EMKE SFTR7640X1A-ADR Bathroom Radiator Towel Warmer Instruction Manual

1. Úvod

Thank you for choosing the EMKE SFTR7640X1A-ADR Bathroom Radiator Towel Warmer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new towel warmer. Please read these instructions carefully before installation and retain them for future reference.

Bezpečnostní informace

• Instalaci musí provést kvalifikovaný odborník v souladu s místními stavebními a instalatérskými předpisy.
• Před zahájením jakékoli instalace nebo údržby se ujistěte, že je přívod vody uzavřen.
• Do not operate the towel warmer if it is damaged.
• Keep children away from the towel warmer during operation as surfaces can become hot.
• This product is designed for heating towels and providing ambient warmth in bathrooms. Do not use it for purposes other than its intended use.

2. Konec produktuview

The EMKE SFTR7640X1A-ADR is a flat bathroom radiator designed for efficient towel warming and supplementary room heating. Its anthracite finish and modern design complement various bathroom aesthetics.

Obrázek 2.1: The EMKE towel warmer providing cozy warmth and featuring high thermal conductivity for efficient heating.

Klíčové vlastnosti:

• Vysoká tepelná vodivost: Designed for rapid and effective heat distribution.
• Nastavitelná vzdálenost od stěny: Allows for flexible installation and optimal spacing from the wall.
• Vysoce kvalitní materiály: Constructed from SPCC steel with an environmentally friendly coating for durability and safety.
• 360° Welding Process: Ensures a robust and leak-proof construction.

Obrázek 2.2: Close-up showing the adjustable wall distance from 99-115mm, the use of high-quality SPCC steel with an environmental protection coating, and the 360° welding process designed to prevent water leakage.

3. Specifikace

Dimensions and Performance Table

Obrázek 3.1: Technical drawing illustrating the dimensions and connection points, alongside a table detailing performance specifications for various sizes of EMKE towel warmers. This specific model is 762mm high and 400mm wide.

4. Nastavení a instalace

This section outlines the general steps for installing your EMKE towel warmer. Professional installation is highly recommended.

4.1 Kontroly před instalací

• Verify all components listed in the 'Included Components' section are present.
• Ensure you have the necessary tools and additional parts (e.g., valves, not included).
• Confirm the chosen installation location is suitable and the wall can support the weight of the radiator when filled with water.

4.2 Montáž chladiče

1. Mark the drilling points on the wall according to the radiator's dimensions and the mounting bracket positions.
2. Drill holes and insert the provided dowels.
3. Attach the mounting brackets securely to the wall using the long screws.
4. Mount the radiator onto the brackets, ensuring it is level and stable.

4.3 Připojení vody

The radiator features a universal G1/2" thread with a 50mm connection distance, allowing for flexible left or right side connection.

Obrázek 4.1: Illustration of the flexible connection options (left or right) and a detailed view of the G1/2" universal thread with a 50mm connection distance. Note that valves are not included.

1. Connect the water inlet and outlet pipes to the radiator using appropriate valves (not included). Ensure all connections are sealed properly to prevent leaks.
2. The towel dryer can be installed upside down, allowing connections on either the left or right side.
3. Once connections are secure, slowly open the water supply to fill the radiator.
4. Bleed any air from the system using the bleed valve (if applicable to your valve setup) until water flows out steadily.

4.4 Dodávané příslušenství

Obrázek 4.2: The mounting kit includes 4 blind plugs, 4 dowels, 4 long screws, and 4 small screws. Valves are not included. The image also shows the four-layer packaging for product protection.

• 4 x Blind Plugs
• 4 x Hmoždinky
• 4 x dlouhé šrouby
• 4 x malé šrouby

5. Provoz

Once installed and filled with water, your EMKE towel warmer is ready for operation.

5.1 Funkce ohřevu

• The towel warmer integrates with your central heating system. Adjust the flow of hot water through the radiator using the installed valves.
• Recommended water inlet/outlet temperatures are 75°C / 65°C for optimal performance.
• The radiator will heat up, providing warmth to your bathroom and drying towels placed on its bars.

5.2 Sušení ručníků

Hang towels evenly over the bars of the radiator. Avoid overcrowding to ensure efficient drying and heat distribution.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a efektivní provoz vašeho ohřívače ručníků.

6.1 Čištění

• Clean the surface of the radiator regularly with a soft, damp tkanina.
• Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the anthracite finish.
• For stubborn marks, use a mild soap solution and wipe thoroughly.

6.2 Kontroly systému

• Periodically check for any signs of leaks around the connections.
• Ensure the system is properly bled of air to maintain heating efficiency.

7. Řešení problémů

If you encounter issues with your EMKE towel warmer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact a qualified plumber or the EMKE customer support.

8. Záruka a podpora

Výrobky EMKE jsou vyráběny podle vysoce kvalitních standardů. Konkrétní informace o záruce naleznete v záručním listu, který je součástí vašeho produktu, nebo navštivte oficiální webové stránky EMKE. webUschovejte si doklad o koupi pro případ reklamace.

Zákaznická podpora

For technical assistance, spare parts, or any other inquiries, please contact EMKE customer support through the contact information provided on your purchase documentation or the official EMKE webmísto.