SOOPYK 2-in-1 Water Cooler Dispenser with Ice Maker

1. Úvod

Thank you for choosing the SOOPYK 2-in-1 Water Cooler Dispenser with Ice Maker. This appliance provides convenient access to cold and room-temperature water, along with the ability to produce fresh ice cubes. Designed for ease of use and efficiency, this manual will guide you through the setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your unit.

Obrázek 1.1: Přední strana view of the SOOPYK 2-in-1 Water Cooler Dispenser with Ice Maker, showing its sleek black design and bottom-loading water bottle compartment.

2. Důležité bezpečnostní pokyny

To reduce the risk of injury, property damage, or electric shock, always follow basic safety precautions when using electrical appliances. Read all instructions before using this dispenser.

• Tento spotřebič je určen pouze pro vnitřní použití. Nepoužívejte venku.
• Place the dispenser on a hard, level surface in a cool, shaded area away from direct sunlight and heat sources.
• Ensure proper ventilation around the unit. Maintain at least 4 inches (10 cm) clearance from walls or other objects.
• Neponořujte dávkovač, kabel ani zástrčku do vody ani jiných kapalin.
• Unplug the dispenser before cleaning, servicing, or when not in use for extended periods.
• Nepoužívejte dávkovač s poškozeným kabelem nebo zástrčkou.
• Keep children away from the dispenser. Supervise children when they are near the appliance.
• Use only 3-5 gallon (11.3-18.9 liter) water bottles with this unit.
• This unit does not provide hot water.

3. Obsah balení

Please check that all items are included in your package. If any items are missing or damaged, contact customer support.

• SOOPYK 2-in-1 Water Cooler Dispenser with Ice Maker
• Vyjímatelná odkapávací miska
• Napájecí kabel (integrovaný)
• Uživatelská příručka
• Installation Accessories (Bracket, Screws, Gasket)

Image 3.1: Components for securing the water cooler, including a bracket, screws, and gasket, along with step-by-step instructions for installation.

4. Nastavení a instalace

4.1 Vybalení a umístění

1. Opatrně vyjměte dávkovač z obalu.
2. Place the dispenser upright on a flat, stable surface. Ensure there is adequate space around the unit for ventilation (at least 4 inches from walls).
3. Před zapojením nechte jednotku alespoň 2 hodiny stát ve svislé poloze. To umožní usadit chladivo.

4.2 Installing the Water Bottle (Bottom Load)

This dispenser features a convenient bottom-loading design, eliminating the need to lift heavy water bottles.

1. Otevřete spodní dvířka skříňky dávkovače.
2. Place a fresh 3 or 5-gallon water bottle into the cabinet.
3. Insert the probe assembly from the dispenser into the neck of the water bottle. Ensure it is securely seated.
4. Close the cabinet door completely. The dispenser will not pump water unless the door is fully closed.

Obrázek 4.1: View of the bottom-loading compartment with a 5-gallon water bottle inserted. Note the white button that ensures the door is closed for water to pump.

4.3 Počáteční čištění a připojení k elektrické síti

1. Before first use, it is recommended to flush the water lines. Dispense several cups of water from the cold water faucet until the water runs clear and free of any plastic taste.
2. Zapojte napájecí kabel do uzemněné elektrické zásuvky.

5. Návod k obsluze

Your SOOPYK dispenser offers cold water and ice-making functions, controlled via an intuitive touch panel.

Image 5.1: Close-up of the control panel, showing indicator lights for Power, Ice, Cold Water, Add Water, and control buttons for Make Cold Water, Make Ice, Ice Fill, and Water Fill.

5.1 Ovládací panel Overview

• Vypínač: Zapíná/vypíná jednotku.
• Ice Indicator: Lights up when the ice making function is active.
• Indikátor studené vody: Lights up when the cold water cooling function is active.
• Přidejte indikátor vody: Rozsvítí se, když je láhev s vodou prázdná a je třeba ji vyměnit.
• Make Cold Water Button: Activates/deactivates the cold water cooling.
• Make Ice Button: Initiates/stops the ice making cycle.
• Ice Fill Indicator: Lights up when the ice storage bin is full.
• Water Fill Indicator: Lights up when the internal water reservoir needs refilling from the bottle.

5.2 Dávkování studené vody

1. Ensure the unit is plugged in and the water bottle is installed.
2. Press the "Make Cold Water" button on the control panel. The cold water indicator light will illuminate.
3. Place a glass under the cold water faucet.
4. Press the cold water dispensing lever to fill your glass. Release to stop.
5. Allow approximately 15-20 minutes for the water to cool to optimal temperature after initial setup or refilling.

5.3 Výroba ledu

The built-in ice maker produces bullet-shaped ice cubes.

Image 5.2: Graphic illustrating the ice making efficiency: 6 minutes for fast ice making, 9 pieces per cycle, and a daily capacity of 27 lbs (note: product description states 18 lbs).

Image 5.3: Close-up of bullet-shaped ice cubes, highlighting the daily production capacity of 18 lbs and 9 pieces per cycle.

1. Ensure the unit is plugged in and has sufficient water in the reservoir.
2. Press the "Make Ice" button on the control panel. The ice indicator light will illuminate.
3. The unit will begin producing ice cubes. Each cycle takes approximately 6-8 minutes, producing 9 bullet-shaped ice cubes.
4. The ice maker will automatically stop when the ice storage bin is full (Ice Fill indicator will light up) or when there is insufficient water.
5. The unit does not keep ice frozen indefinitely. Melted ice water is recycled back into the system for new ice production.

6. Údržba a čištění

Regular cleaning ensures hygienic operation and extends the life of your dispenser.

6.1 Čištění odkapávací misky

The dispenser is equipped with a removable drip tray for easy cleaning.

1. Pull the drip tray forward to remove it from the unit.
2. Empty any accumulated water.
3. Wash the drip tray with mild soap and warm water. Rinse thoroughly.
4. Dry completely before reinserting into the dispenser.

6.2 Obecné čištění

• Otřete vnější část dávkovače měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Clean the ice storage bin periodically with a clean cloth and mild soap. Rinse thoroughly and dry before replacing.

6.3 Odvápňování (doporučeno každoročně)

Mineral deposits can build up over time. Descaling helps maintain performance.

1. Odpojte dávkovač a vyjměte láhev s vodou.
2. Prepare a descaling solution (e.g., a mixture of white vinegar and water, or a commercial descaling agent).
3. Nalijte roztok do vodní nádrže.
4. Nechte roztok působit 30 minut až hodinu.
5. Drain the solution completely from the dispenser. You may need to dispense it through the faucets.
6. Rinse the system thoroughly by filling the reservoir with clean water and dispensing it until no vinegar smell remains. Repeat several times.

7. Řešení problémů

If you experience issues with your dispenser, refer to the following common problems and solutions:

8. Specifikace

Detailed technical specifications for your SOOPYK Water Cooler Dispenser.

Image 8.1: Diagram showing the dimensions of the water cooler (12.2"D x 14.49"W x 40.83"H) and highlighting features like fast ice making, silent operation, water empty/ice full indicator, and touch operation.

9. Záruka a zákaznická podpora

SOOPYK is committed to providing high-quality products and excellent customer service. For warranty information, technical assistance, or any questions regarding your water cooler dispenser, please contact SOOPYK customer support through the retailer's platform or the official SOOPYK website. Please have your model number (B0B7GC7LDV) and purchase date ready when contacting support.