Zavedení
Welcome to the user manual for your new Teka Ceramic Grill, model GZC 85330 XBB. This high-efficiency gas cooktop is designed to provide precise cooking control with its Schott Ceran beveled glass-ceramic surface, robust cast iron grills, and advanced SABAF burners featuring ExactFlame technology. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your appliance. Please read it thoroughly before use.
Důležité bezpečnostní informace
Always prioritize safety when operating gas appliances. Failure to follow these instructions could result in fire, explosion, electric shock, or other injuries.
- Profesionální instalace: This appliance must be installed by a qualified technician in accordance with all local codes and regulations.
- Zásobování plynem: Ensure the gas type (LP or Natural) matches the appliance's configuration. Check for gas leaks after installation using a soapy water solution, never an open flame.
- Větrání: Ensure adequate ventilation in the kitchen area. Do not obstruct ventilation openings.
- Horké povrchy: The cooktop surface, grates, and surrounding areas will become hot during and after use. Allow sufficient time for cooling before cleaning or touching.
- Děti a domácí mazlíčci: Během provozu a ochlazování držte děti a domácí zvířata v dostatečné vzdálenosti od spotřebiče.
- Bezpečnost termočlánků: Each burner is equipped with a thermocouple safety device that automatically cuts off the gas supply if the flame accidentally extinguishes.
- Hořlavé materiály: Do not store or use flammable materials near the cooktop.
Konec produktuview
Vlastnosti
- Schott Ceran front beveled glass-ceramic surface for durability and elegant design.
- 5 high-efficiency gas burners with 9 distinct power levels for versatile cooking.
- ExactFlame technology for precise flame control, allowing fine-tuning of heat intensity.
- Electronic ignition integrated into each control knob for convenient and quick startup.
- Thermocouple safety system on each burner, automatically cutting off gas if the flame goes out.
- Robust cast iron grills providing stable support for cookware and excellent heat retention.
Komponenty
Your Teka Ceramic Grill consists of the following main components:
- Sklokeramický povrch: The main cooking surface made of Schott Ceran glass.
- Cast Iron Grills: Removable grates that sit over the burners to support cookware.
- Hořáky: Five gas burners of varying sizes and power outputs (Auxiliary, Fast, Dual Flame).
- Ovládací knoflíky: Located at the front, used to ignite and adjust flame intensity for each burner.
- Systém zapalování: Integrated electronic ignition for easy burner lighting.
- Thermocouple Sensors: Safety devices located near each burner to detect flame presence.
Obrázek 1: Shora dolů view of the Teka GZC 85330 XBB cooktop with burners in operation.
Figure 2: Key features and dimensions of the Teka GZC 85330 XBB cooktop.
Obrázek 3: Úhlové view of the Teka GZC 85330 XBB cooktop.
Instalace
Installation of this gas appliance must be performed by a certified professional to ensure safety and compliance with all local building and gas codes. Incorrect installation can lead to serious hazards.
Kontroly před instalací
- Verify that the gas supply type (LP or Natural) matches the appliance's specifications.
- Ensure the kitchen area has adequate ventilation.
- Confirm that the countertop cutout dimensions are correct for the appliance.
Rozměry a výřez
The cooktop requires a specific cutout in your countertop. Refer to the diagram below for precise measurements.
Figure 4: Installation dimensions and required countertop cutout.
- Rozměry produktu (H x Š x V): 51 cm x 75 cm x 5 cm
- Doporučené rozměry výřezu: Approximately 48 cm (Depth) x 57 cm (Width)
Připojení plynu
Connect the appliance to the gas supply using appropriate fittings and flexible connectors, ensuring all connections are tight and leak-free. A gas leak test must be performed by the installer.
Elektrické připojení
The cooktop requires an electrical connection for the electronic ignition system. Ensure the voltage matches the appliance's requirements (127 Volt).
Návod k obsluze
Zapálení hořáku
Chcete-li zapálit hořák:
- Place your cookware on the desired cast iron grate.
