tight or dirty. | Loosen locking collars sufficiently before adjusting. Clean any debris from the pole sections. |
7. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 2 |
| Značka | Pokitter |
| Nastavitelný rozsah výšky | 4.1 palců až 40.2 palců |
| Hmotnost položky | 8.72 libry |
| Materiál | Silicone (as per product specifications) |
| Typ hlavy | 360 Degree Swivel Pivot Ball Head |
8. Záruka a podpora
Pokitter stands behind the quality of its products. For specific warranty information, please refer to the documentation included with your purchase or visit the official Pokitter website. For technical support, troubleshooting assistance, or any inquiries regarding your product, please contact Pokitter customer service through their official channels.
Více informací a kontaktní údaje naleznete na Obchod Pokitter na Amazonu.
