Konec produktuview
The Creality Ender-3 S1 Pro is an advanced FDM (Fused Deposition Modeling) 3D printer designed for high-temperature printing and enhanced user experience. It features a robust build, precise leveling capabilities, and a user-friendly interface, making it suitable for a wide range of printing projects.
Figure 1: The Creality Ender-3 S1 Pro 3D Printer actively printing a dolphin model.
Klíčové vlastnosti:
- 300°C High-Temperature Nozzle: Equipped with a brass nozzle capable of reaching 300°C, supporting a wide range of filaments including PLA, ABS, PVA, Wood, TPU, PETG, and PA.
- "Sprite" Full-metal Dual-gear Direct Extruder: Provides an 80N extrusion force for smooth and consistent filament feeding, particularly beneficial for flexible materials like TPU.
- CR Touch Automatic Leveling: Features a 16-point automatic leveling system that quickly compensates for bed height variations, ensuring optimal first layer adhesion.
- Spring Steel PEI Magnetic Build Plate: Offers excellent adhesion for printed models and allows for rapid heating. Its durable and flexible nature enables effortless removal of finished prints with a slight bend.
- 4.3-Inch Touch Screen & LED Light: A responsive touch screen with multi-language support provides intuitive UI interaction. An integrated LED light illuminates the print area for clear observation, even in low-light conditions.
- 32bitová tichá základní deska: Ensures quiet operation during printing.
- Filament Run-out Sensor: Automatically pauses printing when filament runs out, preventing failed prints.
- Funkce obnovení tisku: Allows the printer to resume printing from where it left off after a power outage.
Nastavení a montáž
The Ender-3 S1 Pro is designed for quick and easy assembly, with most components pre-installed. Follow the steps below to set up your printer.
Figure 2: Illustrated guide for the 96% pre-installed, six-step assembly of the printer.
Kroky počátečního nastavení:
- Rozbalení: Opatrně vyjměte všechny součásti z obalu a zkontrolujte je podle dodacího listu.
- Sestava rámu: Attach the gantry to the base using the provided screws.
- Extruder and Hotend Installation: Secure the Sprite direct extruder and hotend assembly to the X-axis carriage.
- Zapojení: Connect all cables according to the included wiring diagram. Ensure secure connections for the hotend, bed, motors, and sensors.
- Držák vlákna: Mount the filament spool holder on top of the gantry.
- Touch Screen Installation: Attach the 4.3-inch touch screen to the side of the printer base.
- Připojení napájení: Connect the power cable and ensure the voltage switch is set correctly for your region (115V or 230V).
For detailed visual instructions, refer to the official assembly video provided by Creality.
Video 1: Official Creality video demonstrating the features and operation of the Ender-3 S1 Pro 3D Printer.
Návod k obsluze
This section covers the basic steps to operate your Ender-3 S1 Pro 3D printer, from loading filament to starting your first print.
Zatížení vlákna:
- Umístěte cívku s filamentem na držák filamentu.
- Feed the filament through the filament run-out sensor.
- Press the lever on the "Sprite" direct extruder and insert the filament into the hotend until it comes out of the nozzle.
- On the touch screen, navigate to the "Prepare" menu and select "Preheat PLA" or "Preheat ABS" depending on your filament type.
Automatic Bed Leveling (CR Touch):
The CR Touch system simplifies bed leveling, ensuring a perfect first layer.
- Ujistěte se, že je konstrukční deska čistá.
- From the touch screen, select "Level" and then "CR Touch" to initiate the automatic leveling process. The printer will probe 16 points on the bed.
- After auto-leveling, perform a Z-offset adjustment if necessary to fine-tune the nozzle height.
Figure 3: The CR Touch sensor performing a 16-point automatic bed leveling scan.
Zahájení tisku:
- Prepare your 3D model using slicing software (e.g., Creality Slicer, Cura, Simplify3D) and save it as a .gcode file na SD kartu.
- Vložte SD kartu do slotu pro SD kartu v tiskárně.
- On the touch screen, select "Print" and choose your desired .gcode file.
- The printer will begin heating the nozzle and bed, then start printing.
Figure 4: The intuitive 4.3-inch color touch screen, providing easy access to printer controls and settings.
Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vaší 3D tiskárny.
- Vyčistěte konstrukční desku: After each print, allow the PEI magnetic build plate to cool and gently remove the print. Clean the surface with isopropyl alcohol to ensure good adhesion for future prints.
- Čištění trysek: Periodically clean the nozzle to prevent clogs. Use a brass brush to remove any filament residue from the exterior of the nozzle. For internal clogs, perform a cold pull or use a nozzle cleaning needle.
- Namažte pohyblivé části: Apply a small amount of lithium grease to the Z-axis lead screws and X/Y-axis rods every few months to ensure smooth movement.
- Zkontrolujte napnutí řemene: Ensure the X and Y-axis belts are properly tensioned. They should be taut but not overly tight.
- Aktualizace firmwaru: Zkontrolujte oficiální stránky Creality website for the latest firmware updates to ensure your printer has the most current features and bug fixes.
Odstraňování problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat, a jejich možnými řešeními.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Špatná přilnavost první vrstvy | Unleveled bed, dirty build plate, incorrect nozzle temperature, incorrect Z-offset. | Perform CR Touch auto-leveling, clean the build plate with isopropyl alcohol, adjust nozzle/bed temperatures, fine-tune Z-offset. |
| Ucpávání filamentu | Dust in filament, heat creep, worn nozzle, incorrect retraction settings. | Clean the nozzle, ensure proper cooling, replace worn nozzle, adjust retraction settings in slicer. |
| Posun vrstev | Loose belts, motor overheating, print speed too high, physical obstruction. | Check and tighten X/Y-axis belts, ensure proper ventilation for motors, reduce print speed, clear any obstructions. |
| Extruder Fan Not Working | Loose connection, fan failure. | Check fan connections to the hotend board. If still not working, the fan may need replacement. |
Specifikace
| Funkce | Specifikace |
|---|---|
| Technologie lisování | FDM (Fused Deposition Modeling) |
| Build Volume | 220 x 220 x 270 mm (8.66 x 8.66 x 10.63 palce) |
| Teplota trysky | Do 300°C |
| Teplota vyhřívané podložky | Do 110°C |
| Režim vyrovnávání | CR Touch Automatic Leveling |
| Zobrazit | 4.3palcový barevný dotykový displej |
| Základní deska | 32-bit Silent Motherboard |
| Extruder | "Sprite" Full-metal Dual-gear Direct Extruder (80N extrusion force) |
| Vytvořit povrch | Spring Steel PEI Magnetic Build Plate |
| Podporované filamenty | PLA, ABS, WOOD, TPU, PETG, PA |
| Rychlost tisku | Maximum 150 mm/s |
| Přesnost tisku | ±0.1 mm |
| Jmenovitý výkon | 350W/24V |
| Hmotnost položky | 8.6 kilogramů (18.92 liber) |
Figure 5: Detailed dimensions of the Ender-3 S1 Pro 3D Printer.
Záruka a podpora
For warranty information, technical support, and service inquiries, please refer to the official Creality 3D webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.
Výrobce: Creality 3D
Datum první dostupnosti: 26. února 2022
