1. Úvod a produktview
Thank you for choosing the ULTIMATE SPEED® Hydraulic Bottle Jack. This robust and reliable jack is designed for safely lifting vehicles and other heavy objects up to a maximum capacity of 3000 kg (3 tons). Its compact design and easy operation make it an essential tool for automotive maintenance and repair.
Please read this manual thoroughly before operating the jack to ensure safe and efficient use. Keep this manual for future reference.
2. Bezpečnostní pokyny
VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k vážnému zranění, smrti nebo poškození majetku.
- Always operate the jack on a hard, level, and stable surface. Avoid uneven ground or soft surfaces.
- Never exceed the rated lifting capacity of 3000 kg.
- Always use appropriate jack stands to support the vehicle immediately after lifting. Never work under a vehicle supported only by the hydraulic jack.
- Před zvedáním se ujistěte, že je zatažená parkovací brzda vozidla a kola jsou zajištěna klíny.
- Position the jack only at the vehicle manufacturer's recommended lifting points. Consult your vehicle's owner's manual.
- Keep hands, feet, and other body parts clear of moving parts and the area under the load.
- Zvedák neupravujte ani jej nepoužívejte k jiným účelům, než ke kterým je určen.
- If the jack shows signs of damage or malfunction, do not use it. Contact qualified service personnel.
- Používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
3. Obsah balení
Carefully unpack all items and check for any damage. If any parts are missing or damaged, do not use the product and contact customer support.
- 1 x ULTIMATE SPEED® Hydraulic Bottle Jack
- 1 x Two-piece Lifting Handle
4. Vlastnosti produktu
- Vysoká kapacita: Lifts up to 3000 kg (3 tons).
- Nastavitelná výška zdvihu: Approximately 11.5 cm stroke.
- Gentle Lowering: Equipped with a precise release valve for controlled descent.
- Bezpečné uchopení: Features a profiled saddle for stable contact with the load.
- Prostorově úsporný design: Comes with a two-piece lifting handle for compact storage.
- Ochrana proti přetížení: Integrated safety valve prevents lifting beyond rated capacity.
- Kompaktní rozměry: Minimum height approx. 185 mm, maximum height approx. 360 mm.
- lehký: Weighs approximately 2.9 kg (with lifting rod).
5. Nastavení
- Rozbalit: Remove the hydraulic bottle jack and its components from the packaging.
- Sestavte rukojeť: Insert the smaller section of the lifting handle into the larger section. The handle is used for both pumping and operating the release valve.
- Počáteční kontrola: Before first use, inspect the jack for any visible damage, leaks, or loose parts. Do not use if damaged.
- Bleed Air (Recommended): To ensure optimal performance, it is recommended to bleed any trapped air from the hydraulic system.
- Otočte vypouštěcí ventil proti směru hodinových ručiček, abyste jej zcela otevřeli.
- Pump the handle several times to extend and retract the ram fully.
- Close the release valve by turning it clockwise. The jack is now ready for use.
6. Provoz
6.1. Lifting the Vehicle
- Připravte vozidlo: Zaparkujte vozidlo na pevném a rovném povrchu. Zatáhněte parkovací brzdu a na kola, která zůstanou na zemi, umístěte klíny.
- Pozice Jacka: Locate the vehicle manufacturer's recommended lifting point. Place the hydraulic jack directly under this point, ensuring the saddle is centered and making full contact with the lifting surface.
- Zavřete vypouštěcí ventil: Insert the slotted end of the lifting handle onto the release valve and turn it clockwise until it is firmly closed. Do not overtighten.
- Lift Load: Insert the handle into the pump sleeve. Pump the handle up and down steadily to raise the jack ram and lift the vehicle to the desired height.
- Bezpečné zatížení: Immediately after lifting, place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands (see 6.2 Lowering the Vehicle) and remove the hydraulic jack. Never work under a vehicle supported only by the jack.
6.2. Spuštění vozidla
- Prepare for Lowering: If the vehicle is on jack stands, slightly raise the vehicle with the hydraulic jack to relieve pressure from the jack stands. Remove the jack stands.
- Otevřený vypouštěcí ventil: Slowly and carefully turn the release valve counter-clockwise using the slotted end of the lifting handle. The vehicle will begin to descend. Control the descent speed by adjusting how much you open the valve.
- Úplně dolů: Continue to open the valve until the vehicle is fully lowered to the ground.
- Odstraňte Jacka: Once the vehicle is fully lowered and stable, remove the hydraulic jack.
7. Údržba
Regular maintenance ensures the longevity and safe operation of your hydraulic jack.
- Čištění: Keep the jack clean and free of dirt, grease, and debris. Wipe down the ram and pump mechanism after each use.
- Mazání: Periodically lubricate pivot points and moving parts with light machine oil.
- Hydraulická kapalina: Check the hydraulic fluid level periodically. If low, add high-quality hydraulic jack oil. Do not use brake fluid or motor oil. (Note: Access to fluid reservoir may vary by model and may require professional service).
- Skladování: Store the jack in a dry, clean place with the ram fully retracted to prevent corrosion and extend seal life.
- Inspekce: Before each use, inspect the jack for any signs of damage, wear, or leaks. Pay attention to the ram, seals, and base.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jack nezvedne náklad. | Release valve is open. Nízká hladina hydraulické kapaliny. Vzduch v hydraulickém systému. Přetížení. | Úplně zavřete vypouštěcí ventil. Check and refill fluid. Bleed air from system (see Setup). Reduce load; do not exceed 3000 kg. |
| Jack zvedá pomalu nebo nepravidelně. | Nízká hladina hydraulické kapaliny. Vzduch v hydraulickém systému. | Check and refill fluid. Bleed air from system (see Setup). |
| Jack lowers too quickly. | Release valve opened too far. Vnitřní netěsnost. | Control descent by slowly opening valve. Kontaktujte kvalifikovaný servisní personál. |
| Jack se nesníží. | Release valve stuck or not fully open. | Ensure valve is fully open. Check for obstructions. |
Pokud narazíte na problémy, které zde nejsou uvedeny, nebo pokud řešení problém nevyřeší, kontaktujte prosím zákaznickou podporu.
9. Specifikace
| Atribut | Hodnota |
|---|---|
| Značka | Maximální rychlost |
| Model | Wagenheber5442 |
| Výrobce | ULTIMATE SPEED® |
| Kapacita zatížení | 3000 kg (3 tons) |
| Minimální výška | Přibl. 185 mm |
| Maximální výška | Přibl. 360 mm |
| Zdvihový zdvih | Přibl. 11.5 cm |
| Hmotnost položky | Approx. 2.9 kg (with lifting rod) |
| Rozměry balení | 19.3 x 12.1 x 10.8 cm |
| Barva | Červený |
| Automotive Installation Type | Univerzální |
10. Záruka a podpora
Your ULTIMATE SPEED® Hydraulic Bottle Jack is manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact the retailer where the product was purchased.
For technical support, spare parts, or service inquiries, please contact the manufacturer or your local distributor. Keep your purchase receipt as proof of purchase.
Obrázky produktů
