1. Úvod a produktview
The Einhell Power X-Car Charger 3A is designed to quickly charge all batteries within the Einhell Power X-Change system series. This charger provides flexibility by allowing you to charge your Power X-Change batteries directly from your vehicle's 12V power outlet, making it ideal for use in cars, caravans, or other mobile environments.
Mezi klíčové vlastnosti patří:
- Nabíjení mobilu: Equipped with a 12V plug for charging PXC batteries on the go.
- Univerzální kompatibilita: Compatible with all batteries in the Power X-Change series.
- Intelligent Charging Management: Continuously monitors batteries for optimal charging and safety.
- Ochrana autobaterie: Vlastnosti 2-stage protection electronics with an LED indicator to ensure your car battery remains capable of starting the vehicle.
- Technologie rychlého nabíjení: 3-amp fast charging for short charging times.
- Režim obnovení: Reactivates deeply discharged batteries.
- Stavový LED indikátor: Provides comprehensive information on charging status and battery condition via a 7-way LED display.
Figure 1: The Einhell Power X-Car Charger 3A with its 12V plug.
2. Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- 1 x Einhell Power X-Car Charger 3A
Pokud některé položky chybí nebo jsou poškozené, kontaktujte prosím zákaznickou podporu.
3. Bezpečnostní pokyny
Při používání nabíječky vždy dodržujte následující bezpečnostní opatření:
- Před použitím si přečtěte všechny pokyny.
- Nevystavujte nabíječku dešti nebo mokru.
- Use only with Einhell Power X-Change batteries.
- Během nabíjení zajistěte řádné větrání.
- Nepokoušejte se nabíječku rozebírat nebo upravovat.
- Uchovávejte mimo dosah dětí.
- Disconnect from power source when not in use or before cleaning.
4. Nastavení
To set up your Einhell Power X-Car Charger 3A:
- Připojení k napájení vozidla: Insert the 12V plug of the charger firmly into your vehicle's 12V accessory socket (cigarette lighter socket). Ensure the connection is secure.
- Vložte baterii: Slide your Einhell Power X-Change battery into the charging slot on the charger. Ensure it clicks into place.
- Sledujte indikátory: LED indikátory na nabíječce se rozsvítí, aby signalizovaly stav nabíjení.
Figure 2: Connecting the charger to a vehicle's 12V power outlet.
Figure 3: The charger converts 12V vehicle power to 18V for battery charging.
5. Návod k obsluze
Once the charger is connected and a battery is inserted, the intelligent charging management system will begin the charging process. The 7-way status LED indicator provides real-time feedback:
- Stav nabíjení: LEDs indicate the current charge level of the battery.
- Nabíjení dokončeno: An LED will indicate when the battery is fully charged.
- Fault/Error: Specific LEDs will light up to indicate potential issues such as overheating or a defective battery.
- Režim obnovení: If a deeply discharged battery is inserted, the charger may automatically enter refresh mode to reactivate it. This process can take some time.
Figure 4: Close-up of the 7-way status LED display on the charger.
Ochrana autobaterie
The charger incorporates a 2-stage protection electronics system for your vehicle's battery. This system monitors the vehicle's battery voltage and will prevent excessive discharge, ensuring that your car can still be started. An LED indicator will provide status on the car battery protection.
Figure 5: Icon representing the car battery protection feature.
6. Údržba
To ensure the longevity and optimal performance of your Einhell Power X-Car Charger 3A:
- Čištění: Disconnect the charger from all power sources and batteries before cleaning. Use a dry, soft cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- Skladování: Store the charger in a dry place, away from direct sunlight and extreme temperatures.
- Inspekce: Periodically inspect the charger and its cables for any signs of damage. Do not use if damaged.
7. Řešení problémů
Pokud narazíte na problémy s nabíječkou, zvažte následující běžná řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nabíječka se nezapíná. | No power from 12V socket; loose connection. | Check vehicle's 12V socket for power; ensure plug is fully inserted. |
| Baterie se nenabíjí. | Battery not properly inserted; battery is defective; charger fault. | Re-insert battery; try a different battery; observe LED indicators for fault codes. |
| Car battery protection LED active. | Autobaterie objtage je nízké. | The charger is protecting your car battery. Charging may pause or slow down. Start the vehicle if necessary. |
| Refresh mode active for a long time. | Battery is deeply discharged. | This is normal for deeply discharged batteries. Allow the process to complete. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte prosím zákaznickou podporu Einhell.
8. Specifikace
| Atribut | Hodnota |
|---|---|
| Číslo modelu | 4512113 |
| Vstupní objemtage | 12 Volts (DC, via car plug) |
| Výstupní objemtage | 18 voltů |
| Nabíjecí proud | 3 Amps |
| Rozměry produktu (D x Š x V) | 4.21 x 5.08 x 2.36 palce (10.69 x 12.90 x 5.99 cm) |
| Hmotnost položky | 10.6 unce (0.3 kilogramů) |
| Barva | Červená/Černá |
| Výrobce | Einhell Germany AG |
9. Záruka a podpora
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly.
Einhell Customer Service:
- Please refer to your regional Einhell webstránky pro kontaktní údaje.
