1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your HALO LT4069FS351EWHR 4-inch Recessed LED Retrofit Downlight. This all-in-one LED trim is designed to replace existing can lighting fixtures, offering selectable color temperature options and dimming capabilities. It is suitable for both indoor and outdoor applications, including wet locations like showers.
2. Důležité bezpečnostní informace
- VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
- VAROVÁNÍ: Risk of fire. Use only in circuits specified in the product specifications.
- Installation must be performed by a qualified electrician in accordance with national and local electrical codes.
- Do not modify or alter the fixture.
- Ensure the fixture is securely installed to prevent falling.
- Toto zařízení není určeno pro použití s nouzovými východy.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- HALO 4-inch Recessed LED Retrofit Downlight (LT4069FS351EWHR)
- Edison Base Adapter (for screw-in installation)
- Návod k použití
Figure 1: HALO 4-inch Recessed LED Retrofit Downlight with Edison base adapter and quick connectors.
4. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | SVATOZÁŘ |
| Číslo modelu | LT4069FS351EWHR |
| Velikost | 4 palců |
| Teplota barev (CCT) | 3000K (Warm White), 4000K (Bright White), 5000K (Daylight) - Selectable |
| Jas | 665 XNUMX lumenů |
| Wattage | 7.57 wattů |
| svtage | 120 voltů |
| Stmívatelné | Yes (to 10% with compatible 120V dimming switch) |
| Vnitřní/venkovní použití | Outdoor (Water Resistant) |
| Typ instalace | Retrofit |
| Materiál | Plast |
| Rozměry produktu | 3.87 cm D x 3.87 cm Š x 1.87 cm V |
| Hmotnost položky | 8.4 unce |
Figure 2: Product dimensions showing height of 3.15 inches and width of 5.31 inches.
Figure 3: Technical drawing illustrating the side and top view with precise measurements in inches and millimeters.
5. Nastavení a instalace
Follow these steps to install your HALO Recessed LED Retrofit Downlight:
- Vypnout napájení: Before starting, ensure the power to the existing fixture is turned off at the circuit breaker.
- Odebrat stávající zařízení: Carefully remove your old recessed lighting trim and bulb from the housing.
- Připojení adaptéru: If your existing housing uses an Edison screw-in socket, screw the provided Edison base adapter into the socket.
- Vyberte teplotu barev: Locate the CCT (Color Correlated Temperature) switch on the back of the LED fixture. Choose your desired color temperature (3000K, 4000K, or 5000K) by sliding the switch. It is recommended to set this before final installation.
- Připojení kabeláže: Connect the quick connectors from the LED fixture to the corresponding connectors from the Edison base adapter or directly to the housing wiring if applicable. Ensure a secure connection.
- Vložit přípravek: Gently push the LED retrofit downlight into the existing recessed housing. The spring clips on the sides of the fixture will secure it in place.
- Obnovit napájení: Znovu zapněte napájení na jističi.
Figure 4: Visual guide showing the four main steps of installation: screwing in the adapter, connecting wires, inserting the fixture, and securing the trim.
Figure 5: Close-up of the CCT switch on the back of the fixture, allowing selection between 3000K, 4000K, and 5000K.
6. Návod k obsluze
Once installed, your HALO LED downlight is ready for use:
- Zapnutí/vypnutí: Operate the light using your standard wall switch.
- Stmívání: If connected to a compatible 120V dimming switch (not included), you can adjust the light output from 100% down to 10%.
- Teplota barev: The chosen color temperature (3000K, 4000K, or 5000K) will remain set until manually changed via the switch on the fixture.
7. Údržba
The HALO LED Retrofit Downlight requires minimal maintenance:
- Čištění: Před čištěním se ujistěte, že je zařízení vypnuté. Otřete svítidlo měkkým hadříkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Životnost LED diod: The integrated LED is designed for long life and does not require bulb replacement.
8. Řešení problémů
If you encounter issues with your downlight, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí | No power to the fixture; Loose wiring connection; Faulty switch | Check circuit breaker; Verify all wire connections are secure; Test the wall switch. |
| Světlo bliká nebo bliká | Incompatible dimmer switch; Loose wiring; Overheating | Ensure dimmer is LED compatible; Check wiring connections; Ensure proper airflow around the fixture. |
| Nesprávná teplota barev | Nesprávně nastavený spínač CCT | Turn off power, remove fixture, and adjust the CCT switch on the back. |
9. Informace o záruce
This HALO product is backed by a 5letá omezená záruka. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official HALO webmísto.
10. Zákaznická podpora
For technical assistance, troubleshooting, or warranty claims, please contact HALO customer service. Contact information can typically be found on the product packaging or the official HALO webmísto.
