FORSINING AH691 Men's Automatic Watch User Manual

1. Úvod

This manual provides comprehensive instructions for the proper use, setup, and maintenance of your FORSINING AH691 Men's Automatic Watch. Please read this guide thoroughly to ensure optimal performance and longevity of your timepiece.

2. Konec produktuview

The FORSINING AH691 is an automatic mechanical watch featuring a multi-function dial with day, date, and moon phase indicators. It is powered by the natural motion of your wrist.

Obrázek 2.1: Přední strana view of the FORSINING AH691 watch, showcasing the main dial, subdials, and diamond-set bezel.

Obrázek 2.2: Zadní view of the FORSINING AH691 watch, displaying the transparent case back and the automatic mechanical movement.

Komponenty:

• Koruna: Used for winding the watch and setting the time.
• Posunovače: Used for adjusting specific functions (e.g., day, date, moon phase).
• Hlavní ciferník: Zobrazuje hodiny, minuty a sekundy.
• Subciferníky: Indicate day of the week, date, and a 24-hour/moon phase display.
• Zadní část pouzdra: Stainless steel with a transparent window to view automatický pohyb.
• Popruh: Leather strap with a buckle clasp.

3. Pokyny k nastavení

3.1 Počáteční vinutí

As an automatic watch, the AH691 powers itself through the motion of your wrist. However, for initial use or after a period of inactivity, manual winding is recommended to ensure sufficient power reserve.

1. Ujistěte se, že je korunka zcela zatlačena (poloha 0).
2. Rotate the crown clockwise approximately 15-20 times. This will provide an initial power reserve.
3. The watch will then continue to wind automatically with regular wear.

3.2 Nastavení času

1. Gently pull the crown out to Position 2 (the outermost position). The second hand may stop.
2. Rotate the crown to move the hour and minute hands clockwise until the desired time is set. When setting the time, advance the hands past 12 o'clock to determine if it is AM or PM for correct date change.
3. Jakmile je čas nastaven, zatlačte korunku zpět do polohy 0.

3.3 Setting Day, Date, and Moon Phase

The AH691 features dedicated pushers for adjusting the day, date, and moon phase indicators.

1. Úprava data: Locate the pusher on the side of the watch corresponding to the date subdial. Use a small, non-metallic tool (e.g., a toothpick) to gently press this pusher until the correct date is displayed.
2. Day Adjustment: Locate the pusher on the side of the watch corresponding to the day subdial. Gently press this pusher until the correct day of the week is displayed.
3. Moon Phase/24-Hour Adjustment: Locate the pusher on the side of the watch corresponding to the moon phase/24-hour subdial. Gently press this pusher to advance the indicator until the desired moon phase or 24-hour time is shown.
4. Důležité: Avoid adjusting the date or day between 9 PM and 3 AM, as this is when the watch's internal mechanisms are engaged in changing these indicators, and manual adjustment can cause damage.

4. Návod k obsluze

4.1 Automatický pohyb

Your FORSINING AH691 watch is equipped with an automatic mechanical movement. This means it does not require a battery. The movement of your arm causes an oscillating weight inside the watch to rotate, winding the mainspring and powering the watch.

• For continuous operation, wear the watch for at least 8-10 hours daily.
• If the watch stops due to insufficient movement, manually wind it as described in Section 3.1.

4.2 Subdial Functions

• Denní subciferník: Označuje aktuální den v týdnu (např. PO, ÚT).
• Subciferník data: Zobrazuje aktuální číselné datum.
• Moon Phase/24-Hour Subdial: This subdial typically tracks a 24-hour cycle, often incorporating a visual representation of the moon's phase or a sun/moon indicator for AM/PM.

5. Údržba

5.1 Čištění

• Wipe the watch case and crystal with a soft, dry cloth regularly to remove dust and fingerprints.
• U koženého řemínku se vyvarujte delšího vystavení vodě, přímému slunečnímu záření a agresivním chemikáliím, abyste zabránili jeho poškození a změně barvy.

5.2 Voděodolnost

The FORSINING AH691 watch features a water-resistant structure. However, it is not suitable for swimming, diving, showering, or any activities involving prolonged water immersion or high-pressure water exposure. Exposure to steam or hot water can also compromise the seals.

• Avoid pressing pushers or pulling the crown when the watch is wet.
• If the watch comes into contact with water, wipe it dry immediately with a soft cloth.

5.3 Skladování

When not wearing your watch for an extended period, store it in a cool, dry place away from direct sunlight and strong magnetic fields.

6. Řešení problémů

• Hodinky se zastavily: The watch may have run out of power reserve. Manually wind the watch (Section 3.1) and wear it regularly.
• Čas je nesprávný: Reset the time as described in Section 3.2. Ensure the crown is fully pushed in after setting.
• Date/Day is incorrect: Adjust the date/day using the dedicated pushers (Section 3.3). Remember to avoid adjustment between 9 PM and 3 AM.
• Kondenzace pod krystalem: This may indicate a breach in water resistance. Avoid further water exposure and contact customer support.

7. Specifikace

8. Záruka a podpora

8.1 Informace o záruce

Your FORSINING AH691 watch comes with a two-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.

Additionally, a 90-day manufacturer's promise is provided for returns related to initial defects.

8.2 Zákaznická podpora

For warranty claims, technical assistance, or any questions regarding your FORSINING watch, please contact the seller or FORSINING customer support. Refer to your purchase documentation for specific contact details.