LFF Atomic Clock with Indoor/Outdoor Temperature & Humidity

Zavedení

Thank you for choosing the LFF Atomic Clock. This device provides accurate time, date, indoor and outdoor temperature, and humidity readings. It features automatic time synchronization via the WWVB radio signal and a large, easy-to-read LCD display. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your product.

Vlastnosti produktu

• Atomová synchronizace času: Automatically synchronizes with the WWVB radio signal from Fort Collins, Colorado, ensuring precise time and date.
• Velký LCD displej: 15-inch display with 4.5-inch numbers for easy readability, suitable for various environments.
• Komplexní informace: Displays time (12/24H), calendar (month, date, day of week), alarm status, indoor temperature (°C/°F), indoor humidity, outdoor temperature (°C/°F), and outdoor humidity.
• Bezdrátový venkovní senzor: Transmits outdoor temperature and humidity data up to 328 feet (100 meters). The sensor has an IPX4 splash-proof rating.
• Více časových pásem: Supports 8 time zones: EST, CST, MST, PST, AKT, HST, AST, NST.
• Provoz na baterie: Main clock requires 4 AA batteries, and the outdoor sensor requires 2 AAA batteries (batteries not included).
• Všestranné umístění: Can be wall-mounted using three hanging holes or placed on a tabletop using the integrated stand.

Obrázek 1: Přesview of LFF Atomic Clock features.

Obsah balení

• 1 x LFF Atomic Clock (Model LWC100)
• 1 x Bezdrátový venkovní senzor
• 1 x Návod k použití

Konec produktuview

Main Unit (Atomic Clock)

Figure 2: Rear panel of the LFF Atomic Clock.

• Pouzdro na baterii: Compartment for 4 AA batteries.
• Tlačítko SET: Enters setting mode for time, date, and other parameters.
• Tlačítko ALARM: Activates/deactivates the alarm and enters alarm setting mode.
• Tlačítko NAHORU: Adjusts values upwards in setting mode.
• DOWN/RCC Button: Adjusts values downwards in setting mode. Press and hold to manually initiate WWVB signal reception.
• Tlačítko KANÁL: Přepíná mezi kanály venkovních senzorů (pokud je použito více senzorů).
• Hang Holes (x3): Pro montáž na stěnu.
• Stojan na stůl: Pro umístění na stůl.

Bezdrátový venkovní snímač

The outdoor sensor is a compact unit designed to measure external temperature and humidity. It features a small LCD display for local readings and a battery compartment for 2 AAA batteries. The sensor is splash-proof (IPX4).

Nastavení

1. Instalace baterie

Ensure you have 4 AA batteries for the main clock and 2 AAA batteries for the outdoor sensor (not included).

1. Pro venkovní senzor: Open the battery compartment cover on the back of the sensor. Insert 2 AAA batteries, observing the correct polarity (+/-). Close the cover securely.
2. Pro hlavní hodiny: Open the battery compartment cover on the back of the clock. Insert 4 AA batteries, observing the correct polarity (+/-). Close the cover securely.

Upon battery insertion, the clock will power on and perform an initial self-check. The display will illuminate, and it will begin searching for the WWVB atomic time signal.

Figure 3: Battery requirements for the clock and sensor.

2. Atomic Time Synchronization (WWVB)

The clock will automatically attempt to receive the WWVB signal after battery installation. A signal tower icon will flash on the display, indicating it is searching. This process can take several minutes to several hours, depending on your location and environmental conditions. For best reception, place the clock near a window, away from electronic interference.

Once the signal is successfully received, the signal tower icon will become solid, and the clock will display the correct time and date for the default time zone (PST).

Figure 4: Atomic time synchronization via WWVB signal.

3. Manual Time Zone Setting

If the clock does not automatically set to your local time zone, or if you wish to change it:

1. Stiskněte a podržte SOUBOR button for approximately 3 seconds to enter setting mode.
2. The time zone will begin to flash. Use the UP or DOLŮ/RCC buttons to select your desired time zone (EST, CST, MST, PST, AKT, HST, AST, NST).
3. Stiskněte SOUBOR znovu pro potvrzení a přechod k dalšímu nastavení.

4. Výběr jednotky teploty (°C/°F)

To switch between Celsius and Fahrenheit for temperature display:

• Krátce stiskněte DOLŮ/RCC button while in normal display mode. The temperature unit will toggle between °C and °F.

5. Umístění venkovního senzoru

For accurate outdoor readings, place the wireless sensor in a sheltered location that is protected from direct sunlight and rain. The transmission range is up to 328 feet (100 meters) in open air. Avoid placing it near large metal objects or other electronic devices that could interfere with the signal.

Figure 5: Wireless transmission range and sensor placement.

Návod k obsluze

1. Zobrazení informací

Velký LCD displej zobrazuje následující informace:

• Horní řádek: PM indicator, Time (hours:minutes), Zz (snooze icon), DST (Daylight Saving Time) indicator, Atomic signal icon, Time Zone.
• Střední řada: Date (month-day-year), Day of the week.
• Spodní řádek: Indoor temperature, Indoor humidity, Channel indicator, Outdoor temperature, Outdoor humidity.

2. Funkce alarmu

Chcete-li nastavit budík:

1. Stiskněte a podržte POPLACH tlačítko po dobu 3 sekund. Hodina budíku bude blikat.
2. Použijte UP or DOLŮ/RCC tlačítka pro nastavení hodiny. Stiskněte POPLACH potvrdit.
3. The alarm minute will flash. Use the UP or DOLŮ/RCC pro nastavení minut. Stiskněte POPLACH pro potvrzení a ukončení nastavení budíku.

Pro aktivaci/deaktivaci budíku:

• Krátce stiskněte POPLACH button. The alarm icon will appear or disappear on the display, indicating its status.

To use the snooze function:

• Když zazní budík, stiskněte libovolné tlačítko (kromě POPLACH) to activate snooze. The alarm will sound again after approximately 5 minutes.
• Chcete-li alarm úplně zastavit, stiskněte tlačítko POPLACH tlačítko.

3. Manual Time Setting (If WWVB Signal is Unavailable)

In areas where the WWVB signal cannot be received, you can manually set the time and date:

1. Stiskněte a podržte SOUBOR tlačítko na 3 sekundy pro vstup do režimu nastavení.
2. Opakovaně stiskněte SOUBOR to cycle through the settings (Time Zone, DST ON/OFF, 12/24H format, Hour, Minute, Year, Month, Day, Temperature Unit).
3. Použijte UP or DOLŮ/RCC tlačítky upravte blikající hodnotu pro každé nastavení.
4. Stiskněte SOUBOR to confirm each adjustment and move to the next.
5. After setting the last parameter, press SOUBOR znovu pro opuštění režimu nastavení.

Údržba

1. Výměna baterie

When the battery indicator appears on the display, it is time to replace the batteries. Replace all batteries in the main clock and/or outdoor sensor simultaneously with new ones of the same type. Do not mix old and new batteries or different battery types.

For outdoor sensors in temperatures below -4°F, lithium batteries are recommended for optimal performance.

2. Čištění

Hodiny a senzor otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit displej nebo...asing.

Odstraňování problémů

Specifikace

Záruka a podpora

LFF products are designed for quality and reliability. If you encounter any quality problems with your LFF Atomic Clock, please contact our customer support team for assistance. Please refer to your purchase documentation for specific warranty terms and contact information.

For further support, visit the official LFF store on Amazon: LFF Store