EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Model: ZM4328

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Bezpečnostní pokyny

  • Elektrická bezpečnost: Instalaci musí provést kvalifikovaný elektrikář v souladu s místními předpisy pro elektroinstalaci. Před instalací nebo údržbou se ujistěte, že je odpojeno napájení.
  • svtage: This product operates on a 230V AC power supply.
  • Stupeň krytí IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Světelný zdroj: LED světelný zdroj je integrovaný a nelze jej vyměnit uživatelem. Nepokoušejte se světelný zdroj rozebírat.
  • Provozní teplota: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Nastavení a instalace

Pro správnou instalaci postupujte podle následujících kroků:

  1. Odpojit napájení: Před zahájením práce se ujistěte, že je hlavní přívod proudu do prostoru instalace vypnut jističem.
  2. Připravte montážní povrch: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Připevněte montážní držák: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Zadní view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Obrázek 3: Zadní view with mounting bracket.

  1. Zapojení: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Obnovit napájení: Znovu zapněte hlavní napájení.

5. Návod k obsluze

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Funkce pohybového senzoru

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Rozsah detekce: Adjusts the maximum distance at which motion is detected.
  • Doba držení: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.

Poznámka: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Údržba

  • Čištění: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Ochrana proti hmyzu: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Žádné díly opravitelné uživatelem: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7. Řešení problémů

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Světlo se nerozsvítí.Žádné napájení.
Nesprávné zapojení.
Daylight sensor setting too high.
Zkontrolujte jistič a připojení napájení.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Světlo svítí neustále.Detekován nepřetržitý pohyb.
Hold time setting too long.
Porucha snímače.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
Pokud problém přetrvává, kontaktujte podporu.
Light turns on/off too frequently.Sensitivity too high.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Senzor nedetekuje pohyb.Sensitivity too low.
Detection range too narrow.
Obstruction blocking sensor.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Specifikace

ZnačkaEMOS
Číslo modeluZM4328
Rozměry (průměr x výška)220 mm x 53 mm (approx. 8.66 in x 2.09 in)
Hmotnost622 gramů (přibližně 1.37 libry)
Moc15 wattů
Světelný tok1500 XNUMX lumenů
Teplota barev4000 Kelvinů (neutrální bílá)
Index podání barev (CRI)80
Žárovková ekvivalence100 wattů
svtage230 voltů AC
Hodnocení IPIP54
MateriálAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
Speciální funkceMicrowave Motion Detector, Energy-saving, Waterproof
Třída energetické účinnostiE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Obrázek 6: Rozměry produktu.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Záruka a podpora

Záruka

This EMOS ZM4328 TORI LED Ceiling Light comes with a 3-letá záruka od data nákupu. Uschovejte si doklad o koupi pro případ reklamace. Záruka se vztahuje na vady materiálu a zpracování při běžném používání.

Zákaznická podpora

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webmísto.

Související dokumenty - ZM4328

Předview EMOS ZM3131 ZM3231 LED nástěnné svítidlo s PIR senzorem - Specifikace a manuál
Podrobné informace a uživatelská příručka pro nástěnná LED svítidla EMOS ZM3131 a ZM3231 s PIR senzorem. Obsahuje specifikace, montážní pokyny a bezpečnostní upozornění.
Předview EMOS G1125 PIR senzor pohybu: Specifikace a instalační průvodce
Podrobné specifikace, funkce a instalační návod pro pohybový senzor EMOS G1125 PIR. Zjistěte více o jeho detekčním dosahu, citlivosti, výkonu a dalších informacích.
Předview EMOS LED Panels: Recessed & Built-in Lighting - Specifications, Installation, and Warranty
Comprehensive guide to EMOS LED panels, including recessed and built-in models (ZD11xx and ZD21xx series). Features detailed specifications, installation instructions, safety warnings, energy efficiency information, and warranty details for indoor lighting applications.
Předview EMOS GS11111 PIR senzor pohybu - automatické ovládání vnitřního osvětlení
Podrobné informace o pohybovém senzoru EMOS GS11111 PIR, včetně technických specifikací, instalačního návodu a bezpečnostních pokynů pro automatické ovládání vnitřního osvětlení.
Předview LED světlomety EMOS ZS2313W, ZS2333W, ZS2323W s PIR senzorem: Specifikace a instalační návod
Komplexní technické specifikace, pokyny k instalaci, pokyny k údržbě a bezpečnostní varování pro LED světlomety EMOS ZS2313W, ZS2333W a ZS2323W s integrovanými PIR senzory pohybu. Zahrnuje podrobnosti o parametrech PIR senzorů, montáži, zapojení a shodě produktu s předpisy.
Předview Uživatelská příručka detektoru oxidu uhelnatého P56400S | EMOS
Komplexní uživatelská příručka k detektoru oxidu uhelnatého (CO) EMOS P56400S. Seznamte se s bezpečnostními pokyny, technickými specifikacemi, instalací, provozem, integrací mobilní aplikace s EMOS GoSmart a řešením problémů.