- Push down the corresponding control knob and turn it counter-clockwise to the maximum flame position. You will hear a clicking sound as the electronic igniter sparks.
- Hold the knob down for a few seconds after the flame ignites to allow the thermocouple to heat up and activate the safety valve. Release the knob. If the flame extinguishes, repeat the process, holding the knob down slightly longer.
Figure 5: Close-up of control knobs and burner flame.
Adjusting Flame Intensity (ExactFlame)
The ExactFlame system allows you to precisely control the flame intensity with 9 power levels. Once the burner is lit, rotate the control knob to select your desired heat level from 1 (minimum) to 9 (maximum). This provides optimal control for various cooking tasks.
Vypnutí hořáku
To turn off a burner, simply rotate the control knob clockwise until it clicks into the "off" position. The gas supply will be cut off.
Údržba a čištění
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Teka cooktop.
Obecné tipy pro čištění
- Před čištěním se vždy ujistěte, že je varná deska vychladlá.
- Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the glass surface and other components.
- Rozlité tekutiny ihned setřete, aby se nepřipálily na povrch.
Čištění sklokeramického povrchu
Use a soft cloth or sponge with warm soapy water or a specialized ceramic cooktop cleaner. For stubborn stains, a ceramic scraper can be used carefully at an angle. Rinse thoroughly and dry with a clean cloth to prevent water spots.
Cleaning Cast Iron Grills and Burner Caps
The cast iron grills and burner caps can be removed for cleaning. Wash them with warm soapy water and a non-abrasive brush. Dry them completely before placing them back on the cooktop to prevent rust.
Burner Ports and Igniters
Periodically check that the burner ports are not clogged. Use a small brush or needle to clear any debris. Ensure the igniter electrodes are clean and dry for proper sparking.
Odstraňování problémů
Before contacting service, please refer to the following common issues and their potential solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Hořák se nezapálí. | No gas supply; Igniter clogged or wet; Power outage; Knob not held down long enough. | Check gas valve; Clean igniter and burner ports; Check power supply; Hold knob down for 3-5 seconds after flame appears. |
| Burner ignites but flame goes out when knob is released. | Thermocouple not heated sufficiently; Thermocouple faulty. | Hold knob down longer (5-10 seconds) to allow thermocouple to heat; If problem persists, contact service. |
| Irregular or yellow flame. | Burner ports clogged; Incorrect gas pressure; Incorrect gas type. | Clean burner ports; Contact a qualified technician to check gas pressure and type. |
| Zjištěn zápach plynu. | Ůnik plynu. | Immediately turn off gas supply, open windows, do not operate electrical switches, and contact emergency services or a qualified technician. |
For issues not listed here or if solutions do not resolve the problem, please contact a qualified service technician.
Specifikace
| Značka | Teka |
| Číslo modelu | GZC 85330 XBB |
| Barva | Černý |
| Materiál | Tempered Glass (Schott Ceran) |
| Materiál povrchu topného tělesa | Skleněná keramika |
| Počet topných těles | 5 |
| Zdroj napájení | Plynový pohon |
| Typ paliva | LP (Butane/Propane) or Natural Gas |
| svtage | 127 voltů |
| Celkový výkon | 11300.00 W (or BTU equivalent, sum of burners) |
| Konfigurace hořáku | 1 x 2,800W Fast Burner (9,554 BTU), 1 x 4,000W Dual Flame Burner (13,649 BTU), 1 x Auxiliary Burner 1,000W (3,412 BTU), plus two additional burners. |
| Hmotnost položky | 13.5 kg |
| Rozměry produktu (D x Š x V) | 51 cm x 75 cm x 5 cm |
Záruka a podpora
For information regarding the product warranty, please refer to the warranty card included with your appliance or contact your retailer or Teka customer service directly. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or service requests, please contact Teka's authorized service center in your region. Contact details can typically be found on the Teka official webna webu nebo prostřednictvím místního distributora.
