Legrand LEG67766

Legrand Micromodule for Connected VMC with Netatmo

Model: LEG67766

1. Úvod

This instruction manual provides essential information for the safe installation, operation, and maintenance of your Legrand Micromodule for Connected VMC (Ventilation Mécanique Contrôlée) with Netatmo. This micromodule is designed to enable smart control of a single-flow, 2-speed VMC system, with a maximum power rating of 250W. It integrates seamlessly with the Home+Control application and wireless control devices, offering enhanced convenience and energy management for your ventilation system.

Před instalací a použitím si prosím pečlivě přečtěte tento návod a uschovejte si jej pro budoucí použití.

2. Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem

  • Installation must be performed by a qualified electrician in accordance with all national and local electrical codes and regulations.
  • Always disconnect power at the main circuit breaker before installing, servicing, or removing the device.
  • Do not install or use this device if it appears damaged.
  • Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
  • This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.

3. Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

  • Legrand Micromodule for Connected VMC
  • White cover (if applicable)
  • Návod k použití (tento dokument)

4. Nastavení a instalace

The Legrand Micromodule is designed to be installed as close as possible to the VMC unit it controls. Professional installation is highly recommended due to the electrical nature of the device.

4.1 Předinstalace

  1. Odpojit napájení: Turn off the main power supply to the VMC circuit at your electrical panel. Verify that the power is off using a voltage tester.
  2. Identifikace zapojení: Identify the power supply wires and the control wires for your 2-speed VMC system. Consult your VMC's manual if necessary.

4.2 Wiring the Micromodule

Follow the wiring diagram provided with the product packaging. Typically, the micromodule will connect to the main power supply and then to the VMC's speed control inputs (e.g., low speed and high speed). Ensure proper grounding.

Legrand Micromodule for Connected VMC with Netatmo, showing its compact design and wiring terminals.

Image 1: Legrand Micromodule for Connected VMC. This image displays the compact design of the micromodule, highlighting its size and the terminals for electrical connections. It is typically installed within an electrical box or near the VMC unit.

4.3 Pairing with Home+Control App

  1. Obnovit napájení: Once wiring is complete and secure, restore power to the circuit.
  2. Stáhnout aplikaci: Download the Legrand Home+Control application from your device's app store.
  3. Vytvořit účet: Otevřete aplikaci a vytvořte si účet nebo se přihlaste.
  4. Přidat zařízení: Follow the in-app instructions to add a new device. The app will guide you through the pairing process, which typically involves putting the micromodule into pairing mode (refer to the specific instructions in the app or product leaflet for exact steps, often involving a short press on a button on the module or a specific power cycle sequence).
  5. Nakonfigurujte: Once paired, you can configure the VMC speeds and integrate with other Netatmo-compatible devices.

5. Operating the Micromodule

The Legrand Micromodule allows for smart control of your 2-speed VMC system.

5.1 Via Home+Control App

  • Open the Home+Control app on your smartphone or tablet.
  • Navigate to the VMC device.
  • You will typically find options to switch between the two VMC speeds (e.g., 'Low' and 'High' or 'Normal' and 'Boost').
  • The app may also allow for scheduling, automation, and integration with other smart home scenarios.

5.2 Via Wireless Control (Optional)

If you have paired the micromodule with a compatible Legrand wireless control switch, you can operate the VMC speeds directly from the switch. Refer to the instructions provided with your wireless control for specific operation details.

6. Údržba

The Legrand Micromodule is designed for long-term, maintenance-free operation. However, consider the following:

  • Čištění: If the exterior of the module or its cover requires cleaning, ensure power is disconnected. Use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Aktualizace firmwaru: Periodically check the Home+Control app for available firmware updates for your micromodule. Updates can improve performance and add new features.
  • VMC Maintenance: Regular maintenance of your VMC system (e.g., filter cleaning/replacement) should be performed according to the VMC manufacturer's instructions.

7. Řešení problémů

If you encounter issues with your Legrand Micromodule, try the following steps:

  • Žádné napájení/žádná odezva:
    • Check the circuit breaker to ensure power is supplied to the VMC circuit.
    • Verify all wiring connections are secure (pouze pokud jste kvalifikovaný elektrikář).
  • Nelze spárovat s aplikací:
    • Ensure your smartphone is connected to the same Wi-Fi network as your Netatmo gateway (if applicable).
    • Restart the Home+Control app.
    • Try resetting the micromodule to factory settings (refer to the app or product leaflet for specific instructions).
    • Ensure the micromodule is within range of your Netatmo gateway or Wi-Fi network.
  • VMC Not Changing Speeds:
    • Verify the VMC itself is functioning correctly when directly controlled (if possible).
    • Check the wiring between the micromodule and the VMC's speed inputs.
    • Ensure the micromodule is correctly configured in the Home+Control app.

If problems persist, contact Legrand customer support or consult a qualified electrician.

8. Specifikace

VýrobceLegrand
Číslo modeluLEG67766
Číslo díluLEG67766
Rozměry produktu2.72 x 3.7 x 3.7 palce
Hmotnost položky2.65 unce
Maximální jmenovitý výkon250W
VMC TypeSingle flow, 2-speed
KompatibilitaHome+Control app, Netatmo ecosystem
Jsou vyžadovány baterieŽádný

9. Záruka a podpora

Legrand products are designed and manufactured to the highest quality standards. For information regarding the warranty period and terms for your Micromodule, please refer to the warranty card included with your product or visit the official Legrand webmísto.

For technical support, troubleshooting assistance, or to report a defective product, please contact Legrand customer service through their official webwebu nebo kontaktních informací uvedených v dokumentaci k produktu.

Oficiální Legrand Webmísto: www.legrand.com

Související dokumenty - LEG67766

Předview Instalační příručka pro mikromodul Legrand Connected Lighting 5742 43
Návod k instalaci a použití pro mikromodul propojeného osvětlení Legrand Arteor s technologií Netatmo (model 5742 43), včetně technických specifikací, schémat zapojení a bezpečnostních pokynů.
Předview Arteor s Netatmo: Průvodce produkty pro systém chytré domácnosti | Legrand
Prozkoumejte systém chytré domácnosti Arteor s Netatmo od společnosti Legrand. Objevte propojené osvětlení, žaluzie, zásuvky a řešení hlasového ovládání pro moderní bydlení, navržené pro snadné použití a elegantní estetiku.
Předview Průvodce instalací a používáním télérupteur connecté Legrand 412170
Podrobný průvodce instalací a používáním télérupteur connecté Legrand 412170, včetně kabeláže, konfigurace, technických specifikací a zabezpečení.
Předview Legrand 4 121 73 Instalační příručka pro suché kontakty
Komplexní instalační a uživatelská příručka pro modul Legrand 4 121 73 Connected Dry Contact s podrobným popisem jeho funkcí, požadavků na zapojení, bezpečnostních opatření a integrace s ekosystémem chytré domácnosti Legrand Home + Control.
Předview Legrand 2cestný propojený spínač s nulovým vodičem CB0416 - CN0416 - CT0416 Instalační návod
Pokyny k instalaci a technické specifikace pro dvoucestný propojený vypínač Legrand s nulovým vodičem (CB0416, CN0416, CT0416), příslušenství pro chytrou domácnost kompatibilní s Netatmo.
Předview Instalační a uživatelská příručka pro stykače Legrand Connected
Komplexní návod k instalaci a používání stykače Legrand Connected (4 121 71 - 1 991 22) s technologií Netatmo, zahrnující zapojení, nastavení a provoz.