Návod k obsluze stolního NAS serveru QNAP TS-233-US se 2 šachtami

1. Úvod

The QNAP TS-233-US is a 2-bay Network Attached Storage (NAS) device designed for home and small office environments. It features an ARM Cortex-A55 quad-core processor and 2 GB DDR4 RAM, providing a centralized solution for file storage, multimedia streaming, and data backup. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your NAS device.

Obrázek 1: Přední strana view of the QNAP TS-233-US 2-Bay Desktop NAS.

2. Klíčové vlastnosti

• ARM Cortex-A55 quad-core 2.0GHz processor with 2 GB DDR4 RAM for efficient performance.
• Budget-friendly home NAS for centralized file storage and multimedia streaming.
• Centrally store and organize personal or family photos, music, and videos.
• Mitigate the threat of ransomware with QNAP's storage snapshot technology.
• Effortlessly backup your Windows Computers with QNAP’s NetBak Replicator software and Mac computers with Time Machine.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• NAS jednotka TS-233
• Ethernetový kabel (RJ45)
• AC adaptér a napájecí kabel
• Průvodce rychlou instalací
• Drive Screws (for 3.5-inch and 2.5-inch drives)

4. Nastavení

4.1. Instalace pevného disku

The TS-233-US supports two 3.5-inch or 2.5-inch SATA 6Gb/s HDDs or SSDs. Follow these steps to install your drives:

1. Carefully slide open the NAS enclosure.
2. Insert your chosen hard drives or SSDs into the drive bays.
3. Secure the drives using the provided screws.
4. Close the NAS enclosure securely.

Obrázek 2: Strana view of the QNAP TS-233-US, illustrating the internal drive bays.

4.2. Connecting the NAS

Connect the NAS to your network and power source:

1. Connect one end of the Ethernet cable to the Gigabit Ethernet port on the back of the NAS.
2. Připojte druhý konec ethernetového kabelu k routeru nebo síťovému přepínači.
3. Connect the AC adapter to the power input port on the back of the NAS, then plug the power cord into an electrical outlet.
4. Stiskněte tlačítko napájení na přední straně NASu pro jeho zapnutí.

Figure 3: Rear panel of the QNAP TS-233-US, highlighting the connectivity ports.

4.3. Počáteční konfigurace

After connecting the hardware, proceed with the software setup:

1. Download and install the QNAP Qfinder Pro utility on a computer connected to the same network as your NAS.
2. Use Qfinder Pro to locate your NAS on the network and initiate the setup wizard.
3. Follow the on-screen instructions to create an administrator account, configure network settings, and set up storage pools/volumes.
4. For mobile access, download the Qfile or Qphoto app from your device's app store and log in with your NAS credentials.

5. Obsluha NASu

5.1. File Storage and Management

The QNAP TS-233-US provides a central location for all your digital files. You can access and manage files through network shares, web browsers, or mobile apps.

5.2. Multimedia Streaming

Store and stream your photos, music, and videos directly from your NAS to various devices on your network, including smart TVs, computers, and mobile devices.

Figure 4: The QNAP TS-233-US as a central hub for multimedia collections.

5.3. Data Backup and Recovery

Implement robust backup strategies to protect your data:

• Zálohování systému Windows: Use QNAP’s NetBak Replicator software to back up data from your Windows computers.
• Mac Backup: The NAS supports Apple Time Machine for seamless backups from Mac devices.
• Snímky úložiště: Utilize QNAP’s snapshot technology to create point-in-time copies of your data, offering protection against accidental deletion or ransomware attacks.
• Zálohování do cloudu: Back up NAS files to various cloud services for off-site data protection.

Figure 5: The QNAP TS-233-US offers a comprehensive backup solution for various devices.

5.4. Vzdálený přístup

Přístup k vašemu files and multimedia from anywhere using the MyQNAPCloud service. This allows secure remote access to your NAS over the internet.

6. Údržba

6.1. Hard Drive Replacement

If a hard drive fails or you need to upgrade capacity, follow the installation steps in Section 4.1 to replace or add drives. Ensure the NAS is powered off before performing any hardware changes.

6.2. Aktualizace softwaru

Regularly check for and install firmware updates through the QTS operating system interface to ensure optimal performance, security, and access to new features.

6.3. Čištění

Periodically clean the exterior of the NAS with a soft, dry cloth. Ensure ventilation areas are free from dust and obstructions to maintain proper airflow and prevent overheating.

7. Řešení problémů

If you encounter issues with your QNAP TS-233-US, consider the following basic troubleshooting steps:

• Bez napájení: Check all power connections and ensure the power outlet is functional.
• Problémy s připojením k síti: Verify the Ethernet cable is securely connected to both the NAS and your router/switch. Restart your router and NAS.
• Cannot Access NAS: Ensure your computer is on the same network. Use Qfinder Pro to locate the NAS and check its IP address.
• Chyby disku: Consult the QTS Storage & Snapshots Manager for drive health status.

For more detailed troubleshooting and advanced issues, refer to the official QNAP support website or the comprehensive QTS user manual.

8. Specifikace

9. Záruka a podpora

9.1. Informace o záruce

The QNAP TS-233-US comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official QNAP webPodrobné podmínky týkající se záručního krytí a doby trvání naleznete na webových stránkách.

9.2. Technická podpora

For technical assistance, product updates, and additional resources, please visit the official QNAP support website. You can find FAQs, knowledge base articles, and contact information for customer support.

Official QNAP Webmísto: www.qnap.com