Návod k obsluze ultratichého nástěnného konvektoru Stelpro (ASHC2002W)

1. Úvod a konecview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Bezpečnostní informace

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Před instalací nebo použitím tohoto ohřívače si přečtěte všechny pokyny.
• Před instalací nebo údržbou se ujistěte, že je hlavní jistič odpojen od napájení.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• Tento ohřívač je určen pouze pro vnitřní použití.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Obsah balení

Po otevření balení ověřte, zda jsou všechny součásti přítomny a nepoškozené:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• Montážní materiál (šrouby, hmoždinky)
• Návod k použití

4. Specifikace

Obrázek 4.1: Rozměry produktu

5. Instalace

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 Montáž ohřívače

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. Připevněte montážní držák ke zdi pomocí dodaných šroubů.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 Elektrické zapojení

1. Ujistěte se, že je hlavní jistič VYPNUTÝ.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Zajistěte všechna připojení a ujistěte se, že žádné holé vodiče nejsou odkryté.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. Obnovte napájení hlavním jističem.

6. Návod k obsluze

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 Nastavení teploty

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• Ohřívač bude automaticky udržovat nastavenou teplotu.

6.2 Provozní režimy

• Automatický režim: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• Bezpečnostní režim: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho ohřívače.

• Čištění: Ensure the heater is turned off and cool before cleaning. Use a soft, damp hadříkem k otření vnějšího povrchu. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• Roční kontrola: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. Řešení problémů

If your heater is not operating correctly, consult the following common issues before contacting support:

• Ohřívač se nezapne: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• Nedostatečné teplo: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• Neobvyklé zvuky: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Problémy s displejem termostatu: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Záruka a podpora

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• 5letá omezená záruka on the overall unit.
• Doživotní záruka na topném tělese.
• 3-letá záruka na elektronických součástkách.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webmísto.