ECOELER Motion Sensor Light Switch (Model YM2106-WH) Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER Motion Sensor Light Switch. This device offers hands-free lighting control by detecting presence and activating lights, enhancing convenience and energy efficiency in areas such as bathrooms, closets, and garages.

Obrázek 1: Přední strana view of the ECOELER Motion Sensor Light Switch.

2. Co je v krabici

• Spínač snímače pohybu
• Nástěnná deska
• Installation Accessories (e.g., wire nuts, screws)

Figure 2: Components included with the motion sensor light switch.

3. Nastavení a instalace

3.1 Důležité bezpečnostní informace

• VAROVÁNÍ: Abyste předešli požáru, úrazu elektrickým proudem nebo smrti, vypněte napájení jističem nebo pojistkovou skříňkou a před zapojováním zkontrolujte, zda je napájení vypnuté.
• This switch is designed for single-pole installations only. It is not suitable for 3-way installations.
• A proper GROUND wire is required for the switch to function correctly.
• Compatible with 300W LED/CFL and 600W incandescent light bulbs.

3.2 Průvodce zapojením

1. Vypněte napájení jističem.
2. Odstraňte stávající nástěnnou desku a vypínač.
3. Identify the wires: Power (Hot/Black), Load (Red), and Ground (Green). This switch does not require a neutral wire.
4. Connect the wires from the wall box to the corresponding wires on the ECOELER switch using the provided wire nuts:
   • Black wire from wall box (Hot) to Black wire on switch.
   • Red wire from wall box (Load to light/fan) to Red wire on switch.
   • Green or non-insulated copper wire from wall box (Ground) to Green wire on switch.
5. Opatrně zasuňte kabelový vypínač do nástěnné krabice.
6. Připevněte nástěnnou desku.
7. Obnovte napájení na jističi.

Figure 3: Wiring diagram for the ECOELER Motion Sensor Light Switch.

4. Návod k obsluze

4.1 provozních režimů

The ECOELER Motion Sensor Light Switch offers two primary operation modes: Occupancy (OCC) and Vacancy (VAC).

• Occupancy (OCC) Mode: Lights automatically turn ON when motion is detected and turn OFF when the area is unoccupied after a set delay.
• Volný režim (VAC): Lights require manual activation (turn ON) but will automatically turn OFF when the area is unoccupied after a set delay. This mode is ideal for rooms with sporadic motion or frequently forgotten spaces.

Figure 4: Occupancy (OCC) and Vacancy (VAC) mode selection.

4.2 Přizpůsobitelná nastavení

The switch features adjustable dials for Time Delay, Sensitivity, and Light Level. These settings are accessible by gently prying off the front cover of the switch (refer to Figure 5).

1. Adjustable Time Delay (TIME): Sets how long the lights remain ON after the last detected motion. Options range from 15 seconds to 30 minutes.
2. Adjustable Sensitivity (SENSE): Controls the motion sensor's detection range and responsiveness, from 20% to 100%. Adjust this based on room size and desired detection area.
3. Adjustable Light Level (LIGHT): Determines the ambient light threshold for the sensor to activate. This allows the lights to remain OFF if there is sufficient natural light, saving energy.

Figure 5: Customizable settings for Time, Sense, and Light.

5. Údržba

The ECOELER Motion Sensor Light Switch requires minimal maintenance. Keep the sensor lens clean and free from dust or obstructions to ensure optimal performance. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.

6. Řešení problémů

• Lights not turning ON: Check the circuit breaker. Ensure wiring connections are secure. Verify the sensitivity and light level settings are appropriate for the environment.
• Lights not turning OFF: Adjust the time delay setting. Ensure there are no constant movements within the sensor's range. Check if the switch is in Occupancy (OCC) mode and if the light level setting is too high, preventing it from turning off in bright conditions.
• Sensor too sensitive/not sensitive enough: Adjust the 'SENSE' dial to increase or decrease detection range.
• Přerušovaný provoz: Ensure the sensor lens is clean and unobstructed. Verify proper grounding.

7. Specifikace

8. Záruka a podpora

The ECOELER Motion Sensor Light Switch is backed by a 1-letá záruka. For any inquiries or support regarding your sensor switch, please contact ECOELER customer service for assistance. A response is typically provided within 24 hours.